讨论QQ：1586558083
正文
一、启动脚本分析
独立部署模式下，主要由master和slaves组成，master可以利用zk实现高可用性，其driver，work，app等信息可以持久化到zk上；slaves由一台至多台主机构成。Driver通过向Master申请资源获取运行环境。
启动master和slaves主要是执行/usr/dahua/spark/sbin目录下的start-master.sh和start-slaves.sh，或者执行
start-all.sh，其中star-all.sh本质上就是调用start-master.sh和start-slaves.sh
1.1 start-all.sh
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
#2.执行${SPARK_HOME}/sbin/spark-config.sh，见以下分析 . "${SPARK_HOME}/sbin/spark-config.sh" #3.执行"${SPARK_HOME}/sbin"/start-master.sh，见以下分析 "${SPARK_HOME}/sbin"/start-master.sh #4.执行"${SPARK_HOME}/sbin"/start-slaves.sh，见以下分析 "${SPARK_HOME}/sbin"/start-slaves.sh
其中start-master.sh和start-slave.sh分别调用的是
org.apache.spark.deploy.master.Master和org.apache.spark.deploy.worker.Worker
1.2 start-master.sh
start-master.sh调用了spark-daemon.sh，注意这里指定了启动的类
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
# NOTE: This exact class name is matched downstream by SparkSubmit. # Any changes need to be reflected there. #2.设置CLASS="org.apache.spark.deploy.master.Master" CLASS="org.apache.spark.deploy.master.Master" #3.如果参数结尾包含--help或者-h则打印帮助信息，并退出 if [[ "$@" = *--help ]] || [[ "$@" = *-h ]]; then echo "Usage: ./sbin/start-master.sh [options]" pattern="Usage:" pattern+="\|Using Spark's default log4j profile:" pattern+="\|Registered signal handlers for" "${SPARK_HOME}"/bin/spark-class $CLASS --help 2>&1 | grep -v "$pattern" 1>&2 exit 1 fi #4.设置ORIGINAL_ARGS为所有参数 ORIGINAL_ARGS="$@" #5.执行${SPARK_HOME}/sbin/spark-config.sh . "${SPARK_HOME}/sbin/spark-config.sh" #6.执行${SPARK_HOME}/bin/load-spark-env.sh . "${SPARK_HOME}/bin/load-spark-env.sh" #7.SPARK_MASTER_PORT为空则赋值7077 if [ "$SPARK_MASTER_PORT" = "" ]; then SPARK_MASTER_PORT=7077 fi #8.SPARK_MASTER_HOST为空则赋值本主机名(hostname) if [ "$SPARK_MASTER_HOST" = "" ]; then case `uname` in (SunOS) SPARK_MASTER_HOST="`/usr/sbin/check-hostname | awk '{print $NF}'`" ;; (*) SPARK_MASTER_HOST="`hostname -f`" ;; esac fi #9.SPARK_MASTER_WEBUI_PORT为空则赋值8080 if [ "$SPARK_MASTER_WEBUI_PORT" = "" ]; then SPARK_MASTER_WEBUI_PORT=8080 fi #10.执行脚本 "${SPARK_HOME}/sbin"/spark-daemon.sh start $CLASS 1 \ --host $SPARK_MASTER_HOST --port $SPARK_MASTER_PORT --webui-port $SPARK_MASTER_WEBUI_PORT \ $ORIGINAL_ARGS
其中10肯定是重点，分析之前我们看看5，6都干了些啥，最后直译出最后一个脚本
1.3 spark-config.sh(1.2的第5步)
#判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
#SPARK_CONF_DIR存在就用此目录，不存在用${SPARK_HOME}/conf export SPARK_CONF_DIR="${SPARK_CONF_DIR:-"${SPARK_HOME}/conf"}" # Add the PySpark classes to the PYTHONPATH: if [ -z "${PYSPARK_PYTHONPATH_SET}" ]; then export PYTHONPATH="${SPARK_HOME}/python:${PYTHONPATH}" export PYTHONPATH="${SPARK_HOME}/python/lib/py4j-0.10.6-src.zip:${PYTHONPATH}" export PYSPARK_PYTHONPATH_SET=1 fi
