转至：https://www.cnblogs.com/xred/p/7766300.html
shell脚本实现多台服务器自动巡检
摘要：
运维服务一个项目二十多台(或者多台)服务器，每天要做服务器的性能巡检工作是查看服务器的CPU、内存、磁盘空间是否在正常值范围内。像这样每天或者每个固定时间段都做相同的重复工作，为了简化重复的工作，我写了基于liunx服务器的自动巡检脚本，在crontab中设定一个固定时间进行自动执行即可，以减少人工重复劳动的工作。
环境：
我的项目上主要服务器是LINUX和AIX两种服务器，总数在30台左右。现在的工作量是每周巡检两次，都是手动登录到每台服务器使用相应的命令查看服务器性能参数。
思路：
1、所有的服务器之间的网络都是在同一个局域网内，所有网络两两相通。
2、在其中选择一台性能相对较好或者是服务器运行压力较小的服务器，作为巡检服务器。
3、通过这一服务器来实现对其他服务器的巡检，然后把巡检结果记录到巡检服务器上。
4、每台服务器巡检结果都以时间和ip做命名用来区分，最后将所有巡检结果压缩打包。
5、每次维护人员只需要定时去取这个压缩包查看最后结果即可，免去了对每台服务器都需要登录和输入相同的命令进行查看。
具体实现脚本：
cat check.sh
#! /bin/bashecho "start running" | tee -a
LANG=en
set `date`
path="/home/check"
echo "start running" | tee -a $path/log/$1-$2-$3.logif [ -d /home/check/result/$1-$2-$3];then
echo ''
else
mkdir -p /home/check/result/$1-$2-$3
echo `date +"%Y/%m/%d-%H:%M:%S"` "create" "$1-$2-$3" "directory success"|tee -a $path/log/$1-$2-$3.logfi
echo `date +"%Y/%m/%d-%H:%M:%S"` "starting reading linuxconfig.txt" |tee -a $path/log/$1-$2-$3.logcat "$path"/config/linuxconfig.txt| whileread line;doip=`echo $line |cut -d '=' -f2`echo `date +"%Y/%m/%d-%H:%M:%S"` "check LINUX" $ip "starting" |tee -a $path/log/$1-$2-$3.log
(sleep 1#echoaccountechorootsleep 1#echopasswordechorootsleep 3
echo "free -k"
echo ""
echo "df -k"
echo ""#memory_used_rateecho "ps -ef| grep java"
echo ""
echo "netstat -an|egrep -n '80|22|21|23|9043|9044|45331|45332|39194|19195'"
echo ""#echo "ifconfig -a"
echo "/sbin/ip ad"
echo ""
echo "tail -2000 /var/log/messages | grep -v snmp |grep -i error"
echo ""
echo "/bin/dmesg |grep -i error"
echo ""
echo "top -n1|sed -n '1,5p'"
echo "exit"
echo "/usr/bin/vmstat 1 3"
echo ""
sleep 5)|telnet $ip >/home/check/result/$1-$2-$3/$ip-$1-$2-$3-$4.txtecho `date +"%Y/%m/%d-%H:%M:%S"` "check LINUX" $ip "end" |tee -a $path/log/$1-$2-$3.logecho "" | tee -a $path/log/$1-$2-$3.logdone
echo `date +"%Y/%m/%d-%H:%M:%S"` "end reading linuxconfig.txt" |tee -a $path/log/$1-$2-$3.logecho `date +"%Y/%m/%d-%H:%M:%S"` "starting reading AIXconfig.txt" | tee -a $path/log/$1-$2-$3.logcat "$path"/config/AIXconfig.txt| whileread line;doip=`echo $line |cut -d '=' -f2`echo `date +"%Y/%m/%d-%H:%M:%S"` "check IBM AIX" $ip "starting" |tee -a $path/log/$1-$2-$3.log
(sleep 1#echoaccountechorootsleep 1#echopasswordechorootsleep 5
echo ""#echo "df -k"
echo "df -g"
echo ""#memory_used_rateecho "ps -ef| grep java"
echo ""
echo "netstat -an|egrep -n '80|22|21|23|9043|9044|45331|45332|39194|19195'"
echo ""
echo "ifconfig -a"
echo ""
echo "topas"
echo "exit"
sleep 5)|telnet $ip >/home/check/result/$1-$2-$3/$ip-$1-$2-$3-$4.txtecho `date +"%Y/%m/%d-%H:%M:%S"` "check IBM AIX" $ip "end" |tee -a $path/log/$1-$2-$3.logecho "" | tee -a $path/log/$1-$2-$3.logdone
echo `date +"%Y/%m/%d-%H:%M:%S"` "end reading AIXconfig.txt" | tee -a $path/log/$1-$2-$3.logzip -r /home/check/result/$1-$2-$3/$1-$2-$3.zip /home/check/result/$1-$2-$3/*echo "End running "
注意：
该脚本的巡检是基于TELNET服务所以被检服务器必须开启TELNET服务
感谢:http://blog.chinaunix.net/uid-14824714-id-4181103.html
脚本二
转至：
#!/bin/bash
#admin:spirits
#***********CPU检测*************
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器硬件情况开始巡检。。。"top-bn 6 >>topgrep -n "%id" top >>newtopgrep -n "zombie" top >>insisttop
top1=`cat newtop | awk '{print $5}' | sed -n 4p | sed 's/%//g' |sed 's/id,//g'`
top2=`cat newtop | awk '{print $5}' | sed -n 5p | sed 's/%//g' |sed 's/id,//g'`
top3=`cat newtop | awk '{print $5}' | sed -n 6p | sed 's/%//g' |sed 's/id,//g'`
top4=`cat insisttop | awk '{print $10}' | sed -n 2p | sed 's/%//g' |sed 's/id,//g'`
#echo "top4:$top4"
