In this Document 1390451.1 Purpose Scope Details Siebel Components Integration Architecture Preparing Your Environment References APPLIES TO: Siebel CRM - Version 7.8 [19038] to 8.2.2.1 SIA[23012] [Release V7 to V8] This article describes the integration of SSO with the Siebel e-business platform. Siebel is a Web-based suite that combines customer relationship management, partner relationship management, and employee relationship management applications. NOTE: This solution can be implemented with any 3rd Party SSO system with the following prerequisites: The 3rd Party SSO system should be able to send the user identity in an HTTP Header Variable. Siebel Web Single Sign On configuration is configured for the Siebel Web Engine. Siebel Security Adapter (LDAP/ ADSI) Profile is used for authentication. SSO solutions using static trust token in the HTTP header. This integration involves the following Siebel components. Siebel Gateway Name Server: The name server provides persistent backing of Siebel server configuration information, including definitions and assignments of component groups and component operational parameters as well as Siebel server connectivity. Siebel Database Server: The Siebel database server contains the data used by Siebel clients. Siebel Server and Siebel Web Server Extension: The Siebel Server along with the Siebel Web Server Extensions supports Siebel Enterprise Web Applications. The preferred method of Web single sign-on with Siebel is achieved by passing a header variable populated with an attribute value that is stored in the LDAP directory. The SSO solution used permits passing the appropriate HTTP header variable to Siebel. SSO solution intercepts the user's HTTP request and checks for a session cookie. If the cookie does not exist or it has expired, the user is challenged for credentials. The implemented SSO solution verifies the credentials, and if the user is authenticated, the SSO solution redirects the user to the requested resource and passes the required header variable to the Siebel application. The Siebel application initiates a session which is kept at the Siebel Web Engine. Figure 1: SSO Integration with Siebel. Illustrates a scenario where the user authenticates to a SSO-protected resource and is granted access to a Siebel application. l Process overview: Authentication with the integration 1. A user attempts to access content or an application on a server. 2. SSO intercepts the request. 3. To determine if the resource is protected, SSO checks for a security policy. The security policy consists of an authentication scheme, authorization rules, and allowed operations based on authentication and authorization success or failure. 4. If the resource is protected, SSO checks for the user's session cookie. If a valid session exists, SSO passes the header variable to the Siebel server. If a valid session does not exist, SSO prompts the user for credentials. 5. If the credentials are successfully validated, SSO executes the actions that are defined in the security policy and sets an HTTP header variable that maps to the Siebel user ID. 6. SSO redirects the user to the requested Siebel resource. 7. The Siebel application recognizes the SSO header variable, authenticates the user, and initiates a session. The header variable is stored in the Siebel Web Engine. The user can now access any resource that is protected by SSO, for example, a Siebel Web application, without being prompted for credentials. If the user is not authorized, the user is denied access and redirected to another URL as determined by the organization's administrator. Complete the following steps to prepare your environment for the integration. Task overview: Prepare your environment for OM and LDAP integration Configure the out-of-box LDAP Security Adapter profile to talk to the LDAP server for authentication. Refer to Siebel Security Guide > Security Adapter Authentication > Process of Implementing LDAP or ADSI Security Adapter Authentication http://download.oracle.com/docs/cd/E14004_01/books/Secur/Secur_SecAdaptAuth21.html#wp1598728 Configure the Web Single Sign On for the Siebel Application OM. Refer to Siebel Security Guide > Web Single Sign-On Authentication > Process of Implementing Web Single Sign-On http://download.oracle.com/docs/cd/E14004_01/books/Secur/Secur_SSOAuth6.html#wp1003258 Task overview: Prepare your web environment for integration 1. Install a supported directory server according to vendor instructions. 2. Install a supported Web server supported both by Siebel CRM and the SSO solution 3. Configure the Web browser to allow cookies according to vendor instructions. 4. Proceed to the next section. Setting up Siebel for integration with SSO The following procedures describe how to set up Siebel for this integration. 