1.4 load-spark-env.sh(1.2的第6步)
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
source "$(dirname "$0")"/find-spark-home
fi
#2.判断SPARK_ENV_LOADED是否有值，没有将其设置为1 if [ -z "$SPARK_ENV_LOADED" ]; then export SPARK_ENV_LOADED=1 #3.设置user_conf_dir为SPARK_CONF_DIR或SPARK_HOME/conf export SPARK_CONF_DIR="${SPARK_CONF_DIR:-"${SPARK_HOME}"/conf}" #4.执行"${user_conf_dir}/spark-env.sh" [注：set -/+a含义再做研究] if [ -f "${SPARK_CONF_DIR}/spark-env.sh" ]; then # Promote all variable declarations to environment (exported) variables set -a . "${SPARK_CONF_DIR}/spark-env.sh" set +a fi fi # Setting SPARK_SCALA_VERSION if not already set. #5.选择scala版本，2.11和2.12都存在的情况下，优先选择2.11 if [ -z "$SPARK_SCALA_VERSION" ]; then ASSEMBLY_DIR2="${SPARK_HOME}/assembly/target/scala-2.11" ASSEMBLY_DIR1="${SPARK_HOME}/assembly/target/scala-2.12" if [[ -d "$ASSEMBLY_DIR2" && -d "$ASSEMBLY_DIR1" ]]; then echo -e "Presence of build for multiple Scala versions detected." 1>&2 echo -e 'Either clean one of them or, export SPARK_SCALA_VERSION in spark-env.sh.' 1>&2 exit 1 fi if [ -d "$ASSEMBLY_DIR2" ]; then export SPARK_SCALA_VERSION="2.11" else export SPARK_SCALA_VERSION="2.12" fi fi
1.5 spark-env.sh
列举很多种模式的选项配置
1.6 spark-daemon.sh
回过头来看看1.2第10步中需要直译出的最后一个脚本,如下：
sbin/spark-daemon.sh start org.apache.spark.deploy.master.Master 1 --host hostname --port 7077 --webui-port 8080
上面搞了半天只是设置了变量，最终才进入主角，继续分析spark-daemon.sh脚本
#1.参数个数小于等于1，打印帮助
if [ $# -le 1 ]; then
echo $usage
exit 1
fi
#2.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录 if [ -z "${SPARK_HOME}" ]; then export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)" fi #3.执行${SPARK_HOME}/sbin/spark-config.sh，见上述分析 [类似脚本是否有重复？原因是有的人是直接用spark-daemon.sh启动的服务，反正重复设置下变量不需要什么代价] . "${SPARK_HOME}/sbin/spark-config.sh" # get arguments # Check if --config is passed as an argument. It is an optional parameter. # Exit if the argument is not a directory. #4.判断第一个参数是否是--config,如果是取空格后一个字符串，然后判断该目录是否存在，不存在则打印错误信息并退出，存在设置SPARK_CONF_DIR为该目录,shift到下一个参数 #[注：--config只能用在第一参数上] if [ "$1" == "--config" ] then shift conf_dir="$1" if [ ! -d "$conf_dir" ] then echo "ERROR : $conf_dir is not a directory" echo $usage exit 1 else export SPARK_CONF_DIR="$conf_dir" fi shift fi #5.分别设置option、command、instance为后面的三个参数(如：option=start,command=org.apache.spark.deploy.master.Master,instance=1) #[注：很多人用spark-daemon.sh启动服务不成功的原因是名字不全] option=$1 shift command=$1 shift instance=$1 shift #6.日志回滚函数，主要用于更改日志名，如log-->log.1等，略过 spark_rotate_log () { log=$1; num=5; if [ -n "$2" ]; then num=$2 fi if [ -f "$log" ]; then # rotate logs while [ $num -gt 1 ]; do prev=`expr $num - 1` [ -f "$log.