if [ $top4 -gt 0]then
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 采集处理服务器上出现僵尸进程，巡检程序将自动kill该进程，如需人工确认请执行命令top后再执行ps -A -ostat,ppid,pid,cmd | grep -e '^[Zz]'来确认是否将僵尸进程杀死" >> ./newreport.txtps -A -o stat,ppid,pid,cmd | grep -e '^[Zz]' | awk '{print $2}' | xargs kill -9
else
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 采集处理服务器上无僵尸进程正常运行！"
fia=${top1:0:2}
b=${top2:0:2}
c=${top3:0:2}echo "top1: $a"
echo "top2: $b"
echo "top3: $c"
if [ $a -lt 20 ]&&[ $b -lt 20 ]&&[ $c -lt 20 ] ; then
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器CPU占用率不正常，top取到的值是$top1,$top2,$top3,小于参考值20，请及时处理！" >> ./newreport.txtelse
echo "CPU占用率正常!"
fi
rm -rf toprm -rf newtoprm -rf insisttop
#***************内存检测***********free1=`free -g | awk '{print $4}' | sed -n 3p | sed 's/%//g' |sed 's/t//g'`
total=`free -g | awk '{print $2}' | sed -n 2p | sed 's/%//g' |sed 's/t//g'`
canshu=0.2tempd=`echo $total $canshu |awk '{print $1*$2}'`
biaozhun=${tempd%.*}if [ $free1 -le $biaozhun ] ; then
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器内存占用率过高，free -g取到的值是$free1,小于等于参考值$biaozhun，请及时处理！" >> ./newreport.txtelse
echo "内存占用率正常！"
fi#**************文件系统巡检**********df1=`df -h | awk '{print $5}' | sed -n 2p | sed 's/%//g'`
df2=`df -h | awk '{print $5}' | sed -n 3p | sed 's/%//g'`
df3=`df -h | awk '{print $5}' | sed -n 4p | sed 's/%//g'`
df4=`df -h | awk '{print $5}' | sed -n 5p | sed 's/%//g'`
df5=`df -h | awk '{print $5}' | sed -n 6p | sed 's/%//g'`if [ $df1 -gt 90 ]||[ $df2 -gt 90 ]||[ $df3 -gt 90 ]||[ $df4 -gt 90 ]||[ $df5 -gt 90 ] ; then
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器磁盘占用率过高！df -h取到的值是$df1,$df2,$df3,$df4,$df5,参考值是90，若其中一个或一个以上大于参考值，请及时处理！" >> ./newreport.txtelse
echo "磁盘占用率正常！"
fi#*********************磁盘IO性能巡检***************iostat-x 2 5 >>iostat.txt
scvtm1="`cat iostat.txt | awk '{print $11}' | sed -n 16p | sed 's/%//g' `"scvtm2="` cat iostat.txt | awk '{print $11}' | sed -n 17p | sed 's/%//g'`"scvtm3="` cat iostat.txt | awk '{print $11}' | sed -n 18p | sed 's/%//g'`"scvtm4="` cat iostat.txt | awk '{print $11}' | sed -n 19p | sed 's/%//g'`"scvtm13="` cat iostat.txt | awk '{print $11}' | sed -n 25p | sed 's/%//g'`"scvtm6="`cat iostat.txt | awk '{print $11}' | sed -n 26p | sed 's/%//g' `"scvtm7="` cat iostat.txt | awk '{print $11}' | sed -n 27p | sed 's/%//g'`"scvtm8="` cat iostat.txt | awk '{print $11}' | sed -n 28p | sed 's/%//g'`"scvtm9="` cat iostat.txt | awk '{print $11}' | sed -n 34p | sed 's/%//g'`"scvtm10="` cat iostat.txt | awk '{print $11}' | sed -n 35p | sed 's/%//g'`"scvtm11="` cat iostat.txt | awk '{print $11}' | sed -n 36p | sed 's/%//g'`"scvtm12="` cat iostat.txt | awk '{print $11}' | sed -n 37p | sed 's/%//g'`"util1="`cat iostat.txt | awk '{print $12}' | sed -n 16p | sed 's/%//g'`"util2="` cat iostat.txt | awk '{print $12}' | sed -n 17p | sed 's/%//g'`"util3="` cat iostat.txt | awk '{print $12}' | sed -n 18p | sed 's/%//g'`"util4="` cat iostat.txt | awk '{print $12}' | sed -n 19p | sed 's/%//g'`"util5="` cat iostat.txt | awk '{print $12}' | sed -n 25p | sed 's/%//g'`"util6="`cat iostat.txt | awk '{print $12}' | sed -n 26p | sed 's/%//g' `"util7="` cat iostat.txt | awk '{print $12}' | sed -n 27p | sed 's/%//g'`"util8="` cat iostat.txt | awk '{print $12}' | sed -n 28p | sed 's/%//g'`"util9="` cat iostat.txt | awk '{print $12}' | sed -n 34p | sed 's/%//g'`"util10="` cat iostat.txt | awk '{print $12}' | sed -n 35p | sed 's/%//g'`"util11="` cat iostat.txt | awk '{print $12}' | sed -n 36p | sed 's/%//g'`"util12="` cat iostat.txt | awk '{print $12}' | sed -n 37p | sed 's/%//g'`"#***********1/2/3/4****************maxa=`echo "$scvtm1 $scvtm2 $scvtm3 $scvtm4" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`
