Linux如何查看物理机IP,linux下查看本机IP的两种方法

1)ifconfig命令

输出如下：

[root@topgun /home/cly]

# ifconfig

eth0: flags=4163  mtu 1500

inet 192.168.128.132  netmask 255.255.255.0  broadcast 192.168.128.255

inet6 fe80::20c:29ff:fe45:63ba  prefixlen 64  scopeid 0x20

ether 00:0c:29:45:63:ba  txqueuelen 1000  (Ethernet)

RX packets 1936  bytes 2440516 (2.3 MiB)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 1207  bytes 94802 (92.5 KiB)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

device interrupt 19  base 0x2024

lo: flags=73  mtu 16436

inet 127.0.0.1  netmask 255.0.0.0

inet6 ::1  prefixlen 128  scopeid 0x10

loop  txqueuelen 0  (Local Loopback)

RX packets 12  bytes 744 (744.0 B)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 12  bytes 744 (744.0 B)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

该命令属于包：

[root@topgun /home/cly]

# pacman -Qo ifconfig

/sbin/ifconfig 属于 net-tools 1.60.20120804git-2

2)ip address命令

输出如下：

[root@topgun /home/cly]

# ip address

1: lo: mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 00:0c:29:45:63:ba brd ff:ff:ff:ff:ff:ff

inet 192.168.128.132/24 brd 192.168.128.255 scope global eth0

inet6 fe80::20c:29ff:fe45:63ba/64 scope link

valid_lft forever preferred_lft forever

该命令属于包：

[root@topgun /home/cly] # pacman -Qo ip /usr/sbin/ip 属于 iproute2 3.5.1-1