1. Install the following Siebel components, as described in the Siebel documentation: a. Siebel Gateway Server b. Siebel Server c. Siebel Database Server d. Siebel Web Server Extension 2. Verify that Siebel Industry Applications and Web Server Extension are working properly. 3. Ensure that the Siebel client and the Siebel server are able to communicate with each other through TCP/IP, as described in the Siebel documentation. 4. Add at least three users to LDAP: n Test n The Siebel Anonymous User n The Siebel Application User In addition to your regular users, Siebel uses two user accounts from the directory: Anonymous User and Application User. You also need to create an attribute in regular user accounts for storing the Siebel database user information. See the information on creating users in the directory in the Security Guide for Siebel Industry Applications for details. 5. Add user records in the Siebel database that correspond to the registered users. You need a record in the Siebel database that corresponds to the test user that you created in the LDAP directory. You also must confirm that the seed data record exists for the Anonymous User for your Siebel customer or partner application. This database record must match the Anonymous User that you created in the LDAP directory. See the information on adding user records in the Siebel Database in the Security Guide for Siebel Industry Applications for details. Table 1: “eapps.cfg parameters” describes the parameters to set for the eapps.cfg file. This file contains configuration details for the Siebel Web Server Extension component. It is located in the \BIN directory where the Siebel Web Server Extension is installed (for example, C:\siebel81\SWEApp). You can add these parameters to the [Default] section or to the Siebel-specific application, for example, [/esales_enu]. Oracle recommends that you add these parameters to the specific Siebel Industry application section. To encrypt eapps.cfg parameters, follow the steps as per: Siebel Security Guide > Changing or Adding Passwords > Managing Encrypted Passwords in the eapps.cfg File http://docs.oracle.com/cd/B40099_02/books/Secur/Secur_ChangePwd11.html#wp1053529 Table 1 eapps.cfg parameters
The following is an example of a configured eapps.cfg file: [/esales_enu] SingleSignOn = TRUE TrustToken = HELLO UserSpec = SSO_SIEBEL_USER UserSpecSource = Header ConnectString = siebel.TCPIP.None.None://sdchs24n336:3320/siebel/eSalesObjMgr_enu StartCommand = SWECmd=GotoView&SWEView=Home+Page+View+(eSales) WebPublicRootDir = c:\19213\eappweb\public\enu WebUpdatePassword = tieeKaYLjfUBgdi+g== Table 2: Siebel Application Parameter File for the Web Server Extension describes the parameters that you specify in the Siebel Application Parameter File (for example, siebel.cfg).
To set the Siebel Server Configuration Parameters 1. Log in to a Siebel employee application, such as Siebel Call Center, and make one of the following choices from the application-level menu: n To set enterprise level parameters, choose View, select Site Map, then select Server Administration and then select Enterprise Configuration. n To set server level parameters, choose View, select Site Map, then select Server Administration and then select Servers. n To set component level parameters, choose View, select Site Map, then select Server Administration and then select Components. If you are setting parameters at the server or component level: n To set enterprise-level parameters, click the Enterprise Parameters view tab. n To set server-level parameters, click the Server Parameters view tab. n To set component-level parameters, click the Component Parameters view tab. Because application-level parameters override enterprise level settings, Oracle recommends that you set the Siebel parameters for SSO integration at the application level. The following screen shot illustrates setting Siebel Server configuration parameters: 2. Select a parameter record, edit the Current Value field, and then click Save. 3. Restart the Siebel Server to allow the changes to take effect. Setting up SSO for Integration with Siebel Setting up SSO for integration with Siebel involves the following steps. Install all needed componets for the SSO solution as described by vendor. Synchronize the time on all servers where Siebel and the SSO solution. Each Siebel application has its own document directory. You can either protect each application individually or protect the higher-level directory under which the applications reside. Configure SSO to map a SSO Header variable uid to the Siebel uid Remove default no-cache HTTP pragmas that SSO sets as a default.. 