#*************13/6/7/8/**************
maxb=`echo "$scvtm13 $scvtm6 $scvtm7 $scvtm8" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`
#*************************9/10/11/12******************
maxc=`echo "$scvtm9 $scvtm10 $scvtm11 $scvtm12" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`
#********************util1/2/3/4**********************
maxd=`echo "$util1 $util2 $util3 $util4" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`
#**********************util5/6/7/8*******************
maxe=`echo "$util5 $util6 $util7 $util8" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`
#***********************util9/10/11/12***************
maxf=`echo "$util9 $util10 $util11 $util12" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`
#******************做判断************************
m=${maxa:0:1}
n=${maxb:0:1}
h=${maxc:0:1}
k=${maxd:0:1}
l=${maxe:0:1}
o=${maxf:0:1}
if [ $m -ge 15 ]&&[ $k -ge 99 ]&&[ $k -lt 100 ]$$[ $n -ge 15 ]&&[ $l -ge 99 ]&&[ $l -lt 100 ]&&[ $h -ge 15]&&[ $o -ge 99 ]&&[ $o -lt 100 ]
then
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器磁盘IO存在瓶颈，请及时处理！" >> ./newreport.txt
else
echo "磁盘IO正常！"
fi
rm -rf ./iostat.txt
#*********************************网络连通性检测**********************
network1=`ping -s 4096 -c 5 135.0.51.15 | awk '{print $6}' | sed -n 9p | sed 's/%//g' |sed 's/t//g'`
if [ $network1 -gt 0 ]
then
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器到该目标IP之间的网络不稳定，ping取到的值是$network1,大于参考值是0，系统存在风险，请及时处理！" >> ./newreport.txt
else
echo "网络连通性正常！"
fi
echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器硬件情况巡检结束！"
脚本三
转至：https://blog.51cto.com/xiaorenwutest/2135667
运维需要了解服务器的资源使用率可以通过脚本查看，多台可以通过配合ansible进行查看
#!/bin/bash
phy_cpu=$(cat /proc/cpuinfo | grep "physical id"|sort | uniq | wc -l)
logic_cpu_num=$(cat /proc/cpuinfo | grep "processor"| wc -l)
cpu_core_num=$(cat /proc/cpuinfo | grep "cores"|uniq|awk -F: '{print $2}')
cpu_freq=$(cat /proc/cpuinfo | grep MHz | uniq | awk -F: '{print $2}')
system_core=$(uname -r)
system_version=$(cat /etc/redhat-release)
system_hostname=$(hostname | awk '{print $1}')
systemc_envirement_variables=$(env | grepPATH)
mem_free=$(grep MemFree /proc/meminfo)
disk_usage=$(df -h)
system_uptime=$(uptime)
system_load=$(cat /proc/loadavg)
system_ip=$(ifconfig | grep "inet"|grep -v "127.0.0.1"|awk -F: '{print $1}'|awk 'NR==1{print}'| awk '{print $2}') #自己改的
mem_info=$(/usr/sbin/dmidecode | grep -A 16 "Memory Device"|grep -E "Size|Locator"|grep -v Bank)
mem_total=$(grep MemTotal /proc/meminfo)
day01=$(date +%Y)
day02=$(date +%m)
day03=$(date +%d)
path=inspection.txtecho -e " " >$pathecho -e $day01年$day02月$day03系统巡检报告 >>$pathecho -e 主机名："\t"$system_hostname >>$pathecho -e 服务器IP: "\t"$system_ip >>$pathecho -e 系统内核: "\t"$system_core >>$pathecho -e 操作系统版本："\t"$system_version >>$pathecho -e 磁盘使用情况： "\t""\t" $disk_usage >>$pathecho -e CPU核数："\t"$cpu_core_num >>$pathecho -e 物理CPU个数："\t"$phy_cpu >>$pathecho -e 逻辑CPU个数："\t"$logic_cpu_num >>$pathecho -e 系统环境变量："\t"$systemc_envirement_variables >>$pathecho -e CPU的主频："\t"$cpu_freq >>$pathecho -e 内存简要信息："\t"$mem_info >>$pathecho -e 内存总大小："\t"$mem_total >>$pathecho -e 内存空间： "\t"$mem_free >>$pathecho -e 时间/系统运行时间/当前登陆用户/系统过去1分钟/5分钟/15分钟内平均负载/"\t"$system_uptime >>$pathecho -e 1分钟/5分钟/15分钟平均负载/在采样时刻，运行任务的数目/系统活跃任务的个数/最大的pid值线程/ "\t"$system_load >> $path
脚本四
转至：https://www.cnblogs.com/peter316/p/6287196.html
