在尝试使用Android 8.1进行EDP（Embedded Display Port）调试时，遇到了一系列与连接和显示相关的问题。设备在启动过程中报告了关于UBOOT DRM驱动、显示时钟频率、物理接口以及Analogix DP的AUX通道通信错误。在尝试建立eDP链接训练时，不断出现'link training failed (-110)'的错误，表明连接未成功建立。
ockchip UBOOT DRM driver version: develop-v1.0.0
failed to find phy node
delay prepare[0] unprepare[0] enable[0] disable[0]
read logo on state from dts [1]
no fuel gauge found
Using display timing from compatible panel driver
Detailed mode clock 200000 kHz, flags[a]
H: 1536 1548 1564 1612
V: 2048 2056 2060 2068
bus_format: 1009
rk lcdc - 0 dclk set: dclk = 200000000HZ, pll select = 1, div = 1
AUX CH command reply failed!
analogix_dp_read_byte_from_dpcd: Aux Transaction fail!
AUX CH command reply failed!
analogix_dp_read_byte_from_dpcd: Aux Transaction fail!
analogix_dp_read_byte_from_dpcd: Aux Transaction fail!
AUX CH command reply failed!
analogix_dp_read_byte_from_dpcd: Aux Transaction fail!
analogix_dp_read_byte_from_dpcd: Aux Transaction fail!
AUX CH command reply fai
最低0.47元/天 解锁文章
扫一扫
4598
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