5. Note: The Header variable set in the SSO policy should be equal to the value of the UserSpec parameter in the eapps.cfg file. In the following example, the uid is mapped to the SSO_SIEBEL_USER HTTP header variable as follows: Type: HeaderVar Name: SSO_SIEBEL_USER Attribute: uid Allow Access to users by selectinfg SSO/Siebel users to whom you want to grant access to the resources that are protected by the policy domain. Testing Integration between SSO and Siebel After configuring the integration of SSO with Siebel, you should test for successful SSO authentication and single sign-on with Siebel. The following is a test for single sign-on between a non-Siebel, SSO-protected Web page and Siebel Web Server Extension. To test single sign-on 1. Create an SSO domain to protect a Siebel Industry application (for example, eMarketing) and require basic LDAP authentication for it. 2. Open a Web browser and enter the URL for the Web server's main page (http://hostname). The main page is displayed. User authentication should not be required. 3. Access the Siebel Industry application URL for the Web server from the same browser used in step 2. Basic authentication should be required. 4. Access the Siebel Industry application URL for the Web server from the same browser used in step 2. Access to the Siebel Industry application should be allowed. The user should not be challenged for credentials. 5. Close the browser and open a new browser session. Access the Siebel Industry application URL for the Web server. Basic authentication should be required. After the user enters credentials, the Siebel Industry application should be displayed. 6. Access the demo document directory URL for the Web server from the same browser user in step 5. The following is a test of the SSO session timeout. To test SSO session timeout 1. Configure the SSO session timeout to be five (5) minutes and restart the Web servers. 2. Open a Web browser and the Web server's main page (http://hostname). The main page is displayed. User authentication should not be required. 3. Access the Siebel Industry Application URL for the web server from the same browser used in step 2. Basic authentication should be required. After the user enters credentials, the Siebel Industry application should be displayed. 4. Leave the browser window open and idle for more than five minutes. 5. Refresh the browser window using the Refresh button. Basic authentication should be required. After the user enters credentials, the Siebel Industry Application should be displayed. 6. Repeat step 2 to step 4 for the implemented web server. Notes on Integrating in a Multi-Domain Active Directory Environment There are considerations when configuring this integration in a multi-domain Active Directory environment. When the Siebel application is protected, it obtains the SAMAccountname from the HTTP header variable SSO_SIEBEL_USER. However, the Siebel security adapter performs a lookup in Active Directory to verify the account. In a forest, it is best to perform the query against a single domain controller with a query against port 3268. This is the port that is used for the global catalog. See the section on configuring LDAP and ADSI security adapters in the Siebel Security Guide on the Siebel Bookshelf for details. Task overview: Configuration in a multi-domain Active Directory environment 1. Enable Siebel to use Active Directory for authentication, configuring the authentication to start at the root of the forest. 2. Configure the Siebel part of the Active Directory search with the global catalog port number as part of the ldap query. Add the port number to the hostname in the configuration information, as follows: hostname.domainname.com:3268 Configuring Session Logout You can configure an expiration period for a session by setting a session timeout value in both Siebel and many SSO solutions. The timeout values should be the same for both applications. If you configure a timeout value for Siebel that is shorter than the one you configure for SSO, users can re-establish their Siebel session after it times out without providing login credentials. The rest of this section discusses the following topics: Configuring the Siebel Timeout Configuring the SSO Session Timeout Configuring the Siebel Logout Behavior. Configuring the Siebel Timeout The following procedure describes configuring the timeout. For users to be asked to re-authenticate after the timeout limit is reached, you must also configure the same timeout value in SSO. To configure the Siebel timeout 1. Open the eapps.cfg file. It is located in the \BIN directory where the Siebel Web Server Extension is installed (for example, C:\siebel81\SWEApp). 2. Modify the value for the Set SessionTimeout parameter. 