#!/bin/bash
#set-x2012-02-25#version:2.0export LC_ALL="en_US.UTF-8"server_info(){echo ====================================================#echo ======Time======#date
echo ======1 hostname======
/bin/hostname
echo ======2 IP MASK======
/sbin/ifconfig eth0|grep "inet addr:"|awk '{print $2,"/ "$4}'
echo ======3 Gateway======
cat /etc/sysconfig/network|grep GATEWAY|awk -F "=" '{print $2}'
echo ======4 Product Name======dmidecode| grep -A10 "System Information$" |grep "Product Name:"|awk '{print $3,$4,$5}'##echo ======Host SN======##dmidecode| grep -A10 "System Information$" |grep "Serial Number:"|awk '{print "SN:",$3}'
echo ======5 CPU ======
cat /proc/cpuinfo|grep "name"|cut -d: -f2 |awk '{print "*"$1,$2,$3,$4}'|uniq -cecho ======6 Physical memory number======dmidecode| grep -A 16 "Memory Device$" |grep Size:|grep -v "No Module Installed"|awk '{print "*" $2,$3}'|uniq -cecho ======7 System version ======
cat /etc/issue | head -1
echo =========================================================}
OS_info(){echo ==========================================================
echo ======1 kernel version ======
uname -aecho ======2 running day ======
/usr/bin/uptime |awk '{print $3,$4}'
echo ==========================================================}
performance_info(){echo ==========================================================
echo ======1 CPU used ======top-n 1 |grep C[Pp][Uu] |grep id|awk '{print $5}'|awk -F "%" '{print $1}'#cpu_total=$(cat /proc/stat | grep 'cpu' | awk '{print $2+$3+$4+$5+$6+$7+$8}')
#cpu_idle=$(cat /proc/stat | grep 'cpu' |awk '{print $5}')
#cpu_use=`expr 100-"$cpu_idle/$cpu_total*100"|bc -l`
#echo$cpu_total
#echo$cpu_idle
#echo$cpu_useecho ======2 memory used ======#free -m |grep Mem|awk '{print $2,$3}'mem_total=$(free -m |grep Mem|awk '{print $2}')
mem_used=$(free -m |grep Mem|awk '{print $3}')
mem_rate=`expr $mem_used/$mem_total*100|bc -l`echo$mem_rateecho ======3 swap used ======#free -m |grep Swap|awk '{print $2,$3}'Swap_total=$(free -m |grep Swap|awk '{print $2}')
Swap_used=$(free -m |grep Swap|awk '{print $3}')
Swap_rate=`expr $Swap_used/$Swap_total*100|bc -l`echo$Swap_rateecho ======4 top pic ======top-b -n 1|head -25
echo ==========================================================}
sec_info(){echo ======1 user load ======
w
echo ======2 file used ======
df -ahecho ======3 demsg error======dmesg|grepfail
dmesg|greperrorecho ======4 demsg error======lastlog
}
system_hardware_config(){echo ===========================disk====================================
df -H |awk "{OFS=\"\t\"}{ print \$1,\$2,\$3,\$4,\$5,\$6}"
echo ===========================free====================================
free |head -1 |awk "{OFS=\"\t\"} {print \$1,\$2,\$6}"
free -m |awk "BEGIN{OFS=\"\t\"}{if (NR==2 ||NR==4 )print \$2,\$3,\$7}"}
server_info>>$(/bin/hostname)-`date +%F`
OS_info>>$(/bin/hostname)-`date +%F`
performance_info>>$(/bin/hostname)-`date +%F`
sec_info>>$(/bin/hostname)-`date +%F`echo "run Ok"
######################这是脚本内容结束部分######################################
日常LINUX巡检命令：
hostname
uname -a
netstat-rnifconfig -acat /etc/sysconfig/hwconfcat /proc/meminfocat /proc/cpuinfocat /proc/swaps
sfdisk-gdf–k
sfdisk –g
dmesgmore /var/log/boot.logmore /var/log/messages
以前写的linux服务器的日常巡检脚本：
1、需巡检的服务器上定时执行：
##############脚本开始############################
#!/bin/sh
echo "------------ daily check begin -----------------" >>dc1.txt
#cd/home/wjlcn/monitor/check
cd/home/wjlcn/monitor/check/
date=`date +%c`
filename=`hostname`_check_`date +%Y%m%d`.txtecho "-----------sar -ru 10 3----------------" >>dc1.txt
