virbr0怎么关闭_kvm下关闭virbr0与打开virbr0

[root@nfs ~]# virsh net-list

Name                 State      Autostart

-----------------------------------------

default              active     yes

[root@nfs ~]# brctl show     ##显然有两个网桥

bridge name     bridge id               STP enabled     interfaces

br0             8000.00e06f12ac8a       no              eth0

virbr0          8000.52540011b2f3       yes             virbr0-nic

[root@nfs ~]# ifconfig

br0       Link encap:Ethernet  HWaddr 00:E0:6F:12:AC:8A

inet addr:192.168.1.62  Bcast:192.168.1.255  Mask:255.255.255.0

inet6 addr: fe80::2e0:6fff:fe12:ac8a/64 Scope:Link

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:1052 errors:0 dropped:0 overruns:0 frame:0

TX packets:533 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:117606 (114.8 KiB)  TX bytes:66566 (65.0 KiB)

eth0    Link encap:Ethernet  HWaddr 00:E0:6F:12:AC:8A

inet6 addr: fe80::2e0:6fff:fe12:ac8a/64 Scope:Link

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:1410 errors:0 dropped:0 overruns:0 frame:0

TX packets:1155 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:360872 (352.4 KiB)  TX bytes:136226 (133.0 KiB)

Interrupt:28 Base address:0xc000

lo        Link encap:Local Loopback

inet addr:127.0.0.1  Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING  MTU:16436  Metric:1

RX packets:107 errors:0 dropped:0 overruns:0 frame:0

TX packets:107 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:11824 (11.5 KiB)  TX bytes:11824 (11.5 KiB)

virbr0  Link encap:Ethernet  HWaddr 52:54:00:11:B2:F3

inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0