weixin_36977957的博客

The ultra-low-power STM32L072xx are offered in 9 different package typesfrom 32 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the ultra-low-power STM32L072xx microcontrollers suitable for a wide range of applications:  Gas/water meters and industrial sensors  Healthcare and fitness equipment  Remote control and user interface  PC peripherals, gaming, GPS equipment  Alarm system, wired and wireless sensors, video intercom This STM32L072xx datasheet should be read in conjunction with the STM32L0x2xx reference manual (RM0376). For information on the ARM ® Cortex ® -M0+ core please refer to the Cortex ® -M0+ Technical Reference Manual, available from the www.arm.com website. Figure 1 shows the general block diagram of the device family.

The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON) of 80mΩ, allowing increased load switch power handling capacity. This device is avail- able in three different versions with flexible turn on and off characteristics from very fast to slew rate lim- ited. The standard AAT4280 (-1) version has a slew rate limited turn on load switch and is functionally compatible with the AAT4250 device while offering superior R DS(ON) characteristics. The AAT4280 (-2) version features fast load switch turn on capabilities, typically less than 500ns turn on and 3µs turn off times. The AAT4280 (-3) variation offers a shutdown load discharge circuit to rapidly turn off a load circuit when the switch is disabled. All AAT4280 load switch versions operate with an input voltage ranging from 1.8V to 5.5V, making them ideal for both 3V and 5V systems. The AAT4280 also features an under-volt- age lockout which turns the switch off when an input under-voltage condition exists. Input logic levels are TTL and 2.5V to 5V CMOS compatible. The quies- cent supply current is very low, typically 2.5µA. In shutdown mode, the supply current decreases to less than 1µA. The AAT4280 is available in a Pb-free, 6-pin SOT23 or 8-pin SC70JW package and is specified over the -40°C to +85°C temperature range.