单声道(mono)与双声道(stereo)的区别

最新推荐文章于 2024-10-31 14:57:54 发布

weixin_34351321

最新推荐文章于 2024-10-31 14:57:54 发布

阅读量8.2k

点赞数 3

文章标签： c# 游戏 java

原文链接：http://blog.51cto.com/xwandrew/2049746

版权

本文详细解释了单声道和立体声的区别。单声道使用单一通道进行声音的录制与播放，即使通过多个扬声器播放，所有扬声器输出的声音也完全相同；而立体声则利用多个通道（通常为两个），通过不同比例地将信号发送到左右扬声器来实现声音的方向性和空间感。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

The difference is in the number of channels (signals) used. Mono uses one, stereo uses more than one.

In monaural sound one single channel is used. It can be reproduced through several speakers, but all speakers are still reproducing the same copy of the signal.
In stereophonic sound more channels are used (typically two). You can use two different channels and make one feed one speaker and the second channel feed a second speaker (which is the most common stereo setup). This is used to create directionality, perspective, space.
Here is an example using a two speaker setup.

mono
单声道(mono)与双声道(stereo)的区别

stereo
单声道(mono)与双声道(stereo)的区别

More technically, true stereo means sound recording and sound reproduction that uses stereographic projection to encode the relative positions of objects and events recorded.

In a common stereo setup of two channels: left and right, one channel is sent to the left speaker and the other channel is sent to the right speaker. Now, by controlling to which channel you send the signal you can control the position of the sound. You'll hear sounds coming from different directions depending on which speaker you send the signal to, or in which proportion (you can send just a little more to the right speaker, so the sound is positioned just a little bit to the right). Sounds with equal proportions on both speakers will appear to come from the center.

In other words, stereo opens the possibility of playing with sound localization.

转载于:https://blog.51cto.com/xwandrew/2049746