// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
#define SERIAL_PORT 0
//
选择用于和上位机通讯的串口,该值请保持
0
不动
// This determines the communication speed of the printer
// This determines the communication speed of the printer
#define BAUDRATE 250000
//
波特率配置,该值必须和你的上位机波特率相匹配,否则无法通讯。常用波特率
有
115200
和
250000
// This enables the serial port associated to the Bluetooth interface
//#define BTENABLED // Enable BT interface on AT90USB devices
The following define selects which electronics board you have. Please choose the