linux 进程列表 oid,抓取linux主机的OID

CPU Statistics

Load    ##  机器负载

1 minute Load: .1.3.6.1.4.1.2021.10.1.3.1

5 minute Load: .1.3.6.1.4.1.2021.10.1.3.2

15 minute Load: .1.3.6.1.4.1.2021.10.1.3.3

CPU

percentage of user CPU time: .1.3.6.1.4.1.2021.11.9.0

raw user cpu time: .1.3.6.1.4.1.2021.11.50.0

percentages of system CPU time: .1.3.6.1.4.1.2021.11.10.0

raw system cpu time: .1.3.6.1.4.1.2021.11.52.0

percentages of idle CPU time: .1.3.6.1.4.1.2021.11.11.0

raw idle cpu time: .1.3.6.1.4.1.2021.11.53.0

raw nice cpu time: .1.3.6.1.4.1.2021.11.51.0

对应字符串是hrProcessorLoad

Memory Statistics

Total Swap Size    snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.3.0

UCD-SNMP-MIB::memTotalSwap.0 = INTEGER: 489940 kB

Available Swap Space   snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.4.0

UCD-SNMP-MIB::memAvailSwap.0 = INTEGER: 284752 kB

Total RAM in machine    snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.5.0

UCD-SNMP-MIB::memTotalReal.0 = INTEGER: 255672 kB

The available real memory    snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.6.0

UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 14456 kB

the Total free memory in the machine (free Swap memory + free RAM memory)

snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.11.0

UCD-SNMP-MIB::memTotalFree.0 = INTEGER: 298804 kB

Total RAM Shared     snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.13.0

UCD-SNMP-MIB::memShared.0 = INTEGER: 0 kB

Total RAM Buffered      snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.14.0

UCD-SNMP-MIB::memBuffer.0 = INTEGER: 2888 kB

Total Cached Memory   snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4.15.0

UCD-SNMP-MIB::memCached.0 = INTEGER: 47816 kB

Disk Statistics

The snmpd.conf needs to be edited. Add the following (assuming a machine with a single ‘/’ partition):

disk / 100000 (or)

includeAllDisks 10% for all partitions and disks

The OIDs are as follows

Path where the disk is mounted: .1.3.6.1.4.1.2021.9.1.2.1

Path of the device for the partition: .1.3.6.1.4.1.2021.9.1.3.1

Total size of the disk/partion (kBytes): .1.3.6.1.4.1.2021.9.1.6.1

Available space on the disk: .1.3.6.1.4.1.2021.9.1.7.1

Used space on the disk: .1.3.6.1.4.1.2021.9.1.8.1

Percentage of space used on disk: .1.3.6.1.4.1.2021.9.1.9.1

Percentage of inodes used on disk: .1.3.6.1.4.1.2021.9.1.10.1

System Uptime: .1.3.6.1.2.1.1.3.0

Examples

These Commands you need to run on the SNMP server

Get available disk space for / on the target host

#snmpget -v 1 -c “community” target_name_or_ip .1.3.6.1.4.1.2021.9.1.7.1

this will return available disk space for the first entry in the ‘disk’ section of snmpd.conf; replace 1 with n for the nth entry

Get the 1-minute system load on the target host

#snmpget -v 1 -c “community” target_name_or_ip .1.3.6.1.4.1.2021.10.1.3.1

Get the 5-minute system load on the target host

#snmpget -v 1 -c “community” target_name_or_ip .1.3.6.1.4.1.2021.10.1.3.2

Get the 15-minute system load on the target host

#snmpget -v 1 -c “community” target_name_or_ip .1.3.6.1.4.1.2021.10.1.3.3

Get amount of available swap space on the target host

#snmpget -v 1 -c “community” target_name_or_ip .1.3.6.1.4.1.2021.4.4.0