[root@localhost ~]# ./storcli64 show all
Segmentation fault (core dumped)
[root@localhost~]# ./storcli64 /c0 show all
Generating detailed summary of the adapter, it may take awhileto complete.
Controller= 0Status=Failure
Description=None
Detailed Status :===============
------------------------------------------------Ctrl Status ErrCd ErrMsg------------------------------------------------
0 Failed 255 Failed to getBus Information------------------------------------------------Basics :======Controller= 0Model= AVAGO MegaRAID SAS 9361-8i 2GB
Serial Number=SK84171618
Current Controller Date/Time = 09/05/2019, 09:28:34Current System Date/time = 09/05/2019, 17:28:34SAS Address=500605b00ece47f0
PCI Address=NA
Mfg Date= 10/12/18Rework Date= 00/00/00Revision No= 22002Version :=======Firmware Package Build= 24.21.0-0017Firmware Version= 4.680.00-8274CPLD Version= 26747-01A
Bios Version= 6.36.00.1_4.19.08.00_0x06180202
HII Version= 03.25.05.03Ctrl-R Version = 5.19-0601Preboot CLI Version= 01.07-05:#%0000NVDATA Version= 3.1705.00-0005Boot Block Version= 3.07.00.00-0003Driver Name=megaraid_sas
Driver Version= 07.706.03.00-rc1
Bus :===Vendor Id= 0x1000Device Id= 0x5DSubVendor Id= 0x1000SubDevice Id= 0x9361Host Interface= PCI-E
Device Interface= SAS-12G
Pending ImagesinFlash :=======================Image name=No pending images
Status :======Controller Status=Optimal
Memory Correctable Errors= 0Memory Uncorrectable Errors= 0ECC Bucket Count= 0Any Offline VD Cache Preserved=No
BBU Status=NA
PD Firmware Downloadin progress =No
Lock Key Assigned=No
Failed toget lock key on bootup =No
Lock key has not been backed up=No
Bios was not detected during boot=No
Controller must be rebooted to complete security operation=No
A rollback operationis in progress =No
At least one PFK existsin NVRAM =Yes
SSC Policyis WB =No
Controller has booted into safe mode=No
Current Personality= RAID-Mode
Supported Adapter Operations :============================Rebuild Rate=Yes
CC Rate=Yes
BGI Rate=Yes
Reconstruct Rate=Yes
Patrol Read Rate=Yes
Alarm Control=Yes
Cluster Support=No
BBU=Yes
Spanning=Yes
Dedicated Hot Spare=Yes
Revertible Hot Spares=Yes
Foreign Config Import=Yes
Sel