1：数据同步的原理：
当Primary节点完成数据操作后，Secondary会做出一系列的动作保证数据的同步：
1：检查自己local库的oplog.rs集合找出最近的时间戳。
2：检查Primary节点local库oplog.rs集合，找出大于此时间戳的记录。
3：将找到的记录插入到自己的oplog.rs集合中，并执行这些操作。
2：查看副本集的信息
gechongrepl:PRIMARY> rs.status()
{
"set" : "gechongrepl",
"date" : ISODate("2015-07-02T02:38:15Z"),
"myState" : 1,
"members" : [
{
"_id" : 6,
"name" : "192.168.91.144:27017",
"health" : 1,
"state" : 7,
"stateStr" : "ARBITER",
"uptime" : 1678,
"lastHeartbeat" : ISODate("2015-07-02T02:38:14Z"),
"lastHeartbeatRecv" : ISODate("2015-07-02T02:38:14Z"),
"pingMs" : 1
},
{
"_id" : 10,
"name" : "192.168.91.135:27017",
"health" : 1,
"state" : 2,
"stateStr" : "SECONDARY",
"uptime" : 1678,
"optime" : Timestamp(1435803750, 1),
"optimeDate" : ISODate("2015-07-02T02:22:30Z"),
"lastHeartbeat" : ISODate("2015-07-02T02:38:14Z"),
"lastHeartbeatRecv" : ISODate("2015-07-02T02:38:13Z"),
"pingMs" : 1,
"syncingTo" : "192.168.91.148:27017"
},
{
"_id" : 11,
"name" : "192.168.91.148:27017",
"health" : 1,
"state" : 1,
"stateStr" : "PRIMARY",
"uptime" : 1698,
"optime" : Timestamp(1435803750, 1),
"optimeDate" : ISODate("2015-07-02T02:22:30Z"),
"electionTime" : Timestamp(1435803023, 1),
"electionDate" : ISODate("2015-07-02T02:10:23Z"),
"self" : true
},
{
"_id" : 12,
"name" : "192.168.91.134:27017",
"health" : 1,
"state" : 2,
"stateStr" : "SECONDARY",
"uptime" : 1655,
"optime" : Timestamp(1435803750, 1),
"optimeDate" : ISODate("2015-07-02T02:22:30Z"),
"lastHeartbeat" : ISODate("2015-07-02T02:38:14Z"),
"lastHeartbeatRecv" : ISODate("2015-07-02T02:38:14Z"),
"pingMs" : 1,
"syncingTo" : "192.168.91.135:27017"
}
],
"ok" : 1
}
myState：1表示primary
state：1表示primary；7表示arbiter
uptime：成员的在线时间
lastHeartbeat：当前实例到远端最近一次成功接收到心跳包的时间
pingMs：本实例到远端路由包的来回时间
optime：读取oplog.rs集合。本实例最近一次的更改时间。
MongoDB通过lastHeartbeat来实现自动转移。
mongod实例每隔两秒就会向其他成员发送一个心跳包，并且通过rs.status()中返回的成员的health来判断成员的状态。如果primary节点不可用了，那么复制集中的所有secondary节点都会触发一次选举操作。选出新的primary节点。如果secondary节点有多个，则会选举拥有最新oplog时间戳记录的或者有较高权限的节点成为primary（注意：如果secondary停止时间过长，导致primary节点的oplog内容被循环写覆盖掉，则需要手动同步secondary节点）
MongoDB数据同步的过程：
1：拉去同步节点的oplog。例如：Secondary节点拉去Primary节点的oplog。
2：将拉去的oplog写入到自己的oplog中。例如：Secondary节点从Primary拉去的oplog写入到自己的oplog。
3：请求下一个oplog同步到哪里。例如：Secondary会请求Primary节点同步到哪里了？
Secondary节点同步到哪了：
1：Primary节点插入一条数据
2：同时，会把该数据写入到Primary的oplog中，并且记录一个时间戳
3：db.runCommand({getlasterror:1,w:2})在Primary节点被调用时，Primary就完成了写入操作，等待其他非仲裁节点来同步数据
4：Secondary节点查询Primary的oplog并且拉去oplog
5：Secondary根据时间戳应用oplog
6：Secondary请求大于本身oplog时间戳的oplog
7：Primary更新时间戳
初始化同步：
1：新增加的节点或者oplog同步时候被覆写的时候都会进行初始化同步。
2：从源节点取最新的oplog time，标记为start。
3：从源节点克隆所有的数据到目标节点
4：在目标节点建立索引
5：取目标节点最新的oplog time，标记为minValid。
6：在目标节点执行start到minValid的oplog（应该是复制过来还没有执行的oplog，没有完成最终一致性的那部分，就是一个oplog replay的过程）
7：成为正常成员
官方的初始化同步3步：
在新节点上执行
Initial Sync
Initial sync copies all the data from one member of the replica set to another member. A member uses initial sync when the member has no data, such as when the member is new, or when the member has data but is missing a history of the set’s replication.
