aruba交换机配置命令_aruba交换机配置实战篇.docx

一，忘记密码按以下操作超级账号密码passwordforgetme!!Admin 密码修改ArubaS2500-24P) (config) #mgmt-user admin rootPassword:********//admin123!Re-Type password:******** //admin123!(ArubaS2500-24P) (config) #endEnable密码重新设置(ArubaS2500-24P) (config) #enable secret?secret Enter the enable password(ArubaS2500-24P) (config) #enable secretPassword:******、直接输入新密码、Re-Type password:******再次输入这个账号只能用于需改密码，需要配置的话要退出用admin账号进入才能操作二，交换机初始化<<<<< Welcome to Aruba Networks - Aruba S2500-24P >>>>>User: adminPassword: ******** ///admin123//默认密码(ArubaS2500-24P) >enablePassword:******//enableQuick-setup helps in setting the basic configuration of the systemAutoconfiguration of system will be stopped, if Quick-setup is launched by userInvoke Quick-setup (y|n)??? [y]:y***************** Welcome to the ArubaS2500-24P setup dialog *****************This dialog will help you to set the basic configuration for the switch.These settings, except for the Country Code, can later be changed from theCommand Line Interface or Graphical User Interface.Commands: Submit input or use [default value], Help Back, Forward, Line begin, Line end Delete, Delete back, Delete to end of line Previous question , Restart beginning, to exitEnter System name [ArubaS2500-24P]: aruba2500-xmu-2fConfigure inband management VLAN [yes|no]: yes是否开启管理VLANInband management vlan id [1]: 711管理VLAN段Enter the member interfaces for management VLAN (Example 0/0/0,0/0/1): 0/0/23,0/1/1添加需要trunk的端口Enter management VLAN IP address [54]: 管理ipEnter mgmt VLAN interface subnet mask []: 回车Enter Out of band management interface IP address [none]: 回车Enter IP Default gateway [none]: 网关Enter Country code (ISO-3166), for supported list: CN中国You have chosen Country code CN for China (yes|no)?: yesEnter Time Zone [PST-8:0]: CST+8:0Enter Time in UTC [03:48:15]: Enter Date (MM/DD/YYYY) [7/4/2013]: Enter Password for admin login (u