在CentOS 7.6系统中遇到加载ipmi_si驱动时报错'Nosuchdevice'。通过尝试加载ipmi_devintf、ipmi_msghandler以及指定kcs参数的方式，成功解决了问题。具体步骤包括：先加载ipmi_devintf和ipmi_msghandler模块，然后使用指定I/O地址和中断等参数加载ipmi_si模块。最终，系统发现并初始化了BMC，问题得到解决。
ipmi驱动问题
本人使用centos7.6版本的操作系统，在加载ipmi_si驱动时，报错如下：
1、[root@localhost 9-ipmitool_v1.8.18]# modprobe ipmi_si
modprobe: ERROR: could not insert ‘ipmi_si’: No such device
2、dmesg：
[ 4529.075340] IPMI System Interface driver.
[ 4529.075465] ipmi_si: Unable to find any System Interface(s)
[ 4545.278901] IPMI System Interface driver.
[ 4545.279035] ipmi_si: Unable to find any System Interface(s)
参考网友解决方法：
modprobe ipmi_devintf
modprobe ipmi_msghandler
modprobe ipmi_si type=kcs ports=0xca2 regspacings=1
dmesg：
[ 132.714101] ipmi_si hardcode-ipmi-si.0: ipmi_platform: probing via hardcoded
[ 132.714107] ipmi_si: hardcoded: io 0xca2 regsize 1 spacing 1 irq 0
[ 132.714109] ipmi_si: Adding hardcoded-specified kcs state machine
[ 132.714192] ipmi_si: Trying hardcoded-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 132.904174] ipmi_si hardcode-ipmi-si.0: Found new BMC (man_id: 0x000000, prod_id: 0x265b, dev_id: 0x20)
[ 132.965299] ipmi_si hardcode-ipmi-si.0: IPMI kcs interface initialized
问题顺利解决；
Vincent.song
参考
https://advantech-ncg.zendesk.com/hc/en-us/articles/360035180012-Cannot-load-ipmi-si-properly-with-Kernel-3-10-x-on-MIC-5322
扫一扫
7418
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