When you perform an initial sync, MongoDB:
1：Clones all databases. To clone, the mongod queries every collection in each source database and inserts all data into its own copies of these collections. At this time, _id indexes are also built. The clone process only copies valid data, omitting invalid documents.
2：Applies all changes to the data set. Using the oplog from the source, the mongod updates its data set to reflect the current state of the replica set.
3：Builds all indexes on all collections (except _id indexes, which were already completed).
When the mongod finishes building all index builds, the member can transition to a normal state, i.e. secondary.
从哪个成员来同步数据（Who to sync from）
MongoDB初始化同步数据的时候，可能从主节点同步，也可能是从从节点同步，根据最近的原则，选择最邻近节点去同步数据。（基于ping值）
同时也可以指定从哪个节点来同步数据：
db.adminCommand( { replSetSyncFrom: "[hostname]:[port]" } )
或者
rs.syncFrom("[hostname]:[port]")
初始化同步的源码：http://dl.mongodb.org/dl/src/
C:\Users\John\Desktop\mongodb-src-r2.6.3\src\mongo\db\repl\rs_initialsync.cpp
rs_initialsync.cpp
/**
* Copyright (C) 2008 10gen Inc.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License, version 3,
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* As a special exception, the copyright holders give permission to link the
* code of portions of this program with the OpenSSL library under certain
* conditions as described in each individual source file and distribute
* linked combinations including the program with the OpenSSL library. You
* must comply with the GNU Affero General Public License in all respects for
* all of the code used other than as permitted herein. If you modify file(s)
* with this exception, you may extend this exception to your version of the
* file(s), but you are not obligated to do so. If you do not wish to do so,
* delete this exception statement from your version. If you delete this
* exception statement from all source files in the program, then also delete
* it in the license file.
*/
#include "mongo/pch.h"
#include "mongo/db/repl/rs.h"
#include "mongo/db/auth/authorization_manager.h"
#include "mongo/db/auth/authorization_manager_global.h"
#include "mongo/db/client.h"
#include "mongo/db/cloner.h"
#include "mongo/db/dbhelpers.h"
#include "mongo/db/repl/bgsync.h"
#include "mongo/db/repl/oplog.h"
#include "mongo/db/repl/oplogreader.h"
#include "mongo/bson/optime.h"
#include "mongo/db/repl/replication_server_status.h" // replSettings
#include "mongo/db/repl/rs_sync.h"
#include "mongo/util/mongoutils/str.h"
namespace mongo {
using namespace mongoutils;
using namespace bson;
void dropAllDatabasesExceptLocal();
// add try/catch with sleep
void isyncassert(const string& msg, bool expr) {
if( !expr ) {
string m = str::stream() << "initial sync " << msg;
theReplSet->sethbmsg(m, 0);
uasserted(13404, m);
}
}
void ReplSetImpl::syncDoInitialSync() {
static const int maxFailedAttempts = 10;
createOplog();
int failedAttempts = 0;
while ( failedAttempts < maxFailedAttempts ) {
try {
_syncDoInitialSync();
break;
}
catch(DBException& e) {
failedAttempts++;
str::stream msg;
msg << "initial sync exception: ";
msg << e.toString() << " " << (maxFailedAttempts - failedAttempts) << " attempts remaining" ;
sethbmsg(msg, 0);
sleepsecs(30);
}
}
fassert( 16233, failedAttempts < maxFailedAttempts);
}
bool ReplSetImpl::_syncDoInitialSync_clone(Cloner& cloner, const char *master,
const list<string>& dbs, bool dataPass) {
for( list<string>::const_iterator i = dbs.begin(); i != dbs.end(); i++ ) {
string db = *i;
if( db == "local" )
continue;
if ( dataPass )
sethbmsg( str::stream() << "initial sync cloning db: " << db , 0);
else
sethbmsg( str::stream() << "initial sync cloning indexes for : " << db , 0);
Client::WriteContext ctx(db);
string err;
int errCode;
CloneOptions options;
options.fromDB = db;