$prev" ] && mv "$log.$prev" "$log.$num" num=$prev done mv "$log" "$log.$num"; fi } #7.执行${SPARK_HOME}/bin/load-spark-env.sh，见上述分析 . "${SPARK_HOME}/bin/load-spark-env.sh" #8.判断SPARK_IDENT_STRING是否有值，没有将其设置为$USER(linux用户) if [ "$SPARK_IDENT_STRING" = "" ]; then export SPARK_IDENT_STRING="$USER" fi #9.设置SPARK_PRINT_LAUNCH_COMMAND=1 export SPARK_PRINT_LAUNCH_COMMAND="1" # get log directory #10.判断SPARK_LOG_DIR是否有值，没有将其设置为${SPARK_HOME}/logs，并创建改目录，测试创建文件，修改权限 if [ "$SPARK_LOG_DIR" = "" ]; then export SPARK_LOG_DIR="${SPARK_HOME}/logs" fi mkdir -p "$SPARK_LOG_DIR" touch "$SPARK_LOG_DIR"/.spark_test > /dev/null 2>&1 TEST_LOG_DIR=$? if [ "${TEST_LOG_DIR}" = "0" ]; then rm -f "$SPARK_LOG_DIR"/.spark_test else chown "$SPARK_IDENT_STRING" "$SPARK_LOG_DIR" fi #11.判断SPARK_PID_DIR是否有值，没有将其设置为/tmp if [ "$SPARK_PID_DIR" = "" ]; then SPARK_PID_DIR=/tmp fi # some variables #12.设置log和pid log="$SPARK_LOG_DIR/spark-$SPARK_IDENT_STRING-$command-$instance-$HOSTNAME.out" pid="$SPARK_PID_DIR/spark-$SPARK_IDENT_STRING-$command-$instance.pid" # Set default scheduling priority #13.判断SPARK_NICENESS是否有值，没有将其设置为0 [注：调度优先级，见后面] if [ "$SPARK_NICENESS" = "" ]; then export SPARK_NICENESS=0 fi #14.execute_command()函数，暂且略过，调用时再作分析 execute_command() { if [ -z ${SPARK_NO_DAEMONIZE+set} ]; then nohup -- "$@" >> $log 2>&1 < /dev/null & newpid="$!" echo "$newpid" > "$pid" # Poll for up to 5 seconds for the java process to start for i in {1..10} do if [[ $(ps -p "$newpid" -o comm=) =~ "java" ]]; then break fi sleep 0.5 done sleep 2 # Check if the process has died; in that case we'll tail the log so the user can see if [[ ! $(ps -p "$newpid" -o comm=) =~ "java" ]]; then echo "failed to launch: $@" tail -10 "$log" | sed 's/^/ /' echo "full log in $log" fi else "$@" fi } #15.进入case语句，判断option值，进入该分支，我们以start为例 # 执行run_command class "$@"，其中$@此时为空，经验证，启动带上此参数后，关闭也需，不然关闭不了，后面再分析此参数作用 # 我们正式进入run_command()函数，分析 # I.设置mode=class,创建SPARK_PID_DIR，上面的pid文件是否存在， # II.SPARK_MASTER不为空，同步删除某些文件 # III.回滚log日志 # IV.进入case，command=org.apache.spark.deploy.master.Master，最终执行 # nohup nice -n "$SPARK_NICENESS" "${SPARK_HOME}"/bin/spark-class $command "$@" >> "$log" 2>&1 < /dev/null & # newpid="$!" # echo "$newpid" > "$pid" # 重点转向bin/spark-class org.apache.spark.deploy.master.Master run_command() { mode="$1" shift mkdir -p "$SPARK_PID_DIR" if [ -f "$pid" ]; then TARGET_ID="$(cat "$pid")" if [[ $(ps -p "$TARGET_ID" -o comm=) =~ "java" ]]; then echo "$command running as process $TARGET_ID. Stop it first." exit 1 fi fi if [ "$SPARK_MASTER" != "" ]; then echo rsync from "$SPARK_MASTER" rsync -a -e ssh --delete --exclude=.svn --exclude='logs/*' --exclude='contrib/hod/logs/*' "$SPARK_MASTER/" "${SPARK_HOME}" fi spark_rotate_log "$log" echo "starting $command, logging to $log" case "$mode" in (class) execute_command nice -n "$SPARK_NICENESS" "${SPARK_HOME}"/bin/spark-class "$command" "$@" ;; (submit) execute_command nice -n "$SPARK_NICENESS" bash "${SPARK_HOME}"/bin/spark-submit --class "$command" "$@" ;; (*) echo "unknown mode: $mode" exit 1 ;; esac } case $option in (submit) run_command submit "$@" ;; (start) run_command class "$@" ;; (stop) if [ -f $pid ]; then TARGET_ID="$(cat "$pid")" if [[ $(ps -p "$TARGET_ID" -o comm=) =~ "java" ]]; then echo "stopping $command" kill "$TARGET_ID" && rm -f "$pid" else echo "no $command to stop" fi else echo "no $command to stop" fi ;; (status) if [ -f $pid ]; then TARGET_ID="$(cat "$pid")" if [[ $(ps -p "$TARGET_ID" -o comm=) =~ "java" ]]; then echo $command is running. exit 0 else echo $pid file is present but $command not running exit 1 fi else echo $command not running. exit 2 fi ;; (*) echo $usage exit 1 ;; esac
1.7 spark-class
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
source "$(dirname "$0")"/find-spark-home
fi
#2.执行${SPARK_HOME}/bin/load-spark-env.sh，见上述分析 . "${SPARK_HOME}"/bin/load-spark-env.sh # Find the java binary #3.判断JAVA_HOME是否为NULL，不是则设置RUNNER="${JAVA_HOME}/bin/java"，否则找系统自带，在没有则报未设置，并退出 if [ -n "${JAVA_HOME}" ]; then RUNNER="${JAVA_HOME}/bin/java" else if [ "$(command -v java)" ]; then RUNNER="java" else echo "JAVA_HOME is not set" >&2 exit 1 fi fi # Find Spark jars. #4.查找SPARK_JARS_DIR，若${SPARK_HOME}/RELEASE文件存在，则SPARK_JARS_DIR="${SPARK_HOME}/jars"，否则 #SPARK_JARS_DIR="${SPARK_HOME}/assembly/target/scala-$SPARK_SCALA_VERSION/jars" if [ -d "${SPARK_HOME}/jars" ]; then SPARK_JARS_DIR="${SPARK_HOME}/jars" else SPARK_JARS_DIR="${SPARK_HOME}/assembly/target/scala-$SPARK_SCALA_VERSION/jars" fi #5.若SPARK_JARS_DIR不存在且$SPARK_TESTING$SPARK_SQL_TESTING有值[注：一般我们不设置这两变量]，报错退出，否则LAUNCH_CLASSPATH="$SPARK_JARS_DIR/*" if [ ! -d "$SPARK_JARS_DIR" ] && [ -z "$SPARK_TESTING$SPARK_SQL_TESTING" ]; then echo "Failed to find Spark jars directory ($SPARK_JARS_DIR)." 1>&2 echo "You need to build Spark with the target \"package\" before running this program." 1>&2 exit 1 else LAUNCH_CLASSPATH="$SPARK_JARS_DIR/*" fi # Add the launcher build dir to the classpath if requested. #6.SPARK_PREPEND_CLASSES不是NULL，则LAUNCH_CLASSPATH="${SPARK_HOME}/launcher/target/scala-$SPARK_SCALA_VERSION/classes:$LAUNCH_CLASSPATH"， #添加编译相关至LAUNCH_CLASSPATH if [ -n "$SPARK_PREPEND_CLASSES" ]; then LAUNCH_CLASSPATH="${SPARK_HOME}/launcher/target/scala-$SPARK_SCALA_VERSION/classes:$LAUNCH_CLASSPATH" fi # For tests #7.SPARK_TESTING不是NULL，则unset YARN_CONF_DIR和unset HADOOP_CONF_DIR，暂且当做是为了某种测试 if [[ -n "$SPARK_TESTING" ]]; then unset YARN_CONF_DIR unset HADOOP_CONF_DIR fi #8.build_command函数，略过 build_command() { "$RUNNER" -Xmx128m -cp "$LAUNCH_CLASSPATH" org.apache.spark.launcher.Main "$@" printf "%d\0" $? } # Turn off posix mode since it does not allow process substitution set +o posix CMD=() while IFS= read -d '' -r ARG; do CMD+=("$ARG") #9.最终调用"$RUNNER" -Xmx128m -cp "$LAUNCH_CLASSPATH" org.apache.spark.launcher.Main "$@"， #直译：java -Xmx128m -cp "$LAUNCH_CLASSPATH" org.apache.spark.launcher.Main "$@" #转向java类org.apache.spark.launcher.Main，这就是java入口类 done < <(build_command "$@") COUNT=${#CMD[@]} LAST=$((COUNT - 1)) LAUNCHER_EXIT_CODE=${CMD[$LAST]} # Certain JVM failures result in errors being printed to stdout (instead of stderr), which causes # the code that parses the output of the launcher to get confused. In those cases, check if the # exit code is an integer, and if it's not, handle it as a special error case. if ! [[ $LAUNCHER_EXIT_CODE =~ ^[0-9]+$ ]]; then echo "${CMD[@]}" | head -n-1 1>&2 exit 1 fi if [ $LAUNCHER_EXIT_CODE != 0 ]; then exit $LAUNCHER_EXIT_CODE fi CMD=("${CMD[@]:0:$LAST}") exec "${CMD[@]}"
1.8 start-slaves.sh
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
#2.执行${SPARK_HOME}/sbin/spark-config.sh，见上述分析 . "${SPARK_HOME}/sbin/spark-config.sh" #3.执行${SPARK_HOME}/bin/load-spark-env.sh，见上述分析 . "${SPARK_HOME}/bin/load-spark-env.sh" # Find the port number for the master #4.SPARK_MASTER_PORT为空则设置为7077 if [ "$SPARK_MASTER_PORT" = "" ]; then SPARK_MASTER_PORT=7077 fi #5.SPARK_MASTER_HOST为空则设置为`hostname` if [ "$SPARK_MASTER_HOST" = "" ]; then case `uname` in (SunOS) SPARK_MASTER_HOST="`/usr/sbin/check-hostname | awk '{print $NF}'`" ;; (*) SPARK_MASTER_HOST="`hostname -f`" ;; esac fi # Launch the slaves #6.启动slaves， # "${SPARK_HOME}/sbin/slaves.sh" cd "${SPARK_HOME}" \; "${SPARK_HOME}/sbin/start-slave.sh" "spark://$SPARK_MASTER_HOST:$SPARK_MASTER_PORT" # 遍历conf/slaves中主机，其中有设置SPARK_SSH_OPTS，ssh每一台机器执行"${SPARK_HOME}/sbin/start-slave.sh" "spark://$SPARK_MASTER_HOST:$SPARK_MASTER_PORT" "${SPARK_HOME}/sbin/slaves.sh" cd "${SPARK_HOME}" \; "${SPARK_HOME}/sbin/start-slave.sh" "spark://$SPARK_MASTER_HOST:$SPARK_MASTER_PORT"
1.9 转向start-slave.sh
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
