邻居发现命令
[H3C]display lldp neighbor-information list
H3C链路聚合配置
[H3C]interface Ten-GigabitEthernet 1/0/1
[H3C-Ten-GigabitEthernet1/0/1]port link-mode bridge
[H3C-Ten-GigabitEthernet1/0/1]description "Server"
[H3C-Ten-GigabitEthernet1/0/1]port link-type trunk
[H3C-Ten-GigabitEthernet1/0/1]port trunk pvid vlan 10
[H3C-Ten-GigabitEthernet1/0/1]bpdu-drop any
[H3C-Ten-GigabitEthernet1/0/1]stp edged-port
[H3C-Ten-GigabitEthernet1/0/1]port link-aggregation group 1
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]port link-type trunk
[H3C-Bridge-Aggregation1]port trunk pvid vlan 10 #设置本帧vlan为vlan 10
[H3C-Bridge-Aggregation1]link-aggregation mode dynamic #使用LACP(ComwareV5配置方法:lacp mode active)如使用静态不配置该命令
[H3C-Bridge-Aggregation1]lacp edge-port #配置聚合接口为聚合边缘接口,边缘接口一般用来接host
[H3C-Bridge-Aggregation1]stp edged-port
[H3C]display link-aggregation summary #H3C查看使用的链路聚合协议
DHCP中继配置
dhcp enable
dhcp relay server-group 1 ip x.x.x.x #x为DHCP服务器的ip地址
int vlan 30
dhcp select relay
dhcp relay server-select 1
在H3C交换机配置dhcp服务器时查看地址的分配情况
dis dhcp server ip-in-use pool vlan1006
dis dhcp server free-ip pool vlan1006
在H3C交换机上释放dhcp分配的地址
reset dhcp server ip-in-use all
查看接口描述
[H3C]display interface brief description
[H3C]display ip interface brief description
default接口
[h3c]interface GigabitEthernet 1/0/41
[h3c-GigabitEthernet1/0/41]default
802.1X配置
1、全局开启802.1X
dot1x
dot1x authentication-method eap
dot1x timer quiet-period10dot1x timer tx-period10mac-authentication
mac-authentication domain 1x
radius scheme 1x
primary authentication172.28.101.3primary accounting172.28.101.3secondary authentication172.28.101.2secondary accounting172.28.101.2key authentication cipher$c$3$NAIz9CqJDECj7p7qCeuCDXbmfRIcyOtxxCDlaA==key accounting cipher$c$3$TaTYg1NBpPoTzE97hwyZJSEnRnFiBvIpaVoOgg==user-name-formatwithout-domain
radius scheme system
user-name-formatwithout-domain
domain 1x
authentication lan-access radius-scheme 1x
authorization lan-access radius-scheme 1x
accounting lan-access radius-scheme 1x2、接口下开启802.1X
interface GigabitEthernet2/0/1description802.1x_authenration
port link-typehybrid
undo port hybrid vlan1port hybrid vlan1030 3000untagged
port hybrid pvid vlan3000mac-vlan enable
stp edged-port
dot1x
undo dot1x handshake
dot1x mandatory-domain 1x
undo dot1x multicast-trigger
dot1x re-authenticate
dot1x unicast-trigger
dot1x guest-vlan1030dot1x auth-fail vlan1030mac-authentication
mac-authentication domain 1x
mac-authentication guest-vlan1030mac-authentication parallel-with-dot1x
View Code
日志管理
display logbuffer #查看日志
reset logbuffer #清除日志
查看arp
[CORE]arp max-learning-number 1024 #设置arp最大学习条目(h3c最大条目数为1024)
[CORE]dis arp all count #查看arp已使用条目
reset arp dynamic #清除动态arp表
[CORE]dis ip routing-table summary #查看最大支持路由条目
SSH,Telnet登陆配置
user-interface vty 0 4authentication-mode password
user privilege level3set authentication password cipher admin
local-user admin
password cipher admin
authorization-attribute level 3service-type sshtelnet
service-type web
user-interface vty 0 4authentication-mode scheme
H3C版本升级及打补丁:
dis version
ftp 192.168.1.1
ftp>help
ftp>dir
ftp>get S6800-CMW710-R2612P02.ipe
ftp>get S6800-CMW710-SYSTEM-R2612P02H21.bin
boot-loader file flash:/S6800-CMW710-R2612P02.ipe all main
dis boot-loader
reboot
dis patch information
dis install active
dir
install activate patch flash:/S6800-CMW710-SYSTEM-R2612P02H21.bin all
install commit
dis install active
参考链接:
https://zhiliao.h3c.com/questions #H3C知了社区
https://info.support.huawei.com/onlinetoolweb/ptmngsys/Web/tsrev_s/cn/content/s/index.html
https://info.support.huawei.com/onlinetoolweb/tsrev/cn/index.html
http://www.h3c.com/cn/d_201811/1131076_30005_0.htm #解读vxlan