与其说协程是一个轻量级线程,我更愿意把它当然一个个待执行/可执行的任务。这样就引申出一个问题——协程是运行在哪个线程上的?这就是本篇文章想要探讨的问题,同时我们也将学习如何让协程在特定的线程里执行。
首先来看一个例子:
fun log(msg: String) {
println("[${Thread.currentThread().name}] $msg")
}
fun main() = runBlocking {
val job1 = GlobalScope.launch {
log("launch before delay")
delay(100)
log("launch after delay")
}
val job2 = GlobalScope.launch {
log("launch2 before delay")
delay(200)
log("launch2 after delay")
}
job1.join()
job2.join()
}
下面是在我机器上的一个输出(需要加入 JVM 参数 -Dkotlinx.coroutines.debug 才会打印协程名):
[DefaultDispatcher-worker-2 @coroutine#3] launch2 before delay
[DefaultDispatcher-worker-1 @coroutine#2] launch before delay
[DefaultDispatcher-worker-1 @coroutine#2] launch after delay
[DefaultDispatcher-worker-1 @coroutine#3] launch2 after delay
这个输出有两个要点:
- 从线程名推断,两个协程很可能运行在某个线程池中
- 第二个协程先运行在 worker-2,然后又运行在 worker-1
关于第一点, launch 的文档有这么一句话:
❝If the context does not have any dispatcher nor any other ContinuationInterceptor, then Dispatchers.Default is used.
❞
这里引入了本篇文章的主题——Distpacher,正是它决定了协程运行在哪个线程里。Dispatcher 的问题我们马上会谈到,我们先看看第二个问题。
第二个协程先运行在 worker-2,然后又运行在 worker-1。这提醒我们,很多时候不能假设协程会运行在同一个线程里,它唯一保证的是,协程中的代码会串行执行。由于协程是串行执行的,即使前后不是在同一个线程,我们也能安全地对「局部变量」进行读写:
suspend fun foo() {
val list = someSuspendFn()
val list2 = someOtherSuspendFn()
// cope with list/list2
}
现在我们回到本篇文章的重点——Dispatcher。所谓的 Dispatcher,中文我们可以叫它分发器,是用来将协程分发到特定线程去执行的。它的接口是 ContinuationInterceptor:
interface ContinuationInterceptor : CoroutineContext.Element {
fun interceptContinuation(continuation: Continuation<T>): Continuation
}
注意,它继承了 CoroutineContext.Element,所以他也是一个 context。
Continuation 代表着协程运行的某个中间运行状态:
public interface Continuation<in T> {
public val context: CoroutineContext
public fun resumeWith(result: Result<T>)
}
当需要继续执行协程时,Kotlin 会调用它的 resumeWith 方法。ContinuationInterceptor 的 interceptContinuation 可以返回一个新的 Continuation,在这个新的 Continuation 的 resumeWith 里面,我们可以让协程运行在任意的线程里。
下面我们看一个最简单的 Dispatcher:
class DummyDispatcher
: AbstractCoroutineContextElement(ContinuationInterceptor),
ContinuationInterceptor {
override fun interceptContinuation(continuation: Continuation<T>): Continuation {return continuation
}
}fun main() = runBlocking {val dispatcher = DummyDispatcher()
log("which thread am I in?")val job = GlobalScope.launch(dispatcher) {
log("launch before delay")
delay(100)
log("launch after delay")
}
job.join()
}
由于我们的 DummyDispatcher 什么也没做,协程会继续在原来的线程中执行。运行结果为:
[main @coroutine#1] which thread am I in?