sar-ru 10 3 |sed -n '21,25p' >>dc1.txtecho "------------top -d 1 -n 1 -------------" >>dc1.txt/usr/bin/top -b -d 1 -n 1 |sed -n '1,10p' |awk '{print $9,$12}' >top1.txtsed '1,7d' top1.txt >>dc1.txtecho "------------free -m ----------------" >>dc1.txtfree -m >>dc1.txtecho "--------------df -h ---------------" >>dc1.txtdf -h >>dc1.txtecho "---------- tripwire --check ----------">>dc1.txt/usr/sbin/tripwire --check|sed -n '10p;18p;33,37p' >>dc1.txtecho $date >>$filenamecat dc1.txt >>$filenameecho $date >>$filenameecho "--------------- the end ---------------" >>$filenamerm dc1.txt top1.txt
2、定时上传至ftp服务器
#!/bin/shcd/home/itownet/monitor/check
LOFFILE=ftp.logftp -n >>$LOFFILE <
open IP
user user password
binary
cd test/pcreport
put*.txt
bye
EOF
########################脚本结束###########################
这样就只需在ftp服务器上巡检所有的服务器即可
脚本五
转至：https://blog.51cto.com/thinkcoding/1769207
文件说明
该Shell脚本旨在针对大量Linux服务器的巡检提供一种相对自动化的解决方案。脚本组成有三部分：shellsh.sh、checksh.sh、file.txt；这三个文件需放在一个文件夹下以root权限执行，缺一不可。
脚本用法：
将要巡检的服务器的IP地址和对应的密码全部放入file.txt中保存，每行一个IP对应一个密码即可。然后用如下命令运行：
#./ shellsh.sh file.txt192.168.182.143 123456
其中file.txt可以更换文件名，192.168.182.143为你想保存巡检日志的到哪个服务器的服务器IP，123456为该服务器的密码。
运行结果：
运行完后会在192.168.182.143服务器的/tmp目录下升成一个目录，即：GatherLogDirectory这个目录下即存放的是被巡检的服务器的巡检日志，这些日志以被巡检的服务器的IP命名，形如：192.168.182.146.log。在被巡检的服务器上会升成两个目录即：CheckScript、 LocalServerLogDirectory；其中CheckScript中是checksh.sh脚本，LocalServerLogDirectory中存放的是checksh.sh在该服务器上运行后升成的日志。
测试结果：
我只在虚拟机上的三台Linux系统上测试过，分别是Ubuntu、RedHat、Kali。运行正常，平均巡检一个服务器花费3分钟。
脚本代码：
shellsh.sh:
#!/bin/bash
login_info=$1gather_server_ip=$2gather_server_password=$3grep_ip=`ifconfig | grep '\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\}' --color=auto -o | sed -e '2,5d'`
GatherPath="/tmp/GatherLogDirectory"CheckScriptPath="/tmp/CheckScript"
if [ $# -ne 3 ]; then
echo -e "Parameters if fault!\n"
echo -e "Please using:$0 login_info gather_server_ip\n"
echo -e "For example: $0 IpAndPassword.txt $grep_ip\n"exit;fi
if [ ! -x "$GatherPath" ];then
mkdir "$GatherPath"
echo -e "The log's path is: $GatherPath"
fi
cat $login_info | whileread linedoserver_ip=`echo $line|awk '{print $1}'`
server_password=`echo $line|awk '{print $2}'`
login_server_command="ssh -o StrictHostKeyChecking=no root@$server_ip"scp_gather_server_checksh="scp checksh.sh root@$server_ip:$CheckScriptPath"
/usr/bin/expect<
set timeout20spawn $login_server_command
expect {"*yes/no" { send "yes\r"; exp_continue }"*password:" { send "$server_password\r"}
}
expect"Permission denied, please try again."{exit}
expect"#" { send "mkdir $CheckScriptPath\r"}
expect eof
exit
EOF/usr/bin/expect<
set timeout20spawn $scp_gather_server_checksh
expect {"*yes/no" { send "yes\r"; exp_continue }"*password:" { send "$server_password\r"}
}
expect"Permission denied, please try again."{exit}
expect"Connection refused"{exit}
expect"100%"expect eof
exit
EOF/usr/bin/expect<
set timeout60spawn $login_server_command
expect {"*yes/no" { send "yes\r"; exp_continue }"*password:" { send "$server_password\r"}
}
expect"Permission denied, please try again."{exit}
expect"#" { send "cd $CheckScriptPath;./checksh.sh $gather_server_ip $gather_server_password\r"}
expect eof
exit
EOFdone
checksh.sh
#!/bin/bash
########################################################################################
#Function:
#This script checks the system's information,disks's information,performance,etc...of the
#server
#
#Author:
#By Jack Wang
#
#Company:
#ShaanXi Great Wall Information Co.,Ltd.
