属性
含义
id
编号
select_type
查询类型
table
表
type
类型
possible_keys
预测用到的索引
key
实际使用的索引
key_len
实际使用索引的长度
ref
表之间的引用
rows
通过索引查询到的数据量
Extra
额外的信息
本节将对上述查询计划中各个属性含义进行讲解:
1.id:id的含义在上篇文章中已经进行讲解。
2.select_type:查询类型
PRIMARY:包含子查询SQL中的 主查询 (最外层)
SUBQUERY:包含子查询SQL中的 子查询 (非最外层)
simple:简单查询(不包含子查询、union)
derived:衍生查询(使用到了临时表)
a.在from子查询中只有一张表
explain select cr.cname from ( select * from course where tid in (1,2) ) cr ;
b.在from子查询中, 如果有table1 union table2 ,则table1 就是derived,table2就是union
explain select cr.cname from ( select * from course where tid = 1 union select * from course where tid = 2 ) cr ;
union:上例
union result:告知开发人员,哪些表存在union 查询
3.type:索引类型、类型
Sql查询性能排行:system>const>eq_ref>ref>range>index>all
要对type进行优化的前提:有索引。其中:system,const只是理想情况;实际能达到 ref>range
system(忽略): 只有一条数据的系统表 ;或 衍生表只有一条数据的主查询
const:仅仅能查到一条数据的SQL ,用于Primary key 或unique索引 (类型 与索引类型有关)
举例:explain select tid from test01 where tid =1 ; 其中tid是主键
eq_ref:唯一性索引:对于每个索引键的查询,返回匹配唯一行数据(有且只有1个,不能多 、不能0)
select ... from ..where name = ... .常见于唯一索引 和主键索引。
举例: alter table teacherCard add constraint pk_tcid primary key(tcid);
alter table teacher add constraint uk_tcid unique index(tcid) ;
explain select t.tcid from teacher t,teacherCard tc where t.tcid = tc.tcid ;
以上SQL,用到的索引是 t.tcid,即teacher表中的tcid字段;
如果teacher表的数据个数 和 连接查询的数据个数一致(都是3条数据),则有可能满足eq_ref级别;否则无法满足。从这里可以看出const和eq_ref有一定区别,像例子中有多条数据根据unique索 引查询,每一条都能查出来有且只有一条对应数据。
ref:非唯一性索引,对于每个索引键的查询,返回匹配的所有行(0,多)
range:检索指定范围的行 ,where后面是一个范围查询(between ,> < >=, 特殊:in有时候会失效 ,从而转为 无索引all)
举例:alter table teacher add index tid_index (tid) ;
explain select t.* from teacher t where t.tid in (1,2) ;
explain select t.* from teacher t where t.tid <3 ;
index:查询全部索引中数据
explain select tid from teacher ; --tid 是索引, 只需要扫描索引表,不需要所有表中的所有数据。
all:查询全部表中的数据
explain select cid from course ; --cid不是索引,需要全表所有,即需要所有表中的所有数据
system/const: 结果只有一条数据
eq_ref:结果多条;但是每条数据是唯一的 ;
ref:结果多条;但是每条数据是是0或多条 ;
4.possible_keys :可能用到的索引,是一种预测,不准。这里就不在详解。
5. key :实际使用到的索引。 这里不在详解
6.key_len :索引的长度 ;
作用:用于判断复合索引是否被完全使用 (a,b,c)。
create table test_kl(
name char(20) not null default '');
alter table test_kl add index index_name(name) ;
explain select * from test_kl where name ='' ; -- key_len :60
key_len为60的原因:在utf8中,1个字符占用3个字节
alter table test_kl add column name1 char(20) ; --name1可以为null
alter table test_kl add index index_name1(name1) ;
explain select * from test_kl where name1 ='' ; -- key_len:61
key_len为61原因:如果索引字段可以为空,则会单独用一个字节进行标识
增加一个复合索引
alter table test_kl add index name_name1_index (name,name1) ;
explain select * from test_kl where name1 = '' ; -- key_len:121
explain select * from test_kl where name = '' ; -- key_len:60
varchar(20):
alter table test_kl add column name2 varchar(20) ; --可以为Null
alter table test_kl add index name2_index (name2) ;
explain select * from test_kl where name2 = '' ; --63
20*3=60 + 1(null) +2(用2个字节 标识可变长度) =63
utf8:1个字符3个字节
gbk:1个字符2个字节
latin:1个字符1个字节
7. ref : 注意与type中的ref值区分。
作用: 指明当前表所 参照的 字段。
select ....where a.c = b.x ;(其中b.x可以是常量,const)
8.rows: 被索引优化查询的 数据个数 (实际通过索引而查询到的 数据个数)
explain select * from course c,teacher t where c.tid = t.tid and t.tname = 'tz' ;
9.Extra:额外信息
(i).using filesort : 性能消耗大;需要“额外”的一次排序(查询) 。常见于 order by 语句中。order by 先查询后排序
举例:10个人 根据年龄排序。a1:姓名 a2:年龄
create table test02(
a1 char(3),
a2 char(3),
a3 char(3),
index idx_a1(a1),
index idx_a2(a2),
index idx_a3(a3));
单索引:
explain select * from test02 where a1 ='' order by a1 ; -- 不会出现using filesort
explain select * from test02 where a1 ='' order by a2 ; --using filesort
小结:对于单索引, 如果排序和查找是同一个字段,则不会出现using filesort;如果排序和查找不是同一个字段,则会出现using filesort;
避免: where哪些字段,就order by那些字段2
复合索引:不能跨列(最佳左前缀)
alter table test02 add index idx_a1_a2_a3 (a1,a2,a3) ;
explain select *from test02 where a1='' order by a3 ; --using filesort
explain select *from test02 where a2='' order by a3 ; --using filesort
explain select *from test02 where a1='' order by a2 ;
explain select *from test02 where a2='' order by a1 ; --using filesort
小结:避免: where和order by 按照复合索引的顺序使用,不要跨列或无序使用。
(ii). using temporary:性能损耗大 ,用到了临时表。一般出现在group by 语句中。
explain select a1 from test02 where a1 in ('1','2','3') group by a1 ;
explain select a1 from test02 where a1 in ('1','2','3') group by a2 ; --using temporary
避免:查询那些列,就根据那些列 group by .
(iii). using index :性能提升; 索引覆盖(覆盖索引)。原因:不读取原文件,只从索引文件中获取数据 (不需要回表查询)
只要使用到的列 全部都在索引中,就是索引覆盖using index
例如:test02表中有一个复合索引(a1,a2,a3)
explain select a1,a2 from test02 where a1='' or a2= '' ; --using index
drop index idx_a1_a2_a3 on test02;
alter table test02 add index idx_a1_a2(a1,a2) ;
explain select a1,a3 from test02 where a1='' or a3= '' ;
如果用到了索引覆盖(using index时),会对 possible_keys和key造成影响:
a.如果没有where,则索引只出现在key中;
b.如果有where,则索引 出现在key和possible_keys中。
explain select a1,a2 from test02 where a1='' or a2= '' ;
explain select a1,a2 from test02 ;
(iii).using where (进行过滤):表示MySQL服务器在存储引擎收到记录后进行“后过滤”,如果查询未能使用索引,usingwhere的作用只是用于提醒我们MySQL将用where子句来过滤结果集。这个一般发 生在MySQL服务器,而不是存储引擎层。一般发生在不能走索引的扫描情况下或者走索引扫描,但是有些查询条件不在索引当中的情况下。
(iv). impossible where : where子句永远为false
explain select * from test02 where a1='x' and a1='y' ;