linux双网卡绑定后io慢,使用bonding技术实现双网卡绑定

使用bonding技术实现双网卡绑定

1、两块网卡绑定一个虚拟网卡

2、Linux的内核默认是否已经支持了，可以通过 modinfo bonding 来查看

[root@sxs ~]# modinfo bonding

filename:       /lib/modules/2.6.18-92.el5/kernel/drivers/net/bonding/bonding.ko

author:         Thomas Davis, tadavis@lbl.gov and many others

description:    Ethernet Channel Bonding Driver, v3.2.4

version:        3.2.4

license:        GPL

srcversion:     DB2ABCD47A83F8567EBE92B

depends:

vermagic:       2.6.18-92.el5 SMP mod_unload gcc-4.1

parm:           max_bonds:Max number of bonded devices (int)

parm:           miimon:Link check interval in milliseconds (int)

parm:           updelay:Delay before considering link up, in milliseconds (int)

parm:           downdelay:Delay before considering link down, in milliseconds (int)

parm:           use_carrier:Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default) (int)

parm:           mode:Mode of operation : 0 for balance-rr, 1 for active-backup, 2 for balance-xor, 3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, 6 for balance-alb (charp)

parm:           primary:Primary network device to use (charp)

parm:           lacp_rate:LACPDU tx rate to request from 802.3ad partner (slow/fast) (charp)

parm:           xmit_hash_policy:XOR hashing method: 0 for layer 2 (default), 1 for layer 3+4 (charp)

parm:           arp_interval:arp interval in milliseconds (int)

parm:           arp_ip_target:arp targets in n.n.n.n form. (array of charp)

parm:           arp_validate:validate src/dst of ARP probes: none (default), active, backup or all (charp)

parm:           fail_over_mac:For active-backup, do not set all slaves to the same MAC.  0 of off (default), 1 for on. (int)

module_sig:     883f35048175a9e6e24e25c96667c37112449509f5739ebf283efa5295d315b73cee5e956f6e25709cbcf2826571c5ffc20f2d87672bb921d610d7

[root@sxs ~]#

3、vi /etc/sysconfig/network-scripts/ifcfg-bond0   加入以下：

DEVICE=bond0

NETWORK=172.25.0.0

IPADDR=172.25.7.202

NETMASK=255.255.248.0

BROADCAST=172.25.7.255

NBOOT=yes

BOOTPROTO=none

USERCTL=no

GATEWAY=172.25.0.254

TYPE=Ethernet

4、vi /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0

USERCTL=no

ONBOOT=yes

MASTER=bond0

SLAVE=yes

BOOTPROTO=none

5、vi /etc/sysconfig/network-scripts/ifcfg-eth1

DEVICE=eth1

USERCTL=no

ONBOOT=yes

MASTER=bond0

SLAVE=yes

BOOTPROTO=none

6、vi /etc/modprobe.conf

加入两行

alias bond0 bonding

options bond0 miimon=100 mode=1

参数miimon是链路监测。miimon=100，表示系统每100ms监测一次链路连接状态，如果有一条线路不通就

转入另一条线路。

参数mode表示工作模式。

mode=0表示load balancing两块网卡同时工作，提供负载均衡。

mode=1表示fault-tolerance提供冗余功能，工作方式是主备的工作方式,提供高可用。

配置完毕后重启机器，启动过程中show details可以看到bonding启动成功。

4.察看bonding运行状态

[root@sxs ~]# ifconfig

bond0     Link encap:Ethernet  HWaddr 00:0C:29:2A:C7:AE

inet addr:172.25.7.202  Bcast:172.25.7.255  Mask:255.255.248.0

inet6 addr: fe80::20c:29ff:fe2a:c7ae/64 Scope:Link

UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1

RX packets:34751 errors:0 dropped:0 overruns:0 frame.:0

TX packets:1319 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:2405136 (2.2 MiB)  TX bytes:187511 (183.1 KiB)

eth0      Link encap:Ethernet  HWaddr 00:0C:29:2A:C7:AE

inet6 addr: fe80::20c:29ff:fe2a:c7ae/64 Scope:Link

UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1

RX packets:16413 errors:0 dropped:0 overruns:0 frame.:0

TX packets:776 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1132290 (1.0 MiB)  TX bytes:109473 (106.9 KiB)

Base address:0x2000 Memory:d8920000-d8940000

eth1      Link encap:Ethernet  HWaddr 00:0C:29:2A:C7:AE

inet6 addr: fe80::20c:29ff:fe2a:c7ae/64 Scope:Link

UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1

RX packets:18338 errors:0 dropped:0 overruns:0 frame.:0

TX packets:543 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1272846 (1.2 MiB)  TX bytes:78038 (76.2 KiB)

Base address:0x2040 Memory:d8940000-d8960000

lo        Link encap:Local Loopback

inet addr:127.0.0.1  Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING  MTU:16436  Metric:1

RX packets:3158 errors:0 dropped:0 overruns:0 frame.:0

TX packets:3158 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:265840 (259.6 KiB)  TX bytes:265840 (259.6 KiB)

[root@sxs ~]# cat /proc/net/bonding/bond0

Ethernet Channel Bonding Driver: v3.2.4 (January 28, 2008)

Bonding Mode: fault-tolerance (active-backup)

Primary Slave: None

Currently Active Slave: eth1

MII Status: up

MII Polling Interval (ms): 100

Up Delay (ms): 0

Down Delay (ms): 0

Slave Interface: eth1

MII Status: up

Link Failure Count: 0

Permanent HW addr: 00:0c:29:2a:c7:b8

Slave Interface: eth0

MII Status: up

Link Failure Count: 0

Permanent HW addr: 00:0c:29:2a:c7:ae

[root@sxs ~]#

随便拔一个网口的网线，不会有掉包的情况

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/7685986/viewspace-716758/，如需转载，请注明出处，否则将追究法律责任。