3. Restart the Web server. Configuring the SSO Session Timeout The following procedure describes configuring the timeout. Follow your SSO vendor’s procedure for setting session timeouts. Change the value of the Maximum user session time (seconds) field. This value should be the same as the one that you set for the Siebel application. Change the value of the Idle session time (seconds) field. This value should be the same as the one that you set for the Siebel application. Configuring the Siebel Logout Behavior In a Web single sign-on deployment, the user authentication and user management features are the responsibility of SSO. The following features in Siebel are not available in a Web single sign-on environment: n User self-registration n Delegated administration n Login and logout n Change password You configure logout functionality for Siebel users by modifying the Siebel Logout link and redirecting the users to the SSO solution logout page. By doing this, the user is logged out of SSO and by extension from Siebel. The following procedures describe configuring Siebel to point to the default SSO logout.html page. To ensure that logging out of Siebel is also recognized by SSO, the page that logs users out of Siebel must contain SSO logout functionality. The following procedures describe configuring the logout behavior. To prepare for configuration 1. Create a text file that contains the HTML required to redirect the user to the SSO logout page. The following is a URL example: <a href=http://coreidserver.us.orcacle.com/access/oblix/lang/en-us/logout.html> The following is a Javascript example: <html> <head> <script language=”Javascript”> <!--// window.location.href=http://coreidserver.us.oracle.com/access/oblix/lang/en-us/logout.html; //--> </script> </head> </html> 2. Copy the file as follows: $siebelroot/siebsrvr\WEBTEMPL\name.swt Where name is the name of the file that you created in the previous step, for example, coreidlogout.swt. 3. Stop the Siebel server process. 4. Start Siebel Tools. To create a new project 1. In the Object Explorer window, click Project. 2. Select Edit. 3. Select New Record. 4. Enter the name of the file that contains the redirection information as the name for the new record. Do not include the ".swt" extension. In the previous procedure, this name was coreidlogout. 5. Select Locked. To create a Web template 1. In the Object Explorer window, click Web Template. 2. Add a new record. Use the name of the file with the redirection information. Do not include the ".swt" extension. In a previous procedure, an example name of coreidlogout was provided. 3. Enter the Project parameter. As the name of this parameter, use the name of the file with the redirection information. Do not include the ".swt" extension. In a previous procedure, an example name of coreidlogout was provided. 4. Specify Web Page Template for the Type parameter. To create a Web template file 1. Expand the Web Template tree. 2. Click Web Template File. 3. Add a record that is named using the name of the file with the redirection information. Do not include the ".swt" extension. In a previous procedure, an example name of coreidlogout was provided. 4. Enter the name of the file with the redirection information, including the ".swt" extension, as the Filename parameter. To create a Web page for logout 1. In the Object Explorer window, click Web Page. 2. Add a record that is named using the name of the file with the redirection information. Do not include the ".swt" extension. In a previous procedure, an example name of coreidlogout was provided. 3. Enter the name of the file with the redirection information as the Project parameter. Do not include the ".swt" extension. In a previous procedure, an example name of coreidlogout was provided. 4. Select the name of the file with the redirection information as the Web Template parameter. In a previous procedure, an example name of coreidlogout was provided. To complete logout configuration 1. To lock the application project for each project where you want to modify the logout behavior, in the Object Explorer window, click Project. 2. Locate the appropriate project. 3. Select Locked. 4. In the Application window, select the Siebel module to be configured. Each module must be configured separately. 5. Scroll to the right and locate the Logoff Acknowledgement Web Page parameter. Make a note of this value before changing it. 6. Select the name of the file with the redirection information. In a previous procedure, an example name of coreidlogout was provided. 7. Compile the changes. 8. Restart the Siebel Server and the Web server. My Oracle Support resources: OAM and Siebel Integration:1509338.1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
转载于:https://blog.51cto.com/ericklee/1394420
9365
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
