bootargs linux的 io scheduler,求助，有哪位大神能够看看我的机顶盒华为悦盒EC6108v9-pub......

Bootrom start

Boot from eMMC

Entry usb bootstrap

Recv CC:5crc err

Read fastboot.bin failed in host:1

No found fastboot.bin in host:2

Starting fastboot ...

System startup

DDRS

Reg Version:  v1.1.0

Reg Time:     2016/8/19  17:40:53

Reg Name:     hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Jump to DDR

Fastboot 3.3.0-00874-g6456240-dirty (root@HW-TV-S3) (Sep 26 2016 - 10:23:05)

Fastboot:      Version 3.3.0

Build Date:    Sep 26 2016, 10:24:48

CPU:           Hi3798Mv100

Boot Media:    eMMC

DDR Size:      1GB

Check nand flash controller v610. found

Special NAND id table Version 1.36

Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

No NAND device found!!!

MMC/SD controller initialization.

No MMC/SD card detect when read `SDIO_CARD_DETECT` pin.

Boot Env on eMMC

Env Offset:          0x00100000

Env Size:            0x00010000

Env Range:           0x00010000

HI_OTP_LockIdWord,327: ID_WORD have already been locked

start download process.

SDK Version: HiSTBAndroidV600R001C00SPC064_v2016060803

(Re)start USB...

USB0:   Register 1212 NbrPorts 2

USB EHCI 1.00

scanning bus 0 for devices... cannot reset port 1!?

1 USB Device(s) found

USB1:   Register 1111 NbrPorts 1

USB EHCI 1.00

scanning bus 1 for devices... 1 USB Device(s) found

scanning usb for storage devices... 0 Storage Device(s) found

NO Such file: bootargs.bin on usb device

get key value  0x0

HI_Flash_Read Ret= 3072

HI_Flash_Read Ret= 3072

HI_Flash_Read Ret= 10485760

HI_Flash_Read Ret= 10485760

******** boot from kernel...********

bootargs = coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastbo

ot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo)

,16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),340M(backup),340M

(cache),520M(system),-(userdata)HI_Flash_Read Ret= 512

HI_Flash_Read Ret= 512

Stb mac is : [84:21:F1:4B:4A:C4]

Reserve Memory

Start Addr:          0x3FFFE000

Bound Addr:          0x8D3D000

Free  Addr:          0x3EB9D000

Alloc Block:  Addr        Size

0x3FBFD000       4194304

0x3F8FC000       3145728

0x3F87B000       524288

0x3F878000       8192

0x3F843000       212992

0x3F742000       1048576

0x3F73E000       12288

0x3F3B9000       3686400

0x3F223000       1658880

0x3EE9E000       3686400

0x3EBA0000       3133440

0x3EB9D000       8192

Press Ctrl+C to stop autoboot

kernel  @ 3e08000 (7849216 bytes)

ramdisk @ 4e00000 (326153 bytes)

page size @ 2048 bytes

initrd rd_start = 4e00000,rd_end = 4e4fa09

## Booting kernel from Legacy Image at 01ffc7c0 ...

Image Name:   Linux-3.10.0_s40

Image Type:   ARM Linux Kernel Image (uncompressed)

Data Size:    7849152 Bytes = 7.5 MiB

Load Address: 02000000

Entry Point:  02000000

load:2000000,blob_start:1ffc7c0,blob_end:2778cc0,image_start:1ffc800,image_len:7

7c4c0

Loading Kernel Image ... OK

OK

kernel loaded at 0x02000000, end = 0x0277c4c0

images.os.start = 0x1FFC7C0, images.os.end = 0x2778cc0

images.os.load = 0x2000000, load_end = 0x277c4c0

ret -2

initrd rd_start = 4e00000,rd_end = 4e4fa09

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Booting Linux on physical CPU 0x0

Linux version 3.10.0_s40 (root@HW-TV-S3) (gcc version 4.4.1 (Hisilicon_v200(gcc4

.4-290+glibc-2.11+eabi+nptl)) ) #1 SMP Mon Sep 26 10:37:22 CST 2016

CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: bigfish

cma: CMA: reserved 400 MiB at 25800000

cma: CMA: reserved 4 MiB at 3fc00000

Memory policy: ECC disabled, Data cache writealloc

CPU: Hi3798Mv100

PERCPU: Embedded 8 pages/cpu @81a96000 s12224 r8192 d12352 u32768

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096

Kernel command line: coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0

:1M(fastboot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam

),4M(logo),16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),340M(ba

ckup),340M(cache),520M(system),-(userdata) mem=1G mmz=ddr,0,0,400M

PID hash table entries: 4096 (order: 2, 16384 bytes)