options.logForRepl = false;
options.slaveOk = true;
options.useReplAuth = true;
options.snapshot = false;
options.mayYield = true;
options.mayBeInterrupted = false;
options.syncData = dataPass;
options.syncIndexes = ! dataPass;
if (!cloner.go(ctx.ctx(), master, options, NULL, err, &errCode)) {
sethbmsg(str::stream() << "initial sync: error while "
<< (dataPass ? "cloning " : "indexing ") << db
<< ". " << (err.empty() ? "" : err + ". ")
<< "sleeping 5 minutes" ,0);
return false;
}
}
return true;
}
void _logOpObjRS(const BSONObj& op);
static void emptyOplog() {
Client::WriteContext ctx(rsoplog);
Collection* collection = ctx.ctx().db()->getCollection(rsoplog);
// temp
if( collection->numRecords() == 0 )
return; // already empty, ok.
LOG(1) << "replSet empty oplog" << rsLog;
collection->details()->emptyCappedCollection(rsoplog);
}
bool Member::syncable() const {
bool buildIndexes = theReplSet ? theReplSet->buildIndexes() : true;
return hbinfo().up() && (config().buildIndexes || !buildIndexes) && state().readable();
}
const Member* ReplSetImpl::getMemberToSyncTo() {
lock lk(this);
// if we have a target we've requested to sync from, use it
if (_forceSyncTarget) {
Member* target = _forceSyncTarget;
_forceSyncTarget = 0;
sethbmsg( str::stream() << "syncing to: " << target->fullName() << " by request", 0);
return target;
}
const Member* primary = box.getPrimary();
// wait for 2N pings before choosing a sync target
if (_cfg) {
int needMorePings = config().members.size()*2 - HeartbeatInfo::numPings;
if (needMorePings > 0) {
OCCASIONALLY log() << "waiting for " << needMorePings << " pings from other members before syncing" << endl;
return NULL;
}
// If we are only allowed to sync from the primary, return that
if (!_cfg->chainingAllowed()) {
// Returns NULL if we cannot reach the primary
return primary;
}
}
// find the member with the lowest ping time that has more data than me
// Find primary's oplog time. Reject sync candidates that are more than
// maxSyncSourceLagSecs seconds behind.
OpTime primaryOpTime;
if (primary)
primaryOpTime = primary->hbinfo().opTime;
else
// choose a time that will exclude no candidates, since we don't see a primary
primaryOpTime = OpTime(maxSyncSourceLagSecs, 0);
if (primaryOpTime.getSecs() < static_cast<unsigned int>(maxSyncSourceLagSecs)) {
// erh - I think this means there was just a new election
// and we don't yet know the new primary's optime
primaryOpTime = OpTime(maxSyncSourceLagSecs, 0);
}
OpTime oldestSyncOpTime(primaryOpTime.getSecs() - maxSyncSourceLagSecs, 0);
Member *closest = 0;
time_t now = 0;
// Make two attempts. The first attempt, we ignore those nodes with
// slave delay higher than our own. The second attempt includes such
// nodes, in case those are the only ones we can reach.
// This loop attempts to set 'closest'.
for (int attempts = 0; attempts < 2; ++attempts) {
for (Member *m = _members.head(); m; m = m->next()) {
if (!m->syncable())
continue;
if (m->state() == MemberState::RS_SECONDARY) {
// only consider secondaries that are ahead of where we are
if (m->hbinfo().opTime <= lastOpTimeWritten)
continue;
// omit secondaries that are excessively behind, on the first attempt at least.
if (attempts == 0 &&
m->hbinfo().opTime < oldestSyncOpTime)
continue;
}
// omit nodes that are more latent than anything we've already considered
if (closest &&
(m->hbinfo().ping > closest->hbinfo().ping))
continue;
if (attempts == 0 &&
(myConfig().slaveDelay < m->config().slaveDelay || m->config().hidden)) {
continue; // skip this one in the first attempt
}
map<string,time_t>::iterator vetoed = _veto.find(m->fullName());
if (vetoed != _veto.end()) {
// Do some veto housekeeping
if (now == 0) {
now = time(0);
}
// if this was on the veto list, check if it was vetoed in the last "while".
