time limit per test1 second
memory limit per test512 megabytes
inputstandard input
outputstandard output
Oleg writes down the history of the days he lived. For each day he decides if it was good or bad. Oleg calls a non-empty sequence of days a zebra, if it starts with a bad day, ends with a bad day, and good and bad days are alternating in it. Let us denote bad days as 0 and good days as 1. Then, for example, sequences of days 0, 010, 01010 are zebras, while sequences 1, 0110, 0101 are not.
Oleg tells you the story of days he lived in chronological order in form of string consisting of 0 and 1. Now you are interested if it is possible to divide Oleg’s life history into several subsequences, each of which is a zebra, and the way it can be done. Each day must belong to exactly one of the subsequences. For each of the subsequences, days forming it must be ordered chronologically. Note that subsequence does not have to be a group of consecutive days.
Input
In the only line of input data there is a non-empty string s consisting of characters 0 and 1, which describes the history of Oleg’s life. Its length (denoted as |s|) does not exceed 200 000 characters.
Output
If there is a way to divide history into zebra subsequences, in the first line of output you should print an integer k (1 ≤ k ≤ |s|), the resulting number of subsequences. In the i-th of following k lines first print the integer li (1 ≤ li ≤ |s|), which is the length of the i-th subsequence, and then li indices of days forming the subsequence. Indices must follow in ascending order. Days are numbered starting from 1. Each index from 1 to n must belong to exactly one subsequence. If there is no way to divide day history into zebra subsequences, print -1.
Subsequences may be printed in any order. If there are several solutions, you may print any of them. You do not have to minimize nor maximize the value of k.
Examples
inputCopy
0010100
output
3
3 1 3 4
3 2 5 6
1 7
inputCopy
111
output
-1
看了别人的博客后才知道这道题要用vector容器来做,不然开辟的内存会爆掉,同时也让我知道了vector的基础用法
{
#include头文件
vector a;相当于定义了一个大小可变的a数组
a.size();a内元素的数量
a.begin();数组a的起始位置
a.end();数组a的最后一个元素的位置+1
a.push_back(i);将i放入数组a的末尾
a.pop_back();删除a末尾的元素
a.clear();清空数组a;
a.erase(vec.begin()+5);删除第6个元素
a.insert(a.begin()+c,b)在第c个插入b
a.insert(a.begin()+i,b);在第i+1个元素前面插入b
a.empty();a数组如果为空输出1,非空输出0
sort(a.begin(),a.end())//升序排序
cout<
vector::iterator it;迭代器:一个元素指向下一个元素
例:for(it=a.begin();it!=a.end();it++)
cout<
reverse(a.begin(),a.end());将整个a倒置
}
别的大牛对vector的介绍
{
在c++中,vector是一个十分有用的容器。
作用:它能够像容器一样存放各种类型的对象,简单地说,vector是一个能够存放任意类型的动态数组,能够增加和压缩数据。
vector在C++标准模板库中的部分内容,它是一个多功能的,能够操作多种数据结构和算法的模板类和函数库。
特别注意:
使用vector需要注意以下几点:
1、如果你要表示的向量长度较长(需要为向量内部保存很多数),容易导致内存泄漏,而且效率会很低;
2、Vector作为函数的参数或者返回值时,需要注意它的写法:
double Distance(vector&a, vector&b) 其中的“&”绝对不能少!!!
使用sort排序:需要头文件#include,
sort(vec.begin(),vec.end());(默认是按升序排列,即从小到大).
可以通过重写排序比较函数按照降序比较,如下:
定义排序比较函数:
bool Comp(const int &a,const int &b)
{
return a>b;
}
调用时:sort(vec.begin(),vec.end(),Comp),这样就降序排序。
}
顺带与容器的简单使用方法
{
queue a
a.push(b) 尾部插入b
a.front 第一个元素
a.pop 删除第一个元素
队列:早进早出
stack a
a.push(b) 头部插入b
a.top() 最后一个元素
a.pop() 删除最后一个元素
栈:早进晚出
}
大概思路:设两个数组,v1和v0,用来存放数组中以1结尾和以0结尾的数组序号
每次读取一个字符,如果是0,则查看v1是否有以1结尾的数组,优先放在那个1后面;否则就重新开辟一个新的答案数组。如果是1,则查看v0是否有以0结尾的数组,如果没有,则不满足题意,否则放在以0结尾的那个数组里 .
如果想读入的时候直接从1开始 那么可以scanf(“%s”,s+1); 需要注意:int len = strlen(s+1)而不是strlen(s)
求长度 string s->s.length()或s.size() .
string a 只能用cin>>s读入
代码:
#include
#include
#include
using namespace std;
vector v0;
vector v1;
vector ans[200050];
int main()
{
string s;
cin>>s;
int len=s.length();
//cout<
int i,j,sum;
int lg=1;//标记是否满足题意
sum=0;//记录有多少数组
for(i=0;i
{
s[i]=s[i]-'0';//将字符转换为数字
if(s[i]==0)
{
//cout<
if(v1.size()==0)//要开辟新数组
{
v0.push_back(sum);//压入的是数组序号
ans[sum++].push_back(i);//记录位置
}
else
{
int last=v1[v1.size()-1];
v1.pop_back();
v0.push_back(last);
ans[last].push_back(i);
}
//cout<
}
else if(s[i]==1)
{
//cout<
if(v0.size()==0)//1没有0可以接,不满足题意
lg=0;
else
{
int last=v0[v0.size()-1];
v0.pop_back();
v1.push_back(last);
ans[last].push_back(i);
}
}
}
if(lg&&v1.size()==0)
{
cout<
for(i=0;i
{
int sz=ans[i].size();
cout<
for(j=0;j
cout<
cout<
}
}
else
cout<
return 0;
}