一、搭建环境：

准备三台虚拟机，分别命名为dhcp,dhcprelay(添加三块网卡),client ，Dhcp 连接 vmnet1，

dhcprelay 分别连接 vmnet1，vmnet2，vmnet3.

为三台虚拟机配置IP地址

dhcp-eth0:

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0 

DEVICE=eth0
ONBOOT=yes
IPADDR=50.1.1.1
NETMASK=255.255.255.0
GATEWAY=50.1.1.254

[root@localhost ~]# ifdown eth0 ; ifup eth0

dhcprelay-eth0：

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth
ifcfg-eth0      ifcfg-eth0.bak  ifcfg-eth1      ifcfg-eth2

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0
ONBOOT=yes
TYPE=Ethernet
IPADDR=50.1.1.254
NETMASK=255.255.255.0

[root@localhost ~]# ifdown eth0 ; ifup eth0


dhcprelay-eth1：

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth1

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth1
BOOTPROTO=static
ONBOOT=yes
IPADDR=50.2.2.254
NETMASK=255.255.255.0

[root@localhost ~]# ifdown eth1 ; ifup eth1


dhcprelay-eth2：

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth2

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth2
BOOTPROTO=static
ONBOOT=yes
IPADDR=50.3.3.254
NETMASK=255.255.255.0

[root@localhost ~]# ifdown eth2 ; ifup eth2

二、在dhcp 和 dhcprelay 上安装dhcp服务

[root@localhost ~]# mount -o loop /dev/cdrom /media/
[root@localhost ~]# cd /media/Server/
[root@localhost Server]# rpm -ivh dhcp-3.0.5-23.el5.i386.rpm 
error: failed to stat /media/RHEL_5.5 i386 DVD: 没有那个文件或目录
Preparing...                ########################################### [100%]
   1:dhcp                   ########################################### [100%]

三、在dhcp上编辑/etc/dhcpd.conf

[root@localhost Server]# cp /usr/share/doc/dhcp-3.0.5/dhcpd.conf.sample /etc/dhcpd.conf 
cp：是否覆盖“/etc/dhcpd.conf”? y
[root@localhost Server]# vim /etc/dhcpd.conf 

ddns-update-style none;
default-lease-time 21600;
max-lease-time 43200;
option domain-name-servers 202.106.0.20;
subnet  50.1.1.0  netmask 255.255.255.0 {
        option routers                  50.1.1.254;
        option subnet-mask              255.255.255.0;
        range dynamic-bootp 50.1.1.2 50.1.1.100;
        host srv {
                hardware ethernet 12:34:56:78:AB:CD;
                fixed-address 50.1.1.50;
        }
}
subnet 50.2.2.0 netmask 255.255.255.0{
        range dynamic-bootp 50.2.2.2 50.2.2.100;
        option subnet-mask 255.255.255.0;
        option routers 50.2.2.254;
}
subnet 50.3.3.0 netmask 255.255.255.0{
        range dynamic-bootp 50.3.3.2 50.3.3.100;
        option subnet-mask 255.255.255.0;
        option routers 50.3.3.254;
}

四、在dhcp上启动dhcp 服务

[root@localhost ~]# service dhcpd start
启动 dhcpd：                                               [确定]

五、在dhcprelay 上开启路由转发

[root@localhost Server]# vim /etc/sysctl.conf 

net.ipv4.ip_forward = 1

[root@localhost Server]# sysctl -p
net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
net.ipv4.tcp_syncookies = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 4294967295
kernel.shmall = 268435456

六、在dhcprelay 上配置中继

[root@localhost Server]# vim /etc/sysconfig/dhcrelay 

# Command line options here
INTERFACES="eth0 eth1 eth2"
DHCPSERVERS="50.1.1.1"

七、启动dhcprelay 中继服务

[root@localhost Server]# service dhcrelay start
启动 dhcrelay：                                            [确定]

八、验证

1、将client 连接vmnet1上，并设置dhcp自动获取

DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes

2、重启网卡后查看IP

[root@localhost ~]# ifdown eth0
[root@localhost ~]# ifup eth0

正在决定 eth0 的 IP 信息...完成。
[root@localhost ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:B1:17:07  
          inet addr:50.1.1.100  Bcast:50.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:feb1:1707/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:221 errors:0 dropped:0 overruns:0 frame:0
          TX packets:659 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:43662 (42.6 KiB)  TX bytes:133870 (130.7 KiB)
          Interrupt:177 Base address:0x2024 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3162 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3162 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5332786 (5.0 MiB)  TX bytes:5332786 (5.0 MiB)
3、修改网卡使用的MAC地址为 cc-cc-cc-cc-cc-cc 获得ip 地址为保留ip 50.1.1.50

[root@localhost ~]# ifdown eth0
[root@localhost ~]# ifconfig eth0 hw ether cc:cc:cc:cc:cc:cc
[root@localhost ~]# ifup eth0

正在决定 eth0 的 IP 信息...完成。
[root@localhost ~]# ifconfig 
eth0      Link encap:Ethernet  HWaddr CC:CC:CC:CC:CC:CC  
          inet addr:50.1.1.50  Bcast:50.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::cecc:ccff:fecc:cccc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:227 errors:0 dropped:0 overruns:0 frame:0
          TX packets:693 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:45714 (44.6 KiB)  TX bytes:141004 (137.6 KiB)
          Interrupt:177 Base address:0x2024 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3162 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3162 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5332786 (5.0 MiB)  TX bytes:5332786 (5.0 MiB)

4、将client 连接 vmnet2上，并设置重启网卡获得50.2.2.100

[root@localhost ~]# ifdown eth0 ; ifup eth0

正在决定 eth0 的 IP 信息...完成。

[root@localhost ~]# ifconfig 
eth0      Link encap:Ethernet  HWaddr CC:CC:CC:CC:CC:CC  
          inet addr:50.2.2.100  Bcast:50.2.2.255  Mask:255.255.255.0
          inet6 addr: fe80::cecc:ccff:fecc:cccc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:241 errors:0 dropped:0 overruns:0 frame:0
          TX packets:742 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:49190 (48.0 KiB)  TX bytes:150619 (147.0 KiB)
          Interrupt:177 Base address:0x2024 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3162 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3162 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5332786 (5.0 MiB)  TX bytes:5332786 (5.0 MiB)

5、将client连接vmnet3上，并设置重启网卡获得50.3.3.100

[root@localhost ~]# ifdown eth0 ; ifup eth0

正在决定 eth0 的 IP 信息...完成。
[root@localhost ~]# ifconfig 
eth0      Link encap:Ethernet  HWaddr CC:CC:CC:CC:CC:CC  
          inet addr:50.3.3.100  Bcast:50.3.3.255  Mask:255.255.255.0
          inet6 addr: fe80::cecc:ccff:fecc:cccc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:247 errors:0 dropped:0 overruns:0 frame:0
          TX packets:791 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:50116 (48.9 KiB)  TX bytes:161057 (157.2 KiB)
          Interrupt:177 Base address:0x2024 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3162 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3162 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5332786 (5.0 MiB)  TX bytes:5332786 (5.0 MiB)