// if it was, skip.
if (vetoed->second >= now) {
if (time(0) % 5 == 0) {
log() << "replSet not trying to sync from " << (*vetoed).first
<< ", it is vetoed for " << ((*vetoed).second - now) << " more seconds" << rsLog;
}
continue;
}
_veto.erase(vetoed);
// fall through, this is a valid candidate now
}
// This candidate has passed all tests; set 'closest'
closest = m;
}
if (closest) break; // no need for second attempt
}
if (!closest) {
return NULL;
}
sethbmsg( str::stream() << "syncing to: " << closest->fullName(), 0);
return closest;
}
void ReplSetImpl::veto(const string& host, const unsigned secs) {
lock lk(this);
_veto[host] = time(0)+secs;
}
/**
* Replays the sync target's oplog from lastOp to the latest op on the sync target.
*
* @param syncer either initial sync (can reclone missing docs) or "normal" sync (no recloning)
* @param r the oplog reader
* @param source the sync target
* @param lastOp the op to start syncing at. replset::InitialSync writes this and then moves to
* the queue. replset::SyncTail does not write this, it moves directly to the
* queue.
* @param minValid populated by this function. The most recent op on the sync target's oplog,
* this function syncs to this value (inclusive)
* @return if applying the oplog succeeded
*/
bool ReplSetImpl::_syncDoInitialSync_applyToHead( replset::SyncTail& syncer, OplogReader* r,
const Member* source, const BSONObj& lastOp ,
BSONObj& minValid ) {
/* our cloned copy will be strange until we apply oplog events that occurred
through the process. we note that time point here. */
try {
// It may have been a long time since we last used this connection to
// query the oplog, depending on the size of the databases we needed to clone.
// A common problem is that TCP keepalives are set too infrequent, and thus
// our connection here is terminated by a firewall due to inactivity.
// Solution is to increase the TCP keepalive frequency.
minValid = r->getLastOp(rsoplog);
} catch ( SocketException & ) {
log() << "connection lost to " << source->h().toString() << "; is your tcp keepalive interval set appropriately?";
if( !r->connect(source->h().toString()) ) {
sethbmsg( str::stream() << "initial sync couldn't connect to " << source->h().toString() , 0);
throw;
}
// retry
minValid = r->getLastOp(rsoplog);
}
isyncassert( "getLastOp is empty ", !minValid.isEmpty() );
OpTime mvoptime = minValid["ts"]._opTime();
verify( !mvoptime.isNull() );
OpTime startingTS = lastOp["ts"]._opTime();
verify( mvoptime >= startingTS );
// apply startingTS..mvoptime portion of the oplog
{
try {
minValid = syncer.oplogApplication(lastOp, minValid);
}
catch (const DBException&) {
log() << "replSet initial sync failed during oplog application phase" << rsLog;
emptyOplog(); // otherwise we'll be up!
lastOpTimeWritten = OpTime();
lastH = 0;
log() << "replSet cleaning up [1]" << rsLog;
{
Client::WriteContext cx( "local." );
cx.ctx().db()->flushFiles(true);
}
log() << "replSet cleaning up [2]" << rsLog;
log() << "replSet initial sync failed will try again" << endl;
sleepsecs(5);
return false;
}
}
return true;
}
/**
* Do the initial sync for this member. There are several steps to this process:
*
* 0. Add _initialSyncFlag to minValid to tell us to restart initial sync if we
* crash in the middle of this procedure
* 1. Record start time.
* 2. Clone.
* 3. Set minValid1 to sync target's latest op time.
* 4. Apply ops from start to minValid1, fetching missing docs as needed.
* 5. Set minValid2 to sync target's latest op time.
* 6. Apply ops from minValid1 to minValid2.
* 7. Build indexes.
* 8. Set minValid3 to sync target's latest op time.
* 9. Apply ops from minValid2 to minValid3.