########################################################################################
########################################################################################
#
#GatherServerIpAddress is the server's IP address that gather the checking log
#GatherServerPassword is the server's IP address that gather the checking log
#
########################################################################################
GatherServerIpAddress=$1GatherServerPassword=$2########################################################################################
#GetTheIpCommand is a command that you can get the IP address
########################################################################################
GetTheIpCommand=`ifconfig | grep '\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\}' --color=auto -o | sed -e '2,5d'`
########################################################################################
#LogName is a command that Your logs'name
########################################################################################
LogName=`ifconfig|grep '\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\}' --color=auto -o|sed -e '2,5d'``echo "-"``date +%Y%M%d`
########################################################################################
#
#GatherLogPath is a path that collecting log path
#LocalServerLogPath is local log path
#
########################################################################################
GatherServerLogPath="/tmp/GatherLogDirectory"LocalServerLogPath="/tmp/LocalServerLogDirectory"########################################################################################
#LinuxOsInformation isfunction that usege to collect OS's information
########################################################################################
LinuxOsInformation(){
Hostname=`hostname`
UnameA=`uname -a`
OsVersion=`cat /etc/issue | sed '2,4d'`
Uptime=`uptime|awk '{print $3}'|awk -F "," '{print $1}'`
ServerIp=`ifconfig|grep "inet"|sed '2,4d'|awk -F ":" '{print $2}'|awk '{print $1}'`
ServerNetMask=`ifconfig|grep "inet"|sed '2,4d'|awk -F ":" '{print $4}'|awk '{print $1}'`
ServerGateWay=`netstat -r|grep "default"|awk '{print $2}'`
SigleMemoryCapacity=`dmidecode|grep -P -A5 "Memory\s+Device"|grep "Size"|grep -v "Range"|grep '[0-9]'|awk -F ":" '{print $2}'|sed 's/^[ \t]*//g'`
MaximumMemoryCapacity=`dmidecode -t 16|grep "Maximum Capacity"|awk -F ":" '{print $2}'|sed 's/^[ \t]*//g'`
NumberOfMemorySlots=`dmidecode -t 16|grep "Number Of Devices"|awk -F ":" '{print $2}'|sed 's/^[ \t]*//g'`
MemoryTotal=`cat /proc/meminfo|grep "MemTotal"|awk '{printf("MemTotal:%1.0fGB\n",$2/1024/1024)}'|awk -F ":" '{print $2}'`
PhysicalMemoryNumber=`dmidecode|grep -A16 "Memory Device"|grep "Size:"|grep -v "No Module Installed"|grep -v "Range Size:"|wc -l`
ProductName=`dmidecode|grep -A10 "System Information"|grep "Product Name"|awk -F ":" '{print $2}'|sed 's/^[ \t]*//g'`
SystemCPUInfomation=`cat /proc/cpuinfo|grep "name"|cut -d: -f2|awk '{print "*"$1,$2,$3,$4}'|uniq -c|sed 's/^[ \t]*//g'`echo -e "Hostname|$Hostname\nUnamea|$UnameA\nOsVersion|$OsVersion\nUptime|$Uptime\nServerIp|$ServerIp\nServerNetMask|$ServerNetMask\nServerGateWay|$ServerGateWay\nSigleMemoryCapacity|$SigleMemoryCapacity\nMaximumMemoryCapacity|$MaximumMemoryCapacity\nNumberOfMemorySlots|$NumberOfMemorySlots\nMemoryTotal|$MemoryTotal\nPhysicalMemoryNumber|$PhysicalMemoryNumber\nProductName|$ProductName\nSystemCPUInformation|$SystemCPUInfomation"}
PerformanceInfomation (){
CPUIdle=`top -d 2 -n 1 -b|grep C[Pp][Uu]|grep id|awk '{print $5}'|awk -F "%" '{print $1}'`
CPUloadAverage=`top -d 2 -n 1 -b|grep "load average:"|awk -F ":" '{print $5}'|sed 's/^[ \t]*//g'`
ProcessNumbers=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $3}'`
Proce***unning=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $8}'`
ProcessSleeping=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $11}'`
ProcessStoping=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $16}'`