[main @coroutine#1] launch before delay
[kotlinx.coroutines.DefaultExecutor] launch after delay
一开始 runBlocking 所在的线程为 main,由于我们返回了原始的 continuation,所以在 delay 前的那个调用还是在线程 main;最后一个打印之所以换到了另一个线程,是因为 delay 内部使用了这个 DefaultExecutor 来实现延迟执行。
现在我们来构造一个真正的 ContinuationInterceptor,它会让协程运行在我们创建的线程池里:
class SingleThreadedDispatcher
: AbstractCoroutineContextElement(ContinuationInterceptor),
ContinuationInterceptor {
private val executorService = Executors.newSingleThreadExecutor {
Thread(it, "SingleThreadedDispatcher")
}
override fun interceptContinuation(continuation: Continuation<T>): Continuation {return OurContinuation(continuation)
}inner class OurContinuation<T>(private val origin: Continuation) : Continuation {override val context: CoroutineContext = origin.contextoverride fun resumeWith(result: Result<T>) {
executorService.submit {// origin.resumeWith 会执行协程中的代码。在这里调用的话,协程就// 能运行在我们自定义的线程池中了
origin.resumeWith(result)
}
}
}fun close() {
executorService.shutdown()
}
}fun main() = runBlocking {val dispatcher = SingleThreadedDispatcher()
log("which thread am I in?")val job = GlobalScope.launch(dispatcher) {
log("launch before delay")
delay(100)
log("launch after delay")
}
job.join()
dispatcher.close()
}
程序的输出为:
[main @coroutine#1] which thread am I in?
[SingleThreadedDispatcher] launch before delay
[SingleThreadedDispatcher] launch after delay
可以看到,它确实运行在我们定义的那个线程池中。
注意到每次调用 executorService.submit 我们都创建了一个新对象,还可以复用 OurContinuation:
class SingleThreadedDispatcher {
// ...
inner class OurContinuation<T>(private val origin: Continuation)
: Continuation, Runnable {override val context: CoroutineContext = origin.contextprivate var result: Result? = nulloverride fun resumeWith(result: Result<T>) {this.result = result
executorService.submit(this)
}override fun run() {
origin.resumeWith(result as Result)
}
}
}
眼尖的你有没有留意到,虽然我一直在说 Dispatcher,可是前面我们实现的却是 ContinuationInterceptor,是 「interceptor」啊!其实正常情况下,我们一般不会直接来实现 ContinuationInterceptor,而是实现它的子类 CoroutineDispatcher,这就是为什么我们都说 Dispatcher 而不是 Interceptor。本质上他们的实现和前面的 SingleThreadedDispatcher 是一样的,读者可以自行阅读源码了解一下。
最后一个问题是,在哪里调用的 interceptContinuation?答案可以在 suspendCoroutine 的实现里找到:
public suspend inline fun suspendCoroutine(crossinline block: (Continuation<T>) -> Unit): T =
suspendCoroutineUninterceptedOrReturn { c: Continuation ->val safe = SafeContinuation(c.intercepted())
block(safe)
safe.getOrThrow()
}
通过 coroutine.intrisics 创建的协程都是 unintercepted 的,一般情况下,我们会调用 intercepted() 方法对它做一个拦截:
public actual fun Continuation.intercepted(): Continuation =
(this as? ContinuationImpl)?.intercepted() ?: thisinternal abstract class ContinuationImpl {// ...public fun intercepted(): Continuation =
intercepted
?: (context[ContinuationInterceptor]?.interceptContinuation(this) ?: this)
.also { intercepted = it }
}
编译器会将 suspend 函数转成一个 Continuation,这个 Continuation 就是 ContinuationImpl;所以最终执行 interceptContinuation,如果 context 里有 ContinuationInterceptor 的话。
作者:Jekton
链接:https://jekton.github.io/2020/03/31/kotlin-coroutine-dispatcher/
推荐阅读
(点击标题可跳转阅读)
教程篇:Fragment 使用陷阱
并发编程系列:面试官最想要的synchronized,你值得拥有
并发编程系列:写给大忙人看的进程和线程
Kotlin系列:Kotlin中的高阶函数
觉得本文对你有帮助?请分享给更多人
![727ef01ae4690b2da370a2154f4f829d.gif](https://img-blog.csdnimg.cn/img_convert/727ef01ae4690b2da370a2154f4f829d.gif)
![6eb9340c8dbde0973ff2fb1871c944b6.png](https://img-blog.csdnimg.cn/img_convert/6eb9340c8dbde0973ff2fb1871c944b6.png)
wx号:gulinhai531
顾林海公众号
不定期推出优质文
章,喜欢的朋友们
给我个好看。
好文章,我在看❤️