配置完个路由器之间要连通性

R2：
R2(config)#line vty 0 4
R2(config-line)#pass
R2(config-line)#password ccna
R2(config-line)#login
R2(config-line)#exi

R1#telnet 192.168.12.2
Trying 192.168.12.2 ... Open

 


User Access Verification

Password:      (ccna)
R2>en
Password:
R2#sh user
    Line       User       Host(s)              Idle       Location
   0 con 0                idle                 00:00:46  
*130 vty 0                idle                 00:00:00 192.168.12.1

  Interface    User               Mode         Idle     Peer Address

R2#            (ctrl+shift+6 x   挂起)
R1#sh sessions
Conn Host                Address             Byte  Idle Conn Name
*  1 192.168.12.2        192.168.12.2           0     0 192.168.12.2
R1#1
[Resuming connection 1 to 192.168.12.2 ... ]
 
R2#sh users
    Line       User       Host(s)              Idle       Location
   0 con 0                idle                 00:00:15  
*130 vty 0                idle                 00:00:00 192.168.12.1

  Interface    User               Mode         Idle     Peer Address

R1#sh sess
Conn Host                Address             Byte  Idle Conn Name
*  1 192.168.12.2        192.168.12.2           0     0 192.168.12.2

R1#disconnect 1
Closing connection to 192.168.12.2 [confirm]


R2#sh user
    Line       User       Host(s)              Idle       Location
*  0 con 0                idle                 00:00:00  
 130 vty 0                idle                 00:00:13 192.168.12.1

  Interface    User               Mode         Idle     Peer Address

R2#clear line vty 0
[confirm]