slot
To enable preprovisioning on a slot in a chassis, use the slot command. To disable the slot for preprovisioning, use the no form of this command.
slot slot-number
no slot slot-number
Syntax Description
slot-numberSlot number in the chassis. The range is from 2 to 199.
Command Default
None
Command Modes
Global configuration mode
Configuration synchronization mode
Command History
Release Modification
5.0(2)N1(1)This command was introduced.
Usage Guidelines
Use this command to enable preprovisioning of features or interfaces of a module on a slot in a chassis. Preprovisioning allows you configure features or interfaces (Ethernet, Fibre Channel) on modules before the modules are inserted in the switch chassis.
Examples
This example shows how to enable a chassis slot for preprovisioning of a module:
switch(config)# slot 2
switch(config-slot)#
This example shows how to configure a switch profile to enable a chassis slot for preprovisioning of a module:
switch# config sync
Enter configuration commands, one per line. End with CNTL/Z.
switch(config-sync)# switch-profile sp
Switch-Profile started, Profile ID is 1
switch(config-sync-sp)# slot 2
switch(config-sync-sp-slot)#
This example shows how to disable a chassis slot for preprovisioning of a module:
switch(config)# no slot 2
switch(config)#
Related Commands
Command Description
provisionPreprovisions a module in a slot.
show running-config exclude-provisionDisplays the running configuration excluding the preprovisioned features.