ProcessZombie=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $21}'`
UserSpaceCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $4}'`
SystemSpaceCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $8}'`
ChangePriorityCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $12}'`
WaitingCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $19}'`
HardwareIRQCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $23}'`
SoftwareIRQCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $27}'`
MemUsed=`top -d 2 -n 1 -b|grep "Mem"|awk -F "[: ,]" '{print $11}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`
MemFreeP=`top -d 2 -n 1 -b|grep "Mem"|awk -F "[: ,]" '{print $16}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`
MemBuffersP=` top -d 2 -n 1 -b|grep "Mem"|awk -F "[: ,]" '{print $22}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`
CacheCachedP=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $24}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`
CacheTotal=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $4}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`
CacheUsed=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $14}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`
CacheFree=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $18}'|tr -d "a-zA-Z"|awk '{printf("%dM\n",$1/1024)}'`echo -e "CPUIdle|$CPUIdle\nCPUloadAverage|$CPUloadAverage\nProcessNumbers|$ProcessNumbers\nProce***unning|$Proce***unning\nProcessSleeping|$ProcessSleeping\nProcessStoping|$ProcessStoping\nProcessZombie|$ProcessZombie\nUserSpaceCPU|$UserSpaceCPU\nSystemSpaceCPU|$SystemSpaceCPU\nChangePriorityCPU|$ChangePriorityCPU\nWaitingCPU|$WaitingCPU\nHardwareIRQCPU|$HardwareIRQCPU\nSoftwareIRQCPU|$SoftwareIRQCPU\nMemUsed|$MemUsed\nMemFreeP|$MemFreeP\nMemBuffersP|$MemBuffersP\nCacheCachedP|$CacheCachedP\nCacheTotal|$CacheTotal\nCacheUsed|$CacheUsed\nCacheFree|$CacheFree\n"}
OprateSystemSec () {echo '======================UserLogin======================'
w
echo '======================FileUsed======================='
df -ahecho '======================dmesgError====================='dmesg| greperrorecho '======================dmesgFail======================'dmesg| grepFailecho '======================BootLog========================'
more /var/log/boot.log | grep -V "OK" | sed '1,6d'
echo '======================route -n======================='route-necho '======================iptables -L===================='iptables-Lecho '======================netstat -lntp=================='netstat-lntpecho '======================netstat -antp=================='netstat-antpecho '======================BootLog========================'netstat-secho '======================netstat -s====================='
last
echo '======================du -sh /etc/==================='
du -sh /etc/
echo '======================du -sh /boot/=================='
du -sh /boot/
echo '======================du -sh /dev/==================='
du -sh /dev/
echo '======================df -h=========================='
df -hecho '======================mount | column -t=============='
mount | column -t
}
TopAndVmstat(){
top-d 2 -n 1 -b
vmstat1 10}
CheckGatherLog(){if [ -f "$LocalServerLogPath/$GetTheIpCommand.log" ];then
rm -rf $LocalServerLogPath/$GetTheIpCommand.logfi
if [ ! -x "$LocalServerLogPath" ];then
mkdir "$LocalServerLogPath"
fi
if [ ! -f "$LocalServerLogPath/$GetTheIpCommand.log" ];then
touch $LocalServerLogPath/$GetTheIpCommand.log
LinuxOsInformation>>$LocalServerLogPath/$GetTheIpCommand.log
PerformanceInfomation>>$LocalServerLogPath/$GetTheIpCommand.log
OprateSystemSec>>$LocalServerLogPath/$GetTheIpCommand.log
TopAndVmstat>>$LocalServerLogPath/$GetTheIpCommand.logfi}
CheckGatherLog
SCP_LOG_TO_GATHER_SERVER="scp $LocalServerLogPath/$GetTheIpCommand.log root@$GatherServerIpAddress:$GatherServerLogPath"
/usr/bin/expect<
set timeout50spawn $SCP_LOG_TO_GATHER_SERVER
expect {"*yes/no)?"{
send"yes\n"