#2.设置CLASS="org.apache.spark.deploy.worker.Worker" CLASS="org.apache.spark.deploy.worker.Worker" #3.如果参数结尾包含--help或者-h则打印帮助信息，并退出 if [[ $# -lt 1 ]] || [[ "$@" = *--help ]] || [[ "$@" = *-h ]]; then echo "Usage: ./sbin/start-slave.sh [options] <master>" pattern="Usage:" pattern+="\|Using Spark's default log4j profile:" pattern+="\|Registered signal handlers for" "${SPARK_HOME}"/bin/spark-class $CLASS --help 2>&1 | grep -v "$pattern" 1>&2 exit 1 fi #4.执行${SPARK_HOME}/sbin/spark-config.sh，见上述分析 . "${SPARK_HOME}/sbin/spark-config.sh" #5.执行${SPARK_HOME}/bin/load-spark-env.sh，见上述分析 . "${SPARK_HOME}/bin/load-spark-env.sh" #6.MASTER=$1,这里MASTER=spark://hostname:7077，然后shift，也就是说单独启动单个slave使用start-slave.sh spark://hostname:7077 MASTER=$1 shift #7.SPARK_WORKER_WEBUI_PORT为空则设置为8081 if [ "$SPARK_WORKER_WEBUI_PORT" = "" ]; then SPARK_WORKER_WEBUI_PORT=8081 fi #8.函数start_instance，略过 function start_instance { #设置WORKER_NUM=$1 WORKER_NUM=$1 shift if [ "$SPARK_WORKER_PORT" = "" ]; then PORT_FLAG= PORT_NUM= else PORT_FLAG="--port" PORT_NUM=$(( $SPARK_WORKER_PORT + $WORKER_NUM - 1 )) fi WEBUI_PORT=$(( $SPARK_WORKER_WEBUI_PORT + $WORKER_NUM - 1 )) #直译：spark-daemon.sh start org.apache.spark.deploy.worker.Worker 1 --webui-port 7077 spark://hostname:7077 #代码再次转向spark-daemon.sh，见上诉分析 "${SPARK_HOME}/sbin"/spark-daemon.sh start $CLASS $WORKER_NUM \ --webui-port "$WEBUI_PORT" $PORT_FLAG $PORT_NUM $MASTER "$@" } #9.判断SPARK_WORKER_INSTANCES(可以认为是单节点Worker进程数)是否为空 # 为空，则start_instance 1 "$@" # 不为空，则循环 # for ((i=0; i<$SPARK_WORKER_INSTANCES; i++)); do # start_instance $(( 1 + $i )) "$@" # done if [ "$SPARK_WORKER_INSTANCES" = "" ]; then start_instance 1 "$@" else for ((i=0; i<$SPARK_WORKER_INSTANCES; i++)); do #10.转向start_instance函数 start_instance $(( 1 + $i )) "$@" done fi
二、其他脚本
2.1 start-history-server.sh
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
#2.执行${SPARK_HOME}/sbin/spark-config.sh，见上述分析 . "${SPARK_HOME}/sbin/spark-config.sh" #3.执行${SPARK_HOME}/bin/load-spark-env.sh，见上述分析 . "${SPARK_HOME}/bin/load-spark-env.sh" #4.exec "${SPARK_HOME}/sbin"/spark-daemon.sh start org.apache.spark.deploy.history.HistoryServer 1 $@ ，见上诉分析 exec "${SPARK_HOME}/sbin"/spark-daemon.sh start org.apache.spark.deploy.history.HistoryServer 1 "$@"
2.2 start-shuffle-service.sh
#1.判断SPARK_HOME是否有值，没有将其设置为当前文件所在目录的上级目录
if [ -z "${SPARK_HOME}" ]; then
export SPARK_HOME="$(cd "`dirname "$0"`"/..; pwd)"
fi
#2.执行${SPARK_HOME}/sbin/spark-config.sh，见上述分析 . "${SPARK_HOME}/sbin/spark-config.sh" #3.执行${SPARK_HOME}/bin/load-spark-env.sh，见上述分析 . "${SPARK_HOME}/bin/load-spark-env.sh" #4.exec "${SPARK_HOME}/sbin"/spark-daemon.sh start org.apache.spark.deploy.ExternalShuffleService 1 ，见上诉分析 exec "${SPARK_HOME}/sbin"/spark-daemon.sh start org.apache.spark.deploy.ExternalShuffleService 1
2.3 start-thriftserver.sh
开启thriftserver，略
扫一扫
461
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
