RationalDMIS2024线轮廓和面轮廓评价

一．线轮廓

1.直线

（1）无基准的

相对于自身参考，仅形状。

（2）形状和位置

2.曲线

（1）无基准

方法一：

或

方法二

（2）有基准

3.特征组（组合）

（1）无基准

F(PATERN1)=FEAT/PATERN,F(G-1),F(G-2),F(G-3),F(G-4),F(G-5),F(G-6),F(G-7),F(G-8),F(G-9),F(G-10),F(G-11),F(G-12)

（2）形状和位置

二.面轮廓

1.曲面

直接拾取测量

2.特征组（组合）

（1）无基准

F(PATERN2)=FEAT/PATERN,F(K-1),F(K-2),F(K-3),F(K-4),F(K-5),F(K-6),F(K-7),F(K-8),F(K-9),F(K-10),F(K-11),F(K-12)

（2）形状和位置

*/
MODE/MAN
F(PLN1)=FEAT/PLANE,CART,474.1261,233.0412,51.4927,-0.0012,0.0006,1.0000
Measurement points are created through actual points
MEAS/LINE, F(LN1), 2
PTMEAS/CART, 448.0756, 194.1936, 31.6053, 0.0028, -1.0000, 0.0000
PTMEAS/CART, 505.2718, 194.3533, 31.6065, 0.0028, -1.0000, 0.0000
ENDMES
F(PT1)=FEAT/POINT,CART,443.4838,216.7744,46.4752,-1.0000,0.0000,0.0000
MEAS/POINT, F(PT1), 1
PTMEAS/CART, 443.4838,216.7744,46.4752,-1.0000,0.0000,0.0000
ENDMES
D(CRD1) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN1), XDIR, YORIG, FA(PT1), XORIG
D(CRD1) = TRANS/ZORIG, -35, YORIG, -0, XORIG, -0
$$ Set.CAD2PCS.CADM_1
MODE/PROG,MAN
F(PLN2)=FEAT/PLANE,CART,31.2500,46.8106,35.0000,0.0000,-0.0000,1.0000

SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, F(PLN2), 20.0000
CALL/M(EASI_CLEARPLN_GOTO), 0, -3.4960, 22.5768, 56.4944
MEAS/PLANE, F(PLN2), 8
GOTO/CART, -3.4960, 22.5768, 56.4944
GOTO/CART, 4.6246, 84.5155, 56.4944
PTMEAS/CART, 4.6246, 84.5155, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 5.1805, 28.3507, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 75.1783, 15.9068, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 89.1776, 33.5555, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 112.2944, 45.1929, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 111.2429, 65.8812, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 91.5755, 85.9693, 35.0000, 0.0000, -0.0000, 1.0000
PTMEAS/CART, 39.3573, 88.5238, 35.0000, 0.0000, -0.0000, 1.0000
ENDMES
F(LN2)=FEAT/LINE,BND,CART,0.0000,0.0000,20.0208,70.0000,-0.0000,20.0208,-0.0000,-1.0000,0.0000
CALL/M(EASI_CLEARPLN_GOTO), 0, 39.3532, 88.5003, 56.4944
MEAS/LINE, F(LN2), 5
GOTO/CART, 39.3532, 88.5003, 56.4944
GOTO/CART, 2.0000, -3.4944, 56.4944
PTMEAS/CART, 2.0000, 0.0000, 17.0208, 0.0000, -1.0000, 0.0000
PTMEAS/CART, 18.5000, 0.0000, 17.0208, 0.0000, -1.0000, 0.0000
PTMEAS/CART, 35.0000, 0.0000, 17.0208, 0.0000, -1.0000, 0.0000
PTMEAS/CART, 51.5000, 0.0000, 17.0208, 0.0000, -1.0000, 0.0000
PTMEAS/CART, 68.0000, 0.0000, 17.0208, 0.0000, -1.0000, 0.0000
GOTO/CART, 68.0000, -3.4944, 56.4944
ENDMES
F(LN3)=FEAT/LINE,BND,CART,-0.0000,14.9792,35.0000,0.0000,93.6212,35.0000,-1.0000,0.0000,0.0000
CALL/M(EASI_CLEARPLN_GOTO), 0, -3.4944, 16.9792, 56.4944
MEAS/LINE, F(LN3), 5
GOTO/CART, -3.4944, 16.9792, 56.4944
PTMEAS/CART, 0.0000, 16.9792, 32.0000, -1.0000, 0.0000, 0.0000
PTMEAS/CART, 0.0000, 35.6397, 32.0000, -1.0000, 0.0000, 0.0000
PTMEAS/CART, 0.0000, 54.3002, 32.0000, -1.0000, 0.0000, 0.0000
PTMEAS/CART, 0.0000, 72.9607, 32.0000, -1.0000, 0.0000, 0.0000
PTMEAS/CART, 0.0000, 91.6212, 32.0000, -1.0000, 0.0000, 0.0000
GOTO/CART, -3.4944, 91.6212, 56.4944
ENDMES
F(PT_INTR1)=FEAT/POINT,CART,0.0000,0.0000,17.0242,0.0000,0.0000,1.0000
CONST/POINT,F(PT_INTR1),INTOF,FA(LN2),FA(LN3),2D
D(CRD2) = DATSET/FA(PLN2), ZDIR, ZORIG, FA(LN2), XDIR, FA(PT_INTR1), XORIG
D(CRD2) = TRANS/ZORIG, -35, YORIG, FA(PT_INTR1), XORIG, -0
Measurement points are created through nominal points
Measurement points are created through nominal points
KaTeX parse error: Undefined control sequence: \Data at position 730: …-0.0000,IGES,'.\̲D̲a̲t̲a̲\果子\GCV1.igs' M… Measurement points are created through nominal points
CALL/M(EASI_CLEARPLN_GOTO), 0, 115.1207, 100.0000, 31.9964
MEAS/POINT, F(G-1), 1
GOTO/CART, 115.1207,100.0000,56.4944
PTMEAS/CART, 115.1207,100.0000,28.5020,0.0000,0.0000,1.0000
GOTO/CART, 115.1207,100.0000,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 99.5402, 100.0000, 31.9964
MEAS/POINT, F(G-3), 1
GOTO/CART, 99.5402,100.0000,56.4944
PTMEAS/CART, 99.5402,100.0000,28.5020,0.0000,0.0000,1.0000
GOTO/CART, 99.5402,100.0000,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 83.9597, 100.0000, 31.9964
MEAS/POINT, F(G-5), 1
GOTO/CART, 83.9597,100.0000,56.4944
PTMEAS/CART, 83.9597,100.0000,28.5020,0.0000,0.0000,1.0000
GOTO/CART, 83.9597,100.0000,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 68.3791, 100.0000, 31.9964
MEAS/POINT, F(G-7), 1
GOTO/CART, 68.3791,100.0000,56.4944
PTMEAS/CART, 68.3791,100.0000,28.5020,0.0000,0.0000,1.0000
GOTO/CART, 68.3791,100.0000,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 54.8396, 100.0000, 34.0459
MEAS/POINT, F(G-9), 1
GOTO/CART, 54.8396,100.0000,56.4944
PTMEAS/CART, 53.3105,100.0000,30.9039,0.4376,0.0000,0.8992
GOTO/CART, 54.8396,100.0000,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 38.2468, 100.0000, 37.6349
MEAS/POINT, F(G-11), 1
GOTO/CART, 38.2468,100.0000,56.4944
PTMEAS/CART, 38.2468,100.0000,34.1405,-0.0000,0.0000,1.0000
GOTO/CART, 38.2468,100.0000,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 50.1630, 99.6778, 36.2210
MEAS/POINT, F(K-1), 1
GOTO/CART, 50.1630,99.6778,56.4944
PTMEAS/CART, 49.1727,98.7395,33.0039,0.2834,0.2685,0.9206
GOTO/CART, 50.1630,99.6778,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 48.4755, 116.1792, 32.3174
MEAS/POINT, F(K-3), 1
GOTO/CART, 48.4755,116.1792,56.4944
PTMEAS/CART, 46.9611,115.3183,29.2882,0.4334,0.2464,0.8669
GOTO/CART, 48.4755,116.1792,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 26.9505, 123.8935, 33.4132
MEAS/POINT, F(K-5), 1
GOTO/CART, 26.9505,123.8935,56.4944
PTMEAS/CART, 26.9505,122.7460,30.1126,0.0000,0.3284,0.9445
GOTO/CART, 26.9505,123.8935,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 27.0821, 107.0289, 36.5726
MEAS/POINT, F(K-7), 1
GOTO/CART, 27.0821,107.0289,56.4944
PTMEAS/CART, 27.0821,106.5542,33.1106,0.0000,0.1358,0.9907
GOTO/CART, 27.0821,107.0289,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 11.6850, 99.6314, 37.7371
MEAS/POINT, F(K-9), 1
GOTO/CART, 11.6850,99.6314,56.4944
PTMEAS/CART, 11.6850,99.0933,34.2844,0.0000,0.1540,0.9881
GOTO/CART, 11.6850,99.6314,56.4944
ENDMES
CALL/M(EASI_CLEARPLN_GOTO), 0, 10.8512, 116.5080, 35.4039
MEAS/POINT, F(K-11), 1
GOTO/CART, 10.8512,116.5080,56.4944
PTMEAS/CART, 10.8512,115.9514,31.9541,0.0000,0.1593,0.9872
GOTO/CART, 10.8512,116.5080,56.4944
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 9.5088, 123.4981, 33.5502
MEAS/POINT, F(K-12), 1
GOTO/CART, 9.5088,123.4981,56.4944
PTMEAS/CART, 9.5088,122.3584,30.2469,0.0000,0.3261,0.9453
GOTO/CART, 9.5088,123.4981,56.4944
ENDMES
F(PATERN2)=FEAT/PATERN,F(K-1),F(K-2),F(K-3),F(K-4),F(K-5),F(K-6),F(K-7),F(K-8),F(K-9),F(K-10),F(K-11),F(K-12)
T(TPFS2)=TOL/PROFS,0.1500,0.1500,FA(PATERN2)
OUTPUT/FA(PATERN2),TA(TPFS2)
T(TPFS3)=TOL/PROFS,0.1500,0.1500,FA(PLN2),FA(LN2),FA(LN3)
OUTPUT/FA(PATERN2),TA(TPFS3)

原创作者: u_14941238 转载于: https://blog.51cto.com/u_14941238/11524776