"*password:*" {send "GatherServerPassword\n"}
}"*password:"{
send"$GatherServerPassword\n"}
}
expect"*password:" { send "$GatherServerPassword\n"}
expect"100%"expect eof
EOF
file.txt内容形式
192.168.182.143 123456
192.168.182.129 123456
192.168.182.146 123456
注：192.168.182.143是被巡检的服务器ip，123456是被巡检的服务器密码。
声明：此脚本将巡检结果用awk和sed以及grep进行了过滤，以便格式化显示和excel进行处理。由于水平有限，如果有大神认为还有更好的解决方案或者这个脚本还有改进的地方，请指出。我们大家共同学习，共同进步。
个人QQ：1299039410
脚本六
转至：https://www.jb51.net/article/112586.htm
#!/bin/bash
check_process(){
tolprocess=`ps auxf|grep DisplayMa[nager]|wc -l`#if [ "$tolprocess" -lt "1" ];then
if [ "$tolprocess" -ge "1" ];then
echo 'process ok'
else
echo 'fail'
fi}
check_log(){if [ -e /etc/syslog-ng/syslog-ng.conf ];thenconlog=`cat '/etc/syslog-ng/syslog-ng.conf'|grep "10.70.72.253"|wc -l`if [ "$conlog" -ge "1" ];then
echo 'syslog-ng ok'
fi
elif [ -e /etc/syslog.conf ];thenconlog=`cat '/etc/syslog.conf'|grep "10.70.72.253"|wc -l`if [ "$conlog" -ge "1" ];then
echo 'syslog ok'
fi
else
echo 'log not find or error'
fi}
check_cpuidle(){
mincpu=`sar -u 2 10|grep all|awk '{print $NF}'|sort -nr|tail -1`if [ $(echo "${mincpu} < 20" | bc) = 1 ];then
#if [ "$mincpu" -le "20" ];then
echo 'cpu idle is less than 20% ,please check'
else
echo 'cpu idle is more than 20%, it is ok'
fi}
check_mem(){
vmstat2 10}
check_disk(){
chkdsk=`fdisk -l|egrep 'failed|unsynced|unavailable'|wc -l`if [ "$chkdsk" -ge "1" ];then
echo 'fdisk check ok'
else
echo 'fdisk check find error,please check your disk'
fi}
check_io(){
util=`sar -d 2 10|egrep -v 'x86|^$|await'|awk '{print $NF}'|sort -nr|tail -1`
await=`sar -d 2 10|egrep -v 'x86|^$|await'|awk '{print $(NF-2)}'|sort -nr|tail -1`if [ $(echo "${util} < 80" | bc) = 1 ] && [ $(echo "${await} < 100" | bc) = 1 ] ;then
echo 'disk io check is fine'
else
echo 'disk io use too high'
fi}
check_swap(){
tolswap=`cat /proc/meminfo|grep SwapTotal|awk '{print $2}'`
#awk '/SwapTotal/{total=$2}/SwapFree/{free=$2}END{print (total-free)/1024}' /proc/meminfo
useswap=`awk '/SwapTotal/{total=$2}/SwapFree/{free=$2}END{print (total-free)}' /proc/meminfo `
util=`awk 'BEGIN{printf "%.1f\n",'$useswap'/'$tolswap'}'`if [ $(echo "${util} < 0.3" | bc) = 1 ] || [ $(echo "${useswap} < 1024" | bc) = 1 ] ;then
echo 'swap use is ok'
else
echo "useswap: $useswap kb, swap util is $util"
fi}
check_dmesg(){
chkdm=`dmesg |egrep 'scsi reset|file system full'|wc -l`if [ "$chkdm" -ge "1" ];then
echo 'dmesg test ok'
else
echo 'dmesg check find error'
fi}
check_boot(){
chkdm=`cat /var/log/boot.msg|egrep 'scsi reset|file system full'|wc -l`if [ "$chkdm" -ge "1" ];then
echo 'boot check fine'
else
echo 'boot check find error'
fi}
check_inode(){
maxinode=`df -i|awk '{print $5}'|egrep -v 'IUse|-' |sed 's/%//g'|sort -nr|head -1`if [ $(echo "${maxinode} < 80" | bc) = 1 ];then
echo 'inode check ok'
else
echo 'inode used more than 80%'
fi}
check_df(){
dfuse=`df -HT|awk '{print $6}'|grep -v Use|sed 's/%//g'|sort -nr|head -1`if [ $(echo "${dfuse} < 80" | bc) = 1 ];then
echo 'disk used is less than 80% ,it is ok !'
elif [ $(echo "${dfuse} > 80" | bc) = 1 ] && [ $(echo "${dfuse} < 90" | bc) = 1 ];then
echo 'warning , disk used more than 80% and less than 90%'
else
echo 'Critical, disk used more than 90%'
fi}echo '################### check process ###################'check_processecho '################### check syslog ####################'check_logecho '################### check cpuidle ###################'check_cpuidleecho '################### echo memory stat ################'check_memecho '################### check fdisk #####################'check_diskecho '################### check io used ###################'check_ioecho '################### check swap used #################'check_swapecho '################### check dmesg #####################'check_dmesgecho '################### check inode #####################'check_inodeecho '################### check disk used #################'check_df
保存为/system/check_linux.sh
1167
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
