DDR version 1.06 20170424
In
DDR4
786MHz
Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
ddrconfig:19
OUT
Boot1 Release Time: 2017-05-18, version: 2.43
ChipType = 0x11, 178
emmc reinit
emmc reinit
SdmmcInit=2 400
SdmmcInit=0 0
BootCapSize=0
UserCapSize=7620MB
FwPartOffset=2000 , 0
StorageInit ok = 45111
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa3810
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):f947c7e
NOTICE: BL31: Built : 09:28:45, May 31 2017
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-gc58a8168bd (Sep 14 2018 - 00:04:33 +0800)
Model: Firefly ROC-RK3328-CC
DRAM: 2 GiB
MMC: rksdmmc@ff520000: 0, rksdmmc@ff500000: 1
*** Warning - bad CRC, using default environment
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Firefly ROC-RK3328-CC
misc_init_r
cpuid=55524b50303130313400000000013018
serial=728d2f5a6dc6f12
roc-rk3328-cc late init ...
Net: No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
mmc_init: -95, time 2009
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:4...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
180 bytes read in 4 ms (43.9 KiB/s)
1: kernel-4.4
Retrieving file: /Image
reading /Image
16640008 bytes read in 777 ms (20.4 MiB/s)
append: earlycon=uart8250,mmio32,0xff130000 rw root=PARTUUID=b921b045-1d rootwait rootfstype=ext4 init=/sbin/init
Retrieving file: /rk3328-roc-cc.dtb
reading /rk3328-roc-cc.dtb
58477 bytes read in 8 ms (7 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 000000007def0000, end 000000007df0146c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.114 (topillar@topillar-virtual-machine) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Fri Sep 14 00:16:42 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff130000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07ff3e000 s45800 r8192 d32024 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592
[ 0.000000] Kernel command line: rockchip_jtag earlyprintk=uart8250-32bit,0xff130000 earlycon=uart8250,mmio32,0xff130000 rw root=PARTUUID=b921b045-1d rootwait rootfstype=ext4 init=/sbin/init
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB [mem 0x79800000-0x7d800000] (64MB) mapped at [ffffffc079800000-ffffffc07d7fffff]
[ 0.000000] Memory: 1975476K/2095104K available (9982K kernel code, 1402K rwdata, 3760K rodata, 1088K init, 693K bss, 119628K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8008df0000 - 0xffffff8008f00000 ( 1088 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008a40000 ( 9984 KB)
[ 0.000000] .rodata : 0xffffff8008a40000 - 0xffffff8008df0000 ( 3776 KB)
[ 0.000000] .data : 0xffffff8008f00000 - 0xffffff800905e808 ( 1403 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001887] Console: colour dummy device 80x25
[ 0.002303] console [tty0] enabled
[ 0.002632] bootconsole [uart0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.114 (topillar@topillar-virtual-machine) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Fri Sep 14 00:16:42 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff130000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07ff3e000 s45800 r8192 d32024 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592
[ 0.000000] Kernel command line: rockchip_jtag earlyprintk=uart8250-32bit,0xff130000 earlycon=uart8250,mmio32,0xff130000 rw root=PARTUUID=b921b045-1d rootwait rootfstype=ext4 init=/sbin/init
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB [mem 0x79800000-0x7d800000] (64MB) mapped at [ffffffc079800000-ffffffc07d7fffff]
[ 0.000000] Memory: 1975476K/2095104K available (9982K kernel code, 1402K rwdata, 3760K rodata, 1088K init, 693K bss, 119628K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8008df0000 - 0xffffff8008f00000 ( 1088 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008a40000 ( 9984 KB)
[ 0.000000] .rodata : 0xffffff8008a40000 - 0xffffff8008df0000 ( 3776 KB)
[ 0.000000] .data : 0xffffff8008f00000 - 0xffffff800905e808 ( 1403 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001887] Console: colour dummy device 80x25
[ 0.002303] console [tty0] enabled
[ 0.002632] bootconsole [uart0] disabled
[ 0.003041] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003084] pid_max: default: 32768 minimum: 301
[ 0.003299] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.003327] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.004418] Initializing cgroup subsys devices
[ 0.004458] Initializing cgroup subsys freezer
[ 0.004510] ftrace: allocating 37189 entries in 146 pages
[ 0.123673] sched-energy: CPU device node has no sched-energy-costs
[ 0.123722] Invalid sched_group_energy for CPU0
[ 0.123743] CPU0: update cpu_capacity 1024
[ 0.123827] ASID allocator initialised with 32768 entries
[ 0.130117] Detected VIPT I-cache on CPU1
[ 0.130196] Invalid sched_group_energy for CPU1
[ 0.130202] CPU1: update cpu_capacity 1024
[ 0.130208] CPU1: Booted secondary processor [410fd034]
[ 0.131013] Detected VIPT I-cache on CPU2
[ 0.131076] Invalid sched_group_energy for CPU2
[ 0.131082] CPU2: update cpu_capacity 1024
[ 0.131087] CPU2: Booted secondary processor [410fd034]
[ 0.131886] Detected VIPT I-cache on CPU3
[ 0.131943] Invalid sched_group_energy for CPU3
[ 0.131949] CPU3: update cpu_capacity 1024
[ 0.131953] CPU3: Booted secondary processor [410fd034]
[ 0.132080] Brought up 4 CPUs
[ 0.132330] SMP: Total of 4 processors activated.
[ 0.132388] CPU: All CPU(s) started at EL2
[ 0.132471] alternatives: patching kernel code
[ 0.132838] Invalid sched_group_energy for CPU3
[ 0.132889] Invalid sched_group_energy for Cluster3
[ 0.132932] Invalid sched_group_energy for CPU2
[ 0.132977] Invalid sched_group_energy for Cluster2
[ 0.133020] Invalid sched_group_energy for CPU1
[ 0.133060] Invalid sched_group_energy for Cluster1
[ 0.133111] Invalid sched_group_energy for CPU0
[ 0.133151] Invalid sched_group_energy for Clus