hp linux 磁盘阵列,扩展运行Linux的RAID 1(HP SmartArray P410i)

我使用以下运行Ubuntu 11.10(内核3.0.0-12-服务器x86_64)的RAID 1配置接管了一个相当简单的服务器设置:

=> ctrl all show config

Smart Array P410i in Slot 0 (Embedded) (sn: removed)

array A (SAS, Unused Space: 1335535 MB)

logicaldrive 1 (279.4 GB, RAID 1, OK)

physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK)

physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK)

最初有两个300GB磁盘被1TB磁盘取代,我现在必须扩展逻辑卷以使用额外的空间.

但是,在尝试这样做时,我收到以下警告:

=> ctrl slot=0 ld 1 modify size=max

Warning: Extension may not be supported on certain operating systems.

Performing extension on these operating systems can cause data to

become inaccessible. See ACU documentation for details. Continue?

(y/n)

说是或者我是否有可能破坏文件系统/丢失数据?之后重新排列和扩展文件系统应该不是问题,因为我可以使服务器脱机并从gparted live disk启动.

这是使用中的RAID控制器的配置:

=> ctrl all show detail

Smart Array P410i in Slot 0 (Embedded)

Bus Interface: PCI

Slot: 0

Serial Number: removed

RAID 6 (ADG) Status: Disabled

Controller Status: OK

Hardware Revision: Rev C

Firmware Version: 5.12

Rebuild Priority: Medium

Expand Priority: Medium

Surface Scan Delay: 15 secs

Surface Scan Mode: Idle

Wait for Cache Room: Disabled

Surface Analysis Inconsistency Notification: Disabled

Post Prompt Timeout: 0 secs

Cache Board Present: False

Drive Write Cache: Disabled

SATA NCQ Supported: True

和分区表:

Number Start End Size Type File system Flags

1 1049kB 274GB 274GB primary ext4 boot

2 274GB 300GB 25.8GB extended

5 274GB 300GB 25.8GB logical linux-swap(v1)

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值