首先请重启设备后重新尝试:请注意是输入boot -s
When prompted to enter Loader mode hit the bar and you will be
sitting at the "loader>" prompt. Enter the following command:
loader> boot -s
Enter full pathname of shell or 'recovery' for root password recovery or
RETURN for /bin/sh:
然后输入recovery看能否正常恢复。
如果以上操作不成功,则需要通过TFTP重新传输JUNOS回退到之前可正常运行的版本:
1、Prepare a TFTP server and put the corresponding p_w_picpath in the TFTP root
directory
Example: The TFTP server has an IP address of 192.168.100.1/24 and the
p_w_picpath is jinstall-ex-9.1R2.7-domestic-signed.tgz
2、Connect the EX-Series Switch management port to the TFTP server directly
or make sure they are in same b
When prompted to enter Loader mode hit the bar and you will be
sitting at the "loader>" prompt. Enter the following command:
loader> boot -s
Enter full pathname of shell or 'recovery' for root password recovery or
RETURN for /bin/sh:
然后输入recovery看能否正常恢复。
如果以上操作不成功,则需要通过TFTP重新传输JUNOS回退到之前可正常运行的版本:
1、Prepare a TFTP server and put the corresponding p_w_picpath in the TFTP root
directory
Example: The TFTP server has an IP address of 192.168.100.1/24 and the
p_w_picpath is jinstall-ex-9.1R2.7-domestic-signed.tgz
2、Connect the EX-Series Switch management port to the TFTP server directly
or make sure they are in same b