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 1024MB = 1024MB total

Memory: 599848K/599848k available, 448728k reserved, 0K highmem

Virtual kernel memory layout:

vector  : 0xffff0000 - 0xffff1000   (   4 kB)

fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

vmalloc : 0xc0800000 - 0xff000000   (1000 MB)

lowmem  : 0x80000000 - 0xc0000000   (1024 MB)

pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)

modules : 0x7f000000 - 0x7fe00000   (  14 MB)

.text : 0x80008000 - 0x80eea25c   (15241 kB)

.init : 0x80eeb000 - 0x80f5bfc0   ( 452 kB)

.data : 0x80f5c000 - 0x810a6d48   (1324 kB)

.bss : 0x810a6d48 - 0x8128f09c   (1953 kB)

SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

Hierarchical RCU implementation.

NR_IRQS:192

sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

Console: colour dummy device 80x30

Calibrating delay loop... 1949.69 BogoMIPS (lpj=974848)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

ftrace: allocating 33145 entries in 98 pages

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x80b2c8c8 - 0x80b2c920

CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

Brought up 4 CPUs

SMP: Total of 4 processors activated (7829.50 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

[111 ERROR-Invalid]:MCE_Init[2135]:ERR: get PDM Param

NET: Registered protocol family 16

DMA: preallocated 2048 KiB pool for atomic coherent allocations

hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 8 bytes.

Serial: AMBA PL011 UART driver

uart:0: ttyAMA0 at MMIO 0xf8b00000 (irq = 81) is a PL011 rev2

console [ttyAMA0] enabled

uart:1: ttyAMA1 at MMIO 0xf8006000 (irq = 82) is a PL011 rev2

uart:2: ttyAMA2 at MMIO 0xf8b02000 (irq = 83) is a PL011 rev2

bio: create slab at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Linux video capture interface: v2.00

Advanced Linux Sound Architecture Driver Initialized.

Bluetooth: Core ver 2.16

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

Switching to clocksource timer3

NET: Registered protocol family 2

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP: reno registered

UDP hash table entries: 512 (order: 2, 16384 bytes)

UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

Trying to unpack rootfs image as initramfs...

Freeing initrd memory: 316K (84e00000 - 84e4f000)

NetWinder Floating Point Emulator V0.97 (double precision)

CPU PMU: probing PMU on CPU 0

hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available

VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

squashfs: version 4.0 (2009/01/31) Phillip Lougher

jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

fuse init (API version 7.22)

msgmni has been set to 1980

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered

io scheduler deadline registered (default)

io scheduler cfq registered

brd: module loaded

loop: module loaded

input: Hi keyboard as /devices/virtual/input/input0

input: Hi mouse as /devices/virtual/input/input1

input: qwerty as /devices/virtual/input/input2

Hi Android vinput driver init successful!

Found Nand Flash Controller V610.

Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

No NAND device found

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky

libphy: himii: probed

Up port phy at 0x01 is connect

libphy: PHY himii:1f not found

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP Deflate Compression module registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

usbotg: usb otg driver registeredusbcore: registered new interface driver cdc_wd

m

usbcore: registered new interface driver usb-storage

usbcore: registered new interface driver usbserial

usbcore: registered new interface driver option

usbserial: USB Serial support registered for GSM modem (1-port)

dwc_otg: version 3.00a 10-AUG-2012

Core Release: 3.10a

Setting default values for core params

Using Buffer DMA mode

Dedicated Tx FIFOs mode

g_ffs: file system registered

mousedev: PS/2 mouse device common for all mice

usbcore: registered new interface driver uvcvideo

USB Video Class driver (1.1.1)

device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com

mmc0: BKOPS_EN bit is not set

mmc0: new high speed DDR MMC card at address 0001

mmcblk0: mmc0:0001 H8G4a 7.28 GiB

mmcblk0boot0: mmc0:0001 H8G4a partition 1 4.00 MiB

mmcblk0boot1: mmc0:0001 H8G4a partition 2 4.00 MiB

mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(deviceinfo) p5(baseparam) p6

(pqparam) p7(logo) p8(fastplay) p9(misc) p10(factory) p11(kernel) p12(iptv_data)

p13(backup) p14(cache) p15(system) p16(userdata)

mmcblk0boot1: unknown partition table

mmcblk0boot0: unknown partition table

hi_mci0: eMMC/MMC/SD Device NOT detected!

hidraw: raw HID events driver (C) Jiri Kosina

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

zram: Created 1 device(s) ...

ashmem: initialized

logger: created 256K log 'log_main'

logger: created 256K log 'log_events'

logger: created 256K log 'log_radio'

logger: created 256K log 'log_system'

Mali: Mali device driver loaded

usbcore: registered new interface driver snd-usb-audio

oprofile: using timer interrupt.

