matlab幅度调制滚动条的程序_matlab AM是指对信号进行幅度调制 联合开发网 - pudn.com...

matlab

所属分类：通讯编程

开发工具：matlab

文件大小：58KB

下载次数：1

上传日期：2018-12-14 10:00:43

上 传 者：塞阿斯

说明：  AM是指对信号进行幅度调制。幅度调制是正弦载波的幅度随调制信号作线性变化的过程。

AM调幅可以采用相干解调，将已调信号乘以载波后通过低通滤波器并在幅度上做一定调整即可以恢复出原来的调制信号。另外AM信号在满足1max()mtm??条件下，也可以采用包络检波法。包络检波器通常由整流器和低通滤波器组成。与相干解调不同的是，包络检波不需要幅度修正。 在对模拟信号进行调制解调程序中，先对输入参数做出判决，当输入个数少于所需个数时则运行默认的。然后对输入的幅度做出判断，以免出现过调幅。然后是调制解调。

(AM refers to the amplitude modulation of the signal. Amplitude modulation is a process in which the amplitude of sinusoidal carrier varies linearly with the modulated signal.

AM amplitude modulation can be demodulated coherently. After multiplying the modulated signal by carrier wave, the original modulated signal can be restored by low pass filter and adjusting the amplitude. In addition, the envelope detection method can also be used for AM signal under the condition of 1 Max () MTM condyle. Envelope detector is usually composed of rectifier and low pass filter. Unlike coherent demodulation, envelope detection does not require amplitude correction. In the process of modulation and demodulation of analog signals, the input parameters are judged first, and the default is run when the number of inputs is less than the required number. Then the input amplitude is judged to avoid excessive amplitude modulation. Then there's the modem.)

文件列表：[举报垃圾]

matlab.mat, 60555 , 2018-12-14

近期下载者：

相关文件：

收藏者：