linux arm 时钟修改,arm linux-----时钟时区设置

参考资料

配置方法

添加timezone文件 将PC端的/usr/share/zoneinfo整个zoneinfo文件夹复制到ROOTFS的/usr/share下，这样嵌入式系统中就有了timezone。

root@imx6ul:~# ls /usr/share/zoneinfo/Asia/Shanghai

/usr/share/zoneinfo/Asia/Shanghai

修改系统UTC 标记为 CST UTC=no

root@imx6ul:~# cat /etc/default/rcS

#

# Defaults for the boot scripts in /etc/rcS.d

#

# Time files in /tmp are kept in days.

TMPTIME=0

# Set to yes if you want sulogin to be spawned on bootup

SULOGIN=no

# Set to no if you want to be able to login over telnet/rlogin

# before system startup is complete (as soon as inetd is started)

DELAYLOGIN=no

# Assume that the BIOS clock is set to UTC time (recommended)

UTC=no

# Set VERBOSE to "no" if you would like a more quiet bootup.

VERBOSE=no

# Set EDITMOTD to "no" if you don't want /etc/motd to be edited automatically

EDITMOTD=no

# Whether to fsck root on boot

ENABLE_ROOTFS_FSCK=no

# Set FSCKFIX to "yes" if you want to add "-y" to the fsck at startup.

FSCKFIX=yes

# Set TICKADJ to the correct tick value for this specific machine

#TICKADJ=10000

# Enable caching in populate-volatile.sh

VOLATILE_ENABLE_CACHE=yes

# Indicate whether the rootfs is intended to be read-only or not.

# Setting ROOTFS_READ_ONLY to yes and rebooting will give you a read-only rootfs.

# Normally you should not change this value.

ROOTFS_READ_ONLY=no

系统RTC硬件时钟注意事项

# hwclock -w // 默认是指本地时钟写入到硬件时钟

# hwclock -r // 默认是按照本地时钟显示