fsw是什么意思_aluminum fsw是什么意思

1. The result shows that for 6061-T6 aluminum alloy thin sheets of 1 mm in thickness, the best welding condition is the rotating speed of 1800 rmin^(-1) and the welding speed of 1000 mmmin^(-1). Under this condition, the Vickers hardness, tensile strength, and elongation of the joint are about 80%, 103%, and 54% as large as those of parent material, respectively. These mechanical properties are in agreement with the microstructure.

结果表明：对于1 mm厚度6061-T6铝合金，FSW的最优工艺参数为旋转速度1800 rmin^(-1)，焊接速度1000 mmmin^(-1)；在此参数下，接头的硬度值达到母材的80%左右，抗拉强度达到母材的103%，延伸率达到母材的54%；接头的力学性能与微观结构相符。

2. The results show the welded joint of7075 aluminum alloy welded by FSW has high tensile strength.

结果表明：采用搅拌摩擦焊焊接7075铝合金时，焊接接头具有较好抗拉性能。

3. The result of the investigation proved that the joints of copper, brass alloy and copper to aluminum alloy could be successfully carried out by FSW when the optimal welding parameters were chosen.

本课题通过工艺实验证明，当工艺参数选择最佳值时，能够成功实现紫铜、黄铜，紫铜/铝合金的搅拌摩擦焊连接。

4. Friction stir welding of aluminum extrusions for aerospace

飞机铝合金挤压型材结构的FSW焊接

5. Mechanical behavior and fatigue properties of the LF2 aluminum joints by friction stir welding (FSW) were studied and the S-N curve of joints were established.

对LF2铝合金搅拌摩擦焊接接头的静载力学行为和疲劳特性进行了研究，建立了焊接接头的S-N曲线。

6. aluminum fsw的反义词

6. Effect of Temperature on Mechanical Properties of 2219 Aluminum Alloy and Welding Joint of FSW

温度对2219铝合金及搅拌摩擦焊焊接接头性能的影响

7. Numerical simulation of tensile deformation on aluminum alloy FSW lap joints

铝合金搭接搅拌摩擦焊接头拉伸变形的数值模拟

8. Comparison of Microstructure and Properties of FSW and MIG Joint for Aluminum Alloy

铝合金搅拌摩擦焊与熔化极氩弧焊接头组织性能比较

9. 2219 - T6 aluminum alloy was welded using FSW.

对2219-T6铝合金进行了直接搅拌摩擦焊接。

10. So fsw method is better than conventional welding methods in welding pure aluminum.

由此认为，采用FSW法焊接纯铝是常规焊接方法所不能比拟的。