排序算法
排序算法中包括:简单排序、高级排序
简单排序
简单排序常用的有:冒泡排序、选择排序、插入排序
冒泡排序代码如下:
1 private static void bubbleSrot(int[] arr) {2
3 for (int i = 0; i < arr.length - 1; i++) {4
5 for (int j = i + 1; j < arr.length; j++) {6
7 if (arr[i] >arr[j]) {8
9 int temp =arr[i];10
11 arr[i] =arr[j];12
13 arr[j] =temp;14
15 }16
17 }18
19 }20
21 }
冒泡排序方法速度是很慢的,运行时间为O(N²)级。选择排序改进了冒泡排序,将必要的交换次数从O(N²)减少到O(N),不幸的是比较次数依然是O(N²)级。然而,选择排序依然为大记录量的排序提出了一个非常重要的改进,因为这些大量的记录需要在内存中移动,这就使交换的时间和比较的时间相比起来,交换的时间更为重要。
---------------------
选择排序代码如下:
1 private static void chooseSort(int[] arr) {2
3 for (int i = 0; i < arr.length; i++) {4
5 int least =i;6
7 for (int j = i + 1; j < arr.length; j++) {8
9 if (arr[j]
11 least =j;12
13 }14
15 }16
17 //将当前第一个元素与它后面序列中的最小的一个 元素交换,也就是将最小的元素放在最前端
18
19 int temp =arr[i];20
21 arr[i] =arr[least];22
23 arr[least] =temp;24
25 }26
27 }
选择排序的效率:选择排序和冒泡排序执行了相同次数的比较:N*(N-1)/2。对于10个数据项,需要45次比较,然而,10个数据项只需要少于10次的交换。对于100个数据项,需要4950次比较,但只进行不到100次交换。N值很大时,比较的次数是主要的,所以结论是选择排序和冒泡哦排序一样运行了O(N²)时间。但是,选择排序无疑更快,因为它进行的交换少得多。
---------------------
插入排序代码如下:
1 private static void insertionSort(int[] arr) {2
3 intin, out;4
5 for (out = 1; out < arr.length; out++) {6
7 int temp =arr[out];8
9 in =out;10
11 while (in > 0 && arr[in - 1] >=temp) {12
13 arr[in] = arr[in - 1];14
15 --in;16
17 }18
19 arr[in] =temp;20
21 }22
23 }
插入排序的效率:这个算法中,第一趟排序,最多比较一次,第二趟排序,最多比较两次,以此类推,最后一趟最多比较N-1次,因此有1+2+3+…+N-1 = N*(N-1)/2。然而,因为在每一趟排序发现插入点之前,平均只有全体数据项的一半真的进行了比较,所以除以2最后是N*(N-1)/4。
对于随机顺序的数据,插入排序也需要O(N²)的时间级。当数据基本有序,插入排序几乎只需要O(N)的时间,这对把一个基本有序的文件进行排序是一个简单而有效的方法。
对于逆序排列的数据,每次比较和移动都会执行,所以插入排序不比冒泡排序快。
---------------------
归并排序
1 //将两个已排序的数组合并到第三个数组上。
2
3 private static void merge(int[] arrA, int[] arrB, int[] arrC) {4
5 int aDex = 0, bDex = 0, cDex = 0;6
7 int sizeA =arrA.length;8
9 int sizeB =arrB.length;10
11
12 //A数组和B数组都不为空
13
14 while (aDex < sizeA && bDex
16 if (arrA[aDex]
18 arrC[cDex++] = arrA[aDex++];19
20 } else{21
22 arrC[cDex++] = arrB[bDex++];23
24 }25
26 }27
28 //A数组不为空,B数组为空
29
30 while (aDex
32 arrC[cDex++] = arrA[aDex++];33
34 }35
36 //A数组为空,B数组不为空
37
38 while (bDex
40 arrC[cDex++] = arrB[bDex++];41
42 }43
44 }
高级排序
常见的高级排序:哈希排序、快速排序,这两种排序算法都比简单排序算法快得多:希尔排序大约需要O(N*(logN)²)时间,快速排序需要O(N*logN)时间。这两种排序算法都和归并排序不同,不需要大量的辅助存储空间。希尔排序几乎和归并排序一样容易实现,而快速排序是所有通用排序算法中最快的一种排序算法。 还有一种基数排序,是一种不常用但很有趣的排序算法。
哈希排序
哈希排序是基于插入排序的,实现代码如下:
1 private static void shellSort(int[] arr) {2
3 intinner, outer;4
5 inttemp;6
7 int h = 1;8
9 int nElem =arr.length;10
11 while (h <= nElem / 3) {12
13 h = h * 3 + 1;14
15 }16
17 while (h > 0) {18
19 for (outer = h; outer < nElem; outer++) {20
21 temp =arr[outer];22
23 inner =outer;24
25 while (inner > h - 1 && arr[inner - h] >=temp) {26
27 arr[inner] = arr[inner -h];28
29 inner -=h;30
31 }32
33 arr[inner] =temp;34
35 }36
37 h = (h - 1) / 3;38
39 }40
41 }42 ---------------------
快速排序
快速排序是最流行的排序算法,在大多数情况下,快速排序都是最快的,执行时间是O(N*logN)级,划分是快速排序的根本机制。划分本身也是一个有用的操作。 划分数据就是把数据分为两组,使所有关键字大于特定值的数据项在一组,所有关键字小于特定值的数据项在另一组。代码实现如下:
1 //快速排序
2
3 private static void recQuickSort(int arr[], int left, intright) {4
5 if (right - left <= 0) {6
7 return;8
9 } else{10
11 int pivot = arr[right];//一般使用数组最右边的元素作为枢纽
12
13 int partition =partitionIt(arr, left, right, pivot);14
15 recQuickSort(arr, left, partition - 1);16
17 recQuickSort(arr, partition + 1, right);18
19 }20
21 }22
23
24 //划分
25
26 private static int partitionIt(int[] arr, int left, int right, intpivot) {27
28 int leftPtr = left - 1;29
30 //int rightPtr = right + 1;
31
32 int rightPtr = right; //使用最右边的元素作为枢纽,划分时就要将最右端的数据项排除在外
33
34 while (true) {35
36 while (arr[++leftPtr]
38 ;39
40 while (rightPtr > 0 && arr[--rightPtr] >pivot)41
42 ;43
44
45 if (leftPtr >=rightPtr) {46
47 break;48
49 } else{50
51 //交换leftPtr和rightPtr位置的元素
52
53 int temp =arr[leftPtr];54
55 arr[leftPtr] =arr[rightPtr];56
57 arr[rightPtr] =temp;58
59 }60
61 }62
63 //交换leftPtr和right位置的元素
64
65 int temp =arr[leftPtr];66
67 arr[leftPtr] =arr[right];68
69 arr[right] =temp;70
71 return leftPtr;//返回枢纽位置
72
73 }74 ---------------------
查找算法
对于有序的数组,常用的查找算法:二分查找。代码如下:
1 private static int find(int [] arr,intsearchKey){2
3 int lowerBound = 0;4
5 int upperBound = arr.length -1;6
7 intcurIn;8
9 while(lowerBound <=upperBound){10
11 curIn = (lowerBound + upperBound) / 2;12
13 if(arr[curIn] ==searchKey){14
15 returncurIn;16
17 }else{18
19 if(arr[curIn]
21 lowerBound = curIn + 1;22
23 }else{24
25 upperBound = curIn - 1;26
27 }28
29 }30
31 }32
33 return -1;34
35 }36 ---------------------