linux asm 裸设备,ASM+裸设备

一 映射原始磁盘为裸设备

1.添加硬件磁盘并分区，结果如下：

[root@rac1 ~]# fdisk -l

Disk /dev/sda: 16.1 GB, 16106127360 bytes

255 heads, 63 sectors/track, 1958 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot      Start         End      Blocks   Id System

/dev/sda1   *           1        1827    14675346   83 Linux

/dev/sda2            1828        1958     1052257+ 82 Linux swap

Disk /dev/sdb: 5368 MB, 5368709120 bytes

255 heads, 63 sectors/track, 652 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot      Start         End      Blocks   Id System

/dev/sdb1               1         652     5237158+ 83 Linux

Disk /dev/sdc: 5368 MB, 5368709120 bytes

255 heads, 63 sectors/track, 652 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot      Start         End      Blocks   Id System

/dev/sdc1               1         652     5237158+ 83 Linux

Disk /dev/sdd: 3221 MB, 3221225472 bytes

255 heads, 63 sectors/track, 391 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot      Start         End      Blocks   Id System

/dev/sdd1               1         391     3140676   83 Linux

其中 /dev/sdb、/dev/sdc、/dev/sdd 做数据磁盘。

二 创建裸设备

1. 将以下条目添加到 /etc/sysconfig/rawdevices

/dev/raw/raw1 /dev/sdb1

/dev/raw/raw2 /dev/sdc1

/dev/raw/raw3 /dev/sdd1

执行/sbin/service rawdevices restart 将更改立刻生效。

Assigning devices:

/dev/raw/raw1 --&gt   /dev/sdb1

/dev/raw/raw1: bound to major 8, minor 17

/dev/raw/raw2 --&gt   /dev/sdc1

/dev/raw/raw2: bound to major 8, minor 33

/dev/raw/raw3 --&gt   /dev/sdd1

/dev/raw/raw3: bound to major 8, minor 49

done

2.更改权限

[root@rac1 ~]# chown oracle:dba /dev/raw/raw[1-3]

[root@rac1 ~]# chmod 660 /dev/raw/raw[1-3]

[root@rac1 ~]# ll -lat /dev/raw/raw[1-3]

crw-rw---- 1 oracle dba 162, 3 Oct 27 13:34 /dev/raw/raw3

crw-rw---- 1 oracle dba 162, 2 Oct 27 13:34 /dev/raw/raw2

crw-rw---- 1 oracle dba 162, 1 Oct 27 13:34 /dev/raw/raw1

3.创建软链接

[root@rac1 ~]# mkdir -p /u01/oradata/devdb/

[root@rac1 ~]# chown -R oracle:dba /u01

[root@rac1 ~]# ln -sf /dev/raw/raw1 /u01/oradata/devdb/asmdisk1

[root@rac1 ~]# ln -sf /dev/raw/raw2 /u01/oradata/devdb/asmdisk2

[root@rac1 ~]# ln -sf /dev/raw/raw3 /u01/oradata/devdb/asmdisk3

4.修改 /etc/udev/permissions.d/50-udev.permissions。

原始设备在引导时会重新映射。默认情况下，在引导时原始设备的拥有者将 更改为 root 用户。

如果拥有者不是 oracle 用户，则 ASM 在访问分区时会出现问题。

在 /etc/udev/permissions.d/50-udev.permissions 中为原始行“raw/*:root:disk:0660”添加注释，

然后添加一个新行“raw/*:oracle:dba:0660”。

三 配置ASM

1.自启动程序

[root@rac1 /]# rpm -ivh oracleasmlib-2.0.2-1.i386.rpm

Preparing...                                                            ########################################### [100%]

1:oracleasmlib                                                       ########################################### [100%]

[root@rac1 /]# rpm -qa | grep asm

oracleasmlib-2.0.2-1

oracleasm-2.6.9-67.0.0.0.1.ELsmp-2.0.3-2

oracleasm-support-2.0.3-2

[root@rac1 /]# /etc/init.d/oracleasm

Usage: /etc/init.d/oracleasm {start|stop|restart|enable|disable|configure|createdisk|deletedisk|querydisk|listdisks|scandisks|status}

[root@rac1 /]# /etc/init.d/oracleasm configure

Configuring the Oracle ASM library driver.

This will configure the on-boot properties of the Oracle ASM library

driver. The following questions will determine whether the driver is

loaded on boot and what permissions it will have. The current values

will be shown in brackets ('[]'). Hitting without typing an

answer will keep that current value. Ctrl-C will abort.

Default user to own the driver interface []: oracle

Default group to own the driver interface []: dba

Start Oracle ASM library driver on boot (y/n) [n]: y

Fix permissions of Oracle ASM disks on boot (y/n) [y]:

Writing Oracle ASM library driver configuration:           [ OK ]

Loading module "oracleasm":                                [ OK ]

Mounting ASMlib driver filesystem:                         [ OK ]

Scanning system for ASM disks:                             [ OK ]

[root@rac1 /]#

[root@rac1 /]#

[root@rac1 /]# /etc/init.d/oracleasm status

Checking if ASM is loaded:                                 [ OK ]

Checking if /dev/oracleasm is mounted:                     [ OK ]

三 创建ASM磁盘

[root@rac1 /]# /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1

Marking disk "/dev/sdb1" as an ASM disk:                   [ OK ]

[root@rac1 /]# /etc/init.d/oracleasm createdisk VOL2 /dev/sdc1

Marking disk "/dev/sdc1" as an ASM disk:                   [ OK ]

[root@rac1 /]# /etc/init.d/oracleasm createdisk VOL3 /dev/sdd1

Marking disk "/dev/sdd1" as an ASM disk:                   [ OK ]

[root@rac1 /]# /etc/init.d/oracleasm scandisks

Scanning system for ASM disks:                             [ OK ]

[root@rac1 /]# /etc/init.d/oracleasm listdisks

VOL1

VOL2

VOL3

四 安装数据库

通过gui程序安装数据库软件，然后在dbca创建数据库，数据文件放在asm磁盘上即可。

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/22123669/viewspace-678501/，如需转载，请注明出处，否则将追究法律责任。