电子秤c语言编程,STC89C51单片机+HX711称重模块电子秤程序

#include "main.h"

#include "HX711.h"

#include "eeprom52.h"

#define uchar unsigned char

#define uint  unsigned int

unsigned long HX711_Buffer = 0;

unsigned long Weight_Maopi = 0;

unsigned long Weight_Maopi_0 = 0;

long Weight_Shiwu = 0;

unsigned int qupi=0;

unsigned char p=0;

//键盘处理变量

unsigned char keycode;

unsigned char key_press_num=0;

uint GapValue,GapValue1;

bit flag_cz=0;

uchar code  LEDData[]={0x5F,0x44,0x9D,0xD5,0xC6,0xD3,0xDB,0x47,0xDF,0xD7,0xCF,0xDA,0x9B,0xDC,0x9B,0x8B}; //数码管显示码表

//定义标识

volatile bit FlagTest = 0;                //定时测试标志，每0.5秒置位，测完清0

volatile bit FlagKeyPress = 0;  //有键按下标志，处理完毕清0

//校准参数

//因为不同的传感器特性曲线不是很一致，因此，每一个传感器需要矫正这里这个参数才能使测量值很准确。