文章内容
1.下载Nginx代码
2.建立模块目录和代码
3.创建Makefile文件
4.Eclipse下创建工程
5.修改Eclipse下配置参数
6.测试
1.本文假设你已成功安装Nginx,当然如果你没有安装,也没有关系。
2.本文内容参考百度文库http://wenku.baidu.com/view/253c98d5b14e852458fb57f5.html,可惜下载需要5分让人郁闷,而且有些地方也不一样。
1.下载Nginx最新代码
$wget http://www.nginx.org/download/nginx-1.2.3.tar.gz
解压缩 $tar zxvf nginx-1.2.3.tar.gz
进入目录 $cd nginx-1.2.3
2.建立模块目录与代码
注意:1)为了能够调试module,我们需要将module的源码放入nginx的根目录nginx-1.2.3目录中。
2)为了以后目录结构的清晰,我的目录结构如下nginx-1.2.3/add_module_src/module 源代码
步骤一:
1.检查当前目录是否为Nginx-1.2.3目录 pwd
2.创建add_module_src 目录 $ mkdir add_module_src
3.进入add_module_src目录,创建ngx_hello_world_module目录 $cd add_module_src $mkdir ngx_hello_world_module
4.进入ngx_hello_world_module,新建两个文档config和ngx_http_hello_world.c两个文件。
命令1) $cd ngx_hello_world_module 2)$vim config3)$vim ngx_http_hello_world.c
其中config中内容为:
ngx_http_hello_world.c中内容为
3.创建Makefile文件
注意:要将目录转换到Nginx-1.2.3目录下
步骤一:
1.利用nginx提供的configure脚本生成Makefile文件。
根据http://blog.csdn.net/yankai0219/article/details/8001210文中所写
./configure--user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module --with-ipv6 --add-module=../add_module_src /ngx_hello_world_module --with-debug
注意:1)--add-module添加模块,后面即该模块源码的位置。
2)--with-debug指定debug编译。
4.在Eclipse中建工程,
1)根据中所写http://blog.csdn.net/yankai0219/article/details/8000034中4.导入已经存在的项目中的方法,导入Nginx 源码
5.修改Eclipse下配置参数
1)修改build选项。主要是修改Build的取值。
在我的Eclipse版本中,修改方法如下:
1.在Project Explorer中选中Nginx-1.2.3项目,点击右键选中Project Properties。在右侧找到C/C++ Build。
2.C/C++ Build ----Behavior 将Build改为空即可。如下图所示
3.配置运行参数,打开Run Configuration对话框
1)在菜单栏Run---Run Configuration 中设置。C/C++ Application中选择objs/nginx(如果没有,先make一次)。Arguments添加 -c /home/hpnl/nginx_source/nginx-1.2.3/conf/nginx.conf指定运行时配置文件。注意:所添加的conf文件是在nginx源代码目录中的。
2)修改该conf的内容(完整文件)加粗字体为改动部分。
#user nobody;
worker_processes 1;
daemon off;
#daemon must be set as off
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
server {
listen 80;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root html;
index index.html index.htm;
}
location /hello{
hello_world;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443;
# server_name localhost;
# ssl on;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_timeout 5m;
# ssl_protocols SSLv2 SSLv3 TLSv1;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
}
6.测试
点击运行, 在命令行中输入$ curl http://localhost/hello 输出hello,world
到此为止,就可以对自己添加的模块设置断点,进行调试了。