linux看网卡主备,linux网卡bounding的主备模式下上层路由端需要什么设置？

不需要做路由设置，给你个列子：# cat /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0BOOTPROTO=noneONBOOT=yesUSERCTL=noIPADDR=103.10.84.96NETMASK=255.255.255.128GATEWAY=103.10.84.1# cat /etc/sysconfig/network-scripts/ifcfg-eth2 # Broadcom Corporati...显示全部

不需要做路由设置，给你个列子：

# cat /etc/sysconfig/network-scripts/ifcfg-bond0

DEVICE=bond0

BOOTPROTO=none

ONBOOT=yes

USERCTL=no

IPADDR=103.10.84.96

NETMASK=255.255.255.128

GATEWAY=103.10.84.1

# cat /etc/sysconfig/network-scripts/ifcfg-eth2

# Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe

DEVICE=eth2

BOOTPROTO=none

HWADDR=90:b1:1c:09:83:06

ONBOOT=yes

MASTER=bond0

SLAVE=yes

# cat /etc/sysconfig/network-scripts/ifcfg-eth3

# Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe

DEVICE=eth3

BOOTPROTO=none

ONBOOT=yes

HWADDR=90:b1:1c:09:83:07

MASTER=bond0

SLAVE=yes

# cat /etc/modprobe.conf

alias eth0 tg3

alias eth1 tg3

alias eth2 tg3

alias eth3 tg3

alias scsi_hostadapter megaraid_sas

alias scsi_hostadapter1 ahci

alias bond0 bonding

options bond0 miimon=100 mode=1

mode=0  负载均衡(需要交换机支持)  mode=1  热备,一块网停止工作,另一块网卡工作

重启网卡收起