R1配置:
interface Ethernet0/0/0
ip address 221.1.1.2 255.255.255.0
#
interface Ethernet0/0/1
ip address 222.1.1.2 255.255.255.0
#
interface LoopBack0
ip address 8.8.8.8 255.255.255.0
#
ospf 1 router-id 8.8.8.8
area 0.0.0.0
network 221.1.1.0 0.0.0.255
network 222.1.1.0 0.0.0.255
network 8.8.8.0 0.0.0.255
核心CORE1配置:
#
sysname CORE1
#
undo info-center enable
#
vlan batch 10 20 30 200
#
interface Vlanif10
ip address 192.168.10.254 255.255.255.0
vrrp vrid 1 virtual-ip 192.168.10.1
vrrp vrid 1 priority 105
vrrp vrid 1 track interface GigabitEthernet0/0/2
#
interface Vlanif20
ip address 192.168.20.254 255.255.255.0
vrrp vrid 2 virtual-ip 192.168.20.1
vrrp vrid 2 priority 95
vrrp vrid 2 track interface GigabitEthernet0/0/2
#
interface Vlanif30
ip address 192.168.30.254 255.255.255.0
vrrp vrid 3 virtual-ip 192.168.30.1
vrrp vrid 3 priority 105
vrrp vrid 3 track interface GigabitEthernet0/0/2
#
interface Vlanif200
ip address 221.1.1.1 255.255.255.0
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 200
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
ospf 1 router-id 221.1.1.1
area 0.0.0.0
network 221.1.1.0 0.0.0.255
network 192.168.0.0 0.0.255.255
network 192.168.10.0 0.0.0.255
network 192.168.20.0 0.0.0.255
network 192.168.30.0 0.0.0.255
查看CORE1VRRP配置:
disp vrrp b
VRID State Interface Type Virtual IP
----------------------------------------------------------------
1 Master Vlanif10 Normal 192.168.10.1
2 Backup Vlanif20 Normal 192.168.20