10. Clean up minValid and remove _initialSyncFlag field
*
* At that point, initial sync is finished. Note that the oplog from the sync target is applied
* three times: step 4, 6, and 8. 4 may involve refetching, 6 should not. By the end of 6,
* this member should have consistent data. 8 is "cosmetic," it is only to get this member
* closer to the latest op time before it can transition to secondary state.
*/
void ReplSetImpl::_syncDoInitialSync() {
replset::InitialSync init(replset::BackgroundSync::get());
replset::SyncTail tail(replset::BackgroundSync::get());
sethbmsg("initial sync pending",0);
// if this is the first node, it may have already become primary
if ( box.getState().primary() ) {
sethbmsg("I'm already primary, no need for initial sync",0);
return;
}
const Member *source = getMemberToSyncTo();
if (!source) {
sethbmsg("initial sync need a member to be primary or secondary to do our initial sync", 0);
sleepsecs(15);
return;
}
string sourceHostname = source->h().toString();
init.setHostname(sourceHostname);
OplogReader r;
if( !r.connect(sourceHostname) ) {
sethbmsg( str::stream() << "initial sync couldn't connect to " << source->h().toString() , 0);
sleepsecs(15);
return;
}
BSONObj lastOp = r.getLastOp(rsoplog);
if( lastOp.isEmpty() ) {
sethbmsg("initial sync couldn't read remote oplog", 0);
sleepsecs(15);
return;
}
// written by applyToHead calls
BSONObj minValid;
if (replSettings.fastsync) {
log() << "fastsync: skipping database clone" << rsLog;
// prime oplog
init.oplogApplication(lastOp, lastOp);
return;
}
else {
// Add field to minvalid document to tell us to restart initial sync if we crash
theReplSet->setInitialSyncFlag();
sethbmsg("initial sync drop all databases", 0);
dropAllDatabasesExceptLocal();
sethbmsg("initial sync clone all databases", 0);
list<string> dbs = r.conn()->getDatabaseNames();
Cloner cloner;
if (!_syncDoInitialSync_clone(cloner, sourceHostname.c_str(), dbs, true)) {
veto(source->fullName(), 600);
sleepsecs(300);
return;
}
sethbmsg("initial sync data copy, starting syncup",0);
log() << "oplog sync 1 of 3" << endl;
if ( ! _syncDoInitialSync_applyToHead( init, &r , source , lastOp , minValid ) ) {
return;
}
lastOp = minValid;
// Now we sync to the latest op on the sync target _again_, as we may have recloned ops
// that were "from the future" compared with minValid. During this second application,
// nothing should need to be recloned.
log() << "oplog sync 2 of 3" << endl;
if (!_syncDoInitialSync_applyToHead(tail, &r , source , lastOp , minValid)) {
return;
}
// data should now be consistent
lastOp = minValid;
sethbmsg("initial sync building indexes",0);
if (!_syncDoInitialSync_clone(cloner, sourceHostname.c_str(), dbs, false)) {
veto(source->fullName(), 600);
sleepsecs(300);
return;
}
}
log() << "oplog sync 3 of 3" << endl;
if (!_syncDoInitialSync_applyToHead(tail, &r, source, lastOp, minValid)) {
return;
}
// ---------
Status status = getGlobalAuthorizationManager()->initialize();
if (!status.isOK()) {
warning() << "Failed to reinitialize auth data after initial sync. " << status;
return;
}
sethbmsg("initial sync finishing up",0);
verify( !box.getState().primary() ); // wouldn't make sense if we were.
{
Client::WriteContext cx( "local." );
cx.ctx().db()->flushFiles(true);
try {
log() << "replSet set minValid=" << minValid["ts"]._opTime().toString() << rsLog;
}
catch(...) { }
// Initial sync is now complete. Flag this by setting minValid to the last thing
// we synced.
theReplSet->setMinValid(minValid);
// Clear the initial sync flag.
theReplSet->clearInitialSyncFlag();
cx.ctx().db()->flushFiles(true);
}
{
boost::unique_lock<boost::mutex> lock(theReplSet->initialSyncMutex);
theReplSet->initialSyncRequested = false;
}
// If we just cloned & there were no ops applied, we still want the primary to know where
// we're up to
replset::BackgroundSync::notify();
changeState(MemberState::RS_RECOVERING);
sethbmsg("initial sync done",0);
}
}
1013
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
