OpenLDAP Installation&Configuration Guide

2019独角兽企业重金招聘Python工程师标准>>>

OpenLDAP Installation&Configuration Guide

Install the openldap

# yum -y install openldap.x86_64 openldap-clients.x86_64 openldap-devel.x86_64 openldap-servers.x86_64

 

Configure the openldap

Generate the olcRootPW:

# slappasswd

New password: qazwsx

Re-enter new password: qazwsx

{SSHA}nnrYPYMtry/sPDUilclaQOp2u4/m5xZL

 

Modify the olcDatabase={2}bdb.ldif

Modify the olcDatabase={2}bdb.ldif file, and change the olcRootDN and olcSuffix entries. The following is the default entry.

# grep olcRootDN /etc/openldap/slapd.d/cn=config/olcDatabase=\{2\}bdb.ldif

olcRootDN: cn=Manager,dc=my-domain,dc=com

 

#  grep olcSuffix  /etc/openldap/slapd.d/cn\=config/olcDatabase\=\{2\}bdb.ldif

olcSuffix: dc=my-domain,dc=com

Change the above line to your domain component. For example, eddie.

olcRootDN: cn=Manager,dc=eddie,dc=com

 

 

Appending these two lines into the olcDatabase\=\{2\}bdb.ldif file enables that the user can change their password, and should be authenticated.

olcAccess: {0}to attrs=userPassword by self write by dn.base="cn=Manager,dc=eddie,dc=com" write by anonymous auth by * none

olcAccess: {1}to * by dn.base="cn=Manager,dc=eddie,dc=com" write by self write by * read

 

 

 

Modify the olcDatabase={1}monitor.ldif

Modify the olcDatabase\=\{1\}monitor.ldif , change the dn.base to your right one, for example, cn=Manager,dc=eddie,dc=com

 

 Verify the configuration files

Execute the command to verify the configuration:

[root@OLInfa ~]# slaptest -u

559a89a8 ldif_read_file: checksum error on "/etc/openldap/slapd.d/cn=config/olcDatabase={1}monitor.ldif"

559a89a8 ldif_read_file: checksum error on "/etc/openldap/slapd.d/cn=config/olcDatabase={2}bdb.ldif"

config file testing succeeded

 

Please ignore the checksum error.

 

 Start the openldap service

Start the openldap automatically when the OS starts[level 2,3,4,5].

# chkconfig slapd on

 

Start the openldap service now.

# service slapd start

 

Configure the initial ldif file

Create an initial ldif file: eddie.ldif

[root@OLInfa ~]# cat eddie.ldif

dn: dc=eddie,dc=com

objectClass: dcObject

objectClass: organization

dc: eddie

o: eddie

 

Import the initial ldif file

ldapadd -x -W -D "cn=Manager,dc=eddie,dc=com" -f eddie.ldif

Enter LDAP Password:

adding new entry "dc=eddie,dc=com"

 

Verify the base structure

# ldapsearch -x -W -D "cn=Manager,dc=eddie,dc=com" -b "dc=eddie,dc=com" "(objectclass=*)"

Enter LDAP Password:

# extended LDIF

#

# LDAPv3

# base <dc=eddie,dc=com> with scope subtree

# filter: (objectclass=*)

# requesting: ALL

#

 

# eddie.com

dn: dc=eddie,dc=com

objectClass: dcObject

objectClass: organization

dc: eddie

o: eddie

……

 

 Now you can use other ldap clients to manage it.

转载于:https://my.oschina.net/swuly302/blog/475036