GACT probability on

Mirror/redirect action on

Failed to load ipt action

Simple TC action Loaded

netem: version 1.3

u32 classifier

Performance counters on

input device check on

Actions configured

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (15841 buckets, 63364 max)

ctnetlink v0.93: registering with nfnetlink.

NF_TPROXY: Transparent proxy support initialized, version 4.1.0

NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

xt_time: kernel timezone is -0000

IPVS: Registered protocols ()

IPVS: Connection hash table configured (size=4096, memory=32Kbytes)

IPVS: Creating netns size=776 id=0

IPVS: ipvs loaded.

ip_tables: (C) 2000-2006 Netfilter Core Team

ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully

arp_tables: (C) 2002 David S. Miller

TCP: cubic registered

NET: Registered protocol family 10

ip6_tables: (C) 2000-2006 Netfilter Core Team

NET: Registered protocol family 17

Bridge firewalling registered

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM ver 1.11

Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Bluetooth: BNEP filters: protocol multicast

Bluetooth: BNEP socket layer initialized

Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Bluetooth: HIDP socket layer initialized

8021q: 802.1Q VLAN Support v1.8

lib80211: common routines for IEEE802.11 drivers

VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5

Load hi_tde.ko success.         (SDK_VERSION:[HiSTBAndroidV600R001C00SPC064_v201

6060803] Build Time:[Sep 26 2016, 10:36:35])

Load hi_fb.ko success.  (SDK_VERSION:[HiSTBAndroidV600R001C00SPC064_v2016060803]

Build Time:[Sep 26 2016, 10:36:12])

DieID is locked!

hisi-sndcard hisi-sndcard:  aiao-hifi hisi-i2s mapping ok

Load hi_png.ko success.         (SDK_VERSION:[HiSTBAndroidV600R001C00SPC064_v201

6060803] Build Time:[Sep 26 2016, 10:36:28])

Load hi_jpegenc.ko success.     (SDK_VERSION:[HiSTBAndroidV600R001C00SPC064_v201

6060803] Build Time:[Sep 26 2016, 10:36:19])

enter temperature_control_thread

ALSA device list:

#0: HISI-AIAO

Freeing unused kernel memory: 448K (80eeb000 - 80f5b000)

init: /init.bigfish.rc: 94: invalid option 'sdcard_r'

init: could not import file '/init.thirdos.rc' from '/init.rc'

init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instea

d.

init: /dev/hw_random not found

init: cannot open '/initlogo.rle'

EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)

init: init: /system/bin/e2fsck

init: init: -v

init: init: -f

init: init: -y

init: init: /dev/block/mmcblk0p16

init: init: result is 2048

EXT4-fs (mmcblk0p16): VFS: Can't find ext4 filesystem

EXT4-fs (mmcblk0p14): recovery complete

EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)

init: /dev/hw_random not found

init: Unable to open persistent property directory /data/property errno: 2

init: Unable to write persistent property to temp file /data/property/.temp.jJ2q

ud errno: 2

init: Unable to write persistent property to temp file /data/property/.temp.J5qx

Qv errno: 2

init: Unable to write persistent property to temp file /data/property/.temp.7t8C

3A errno: 2

init: cannot find '/system/bin/rild', disabling 'ril-daemon'

healthd: No charger supplies found

healthd: BatteryStatusPath not found

healthd: BatteryHealthPath not found

healthd: BatteryPresentPath not found

healthd: BatteryCapacityPath not found

healthd: BatteryVoltagePath not found

healthd: BatteryTemperaturePath not found

healthd: BatteryTechnologyPath not found

binder: 1394:1394 transaction failed 29189, size 0-0

init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'

init: cannot find '/system/bin/basicService', disabling 'basicService'

init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'

init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'

init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'

init: powerctl: cannot expand '${sys.powerctl}'

init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s

ys.sysctl.extra_free_kbytes}'

init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy

s/vm/extra_free_kbytes'

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

hiusb-ehci hiusb-ehci.0: HIUSB EHCI

hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1

hiusb-ehci hiusb-ehci.0: irq 98, io mem 0xf9890000

hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

hiusb-ehci hiusb-ehci.1: HIUSB EHCI

hiusb-ehci hiusb-ehci.1: new USB bus registered, assigned bus number 2

hiusb-ehci hiusb-ehci.1: irq 94, io mem 0xf9930000

hiusb-ehci hiusb-ehci.1: USB 0.0 started, EHCI 1.00

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

都到IPV6了，还是会卡在开机画面。请哪位大仙给看看，是哪个文件出了问题。我的机子是华为悦盒EC6108v9-pub