GD32F103/303 debug port/osc port for GPIO

1. PB3/PB4/PA15, PA13(SWDIO), PA14(SWCLK), debug port setting for GPIO,
1.1 Detial link is
https://blog.csdn.net/xiaoxiaoxiaoali/article/details/126737852?ops_request_misc=%257B%2522request%255Fid%2522%253A%2522167036988316800182152564%2522%252C%2522scm%2522%253A%252220140713.130102334…%2522%257D&request_id=167036988316800182152564&biz_id=0&utm_medium=distribute.pc_search_result.none-task-blog-2_alltop_click~default-1-126737852-null-null.142^v67pc_rank_34_queryrelevant25,201^v4add_ask,213^v2t3_control2&utm_term=stm32pb3pb4%E8%AE%BE%E7%BD%AE%E4%B8%BA%E6%99%AE%E9%80%9Aio&spm=1018.2226.3001.4187

1.2,  PA15, PB3 and PB4 default is debug port

1.3, code is
/ configure PortB GPIO port
rcu_periph_clock_enable(RCU_AF);
rcu_periph_clock_enable(RCU_GPIOB);
gpio_pin_remap_config(GPIO_SWJ_SWDPENABLE_REMAP, ENABLE); //PB3 & pB4 for GPIO

 //PB4--buzzer drive
gpio_init(GPIOB, GPIO_MODE_OUT_PP, GPIO_OSPEED_2MHZ, GPIO_PIN_4);
 gpio_bit_reset(GPIOB,GPIO_PIN_4);
 gpio_bit_set(GPIOB,GPIO_PIN_4);

2. PD0, PD1 OSC port for GPIO
2.1 detail link is
https://blog.csdn.net/qq_33559992/article/details/114677437?ops_request_misc=%257B%2522request%255Fid%2522%253A%2522167037085316782425642926%2522%252C%2522scm%2522%253A%252220140713.130102334.pc%255Fall.%2522%257D&request_id=167037085316782425642926&biz_id=0&utm_medium=distribute.pc_search_result.none-task-blog-2_allfirst_rank_ecpm_v1~rank_v31_ecpm-1-114677437-null-null.142^v67pc_rank_34_queryrelevant25,201^v4add_ask,213^v2t3_control2&utm_term=stm32%20PD0%2C1%E8%AE%BE%E7%BD%AE%E4%B8%BA%E6%99%AE%E9%80%9Aio&spm=1018.2226.3001.4187
2.2, PD0 & PD1 for OSC

2.3, setting code is
//Pd0–H, pd1–pwm
rcu_periph_clock_enable(RCU_AF);
rcu_periph_clock_enable(RCU_GPIOD);
gpio_pin_remap_config(GPIO_PD01_REMAP, ENABLE); //map PD0&PD1 as GPIO from OSC

gpio_init(GPIOD, GPIO_MODE_OUT_PP, GPIO_OSPEED_2MHZ, GPIO_PIN_0 | GPIO_PIN_1);
gpio_bit_reset(GPIOD,GPIO_PIN_0 | GPIO_PIN_1); //turn off