at指令 meid_[4G]常用AT指令

The GPRS communication module is controlled by terminal (e.g. H50) firmware.

The actions are mapped to  3 ~4 AT command, and one PPP process.

1. Request GSM

AT+CREG.

2. Attached to GPRS network

AT+CGATT

AT+CGDCONT

3. PPP process after *99***1#

Our module control is very simple: AT commands. The following commands flow are applicable to the MC55, MC56 and SIMCOM's SIM300.

Some recorded AT commands flows are...

from China Mobile's SIM card (in H50+ MC55(?)) generated AT-log in Shanghai, captured on

Sat morning 1am+ at 19 Jun 2010:

--------

AT :　    [Start-up confirmation that module will response AT command]

ATE0V1 ： [disable echo, detailed responses on]

AT\Q3                     [RTS/CTS hardware handshake on]

at+csq                    [Signal quality]

at+creg?                  [Network registration]

AT+CIMI                   [Request International Mobile Subscriber Identity (IMSI)]

AT+GSN                    [request International Mobile Equipment Identity (IMEI)]

at+cgatt=1                [attach the terminal to GPRS service]

at+cgatt?                 [Return the current GPRS service state]

at+cgdcont=1,"IP","cmnet" [Define PDP Context]

at+csq                    [Signal quality]

atd*99***1#               [Request GPRS service]

-----------------------------------------------------------------------------------------------------------------------

如何不打开minicom获取AT指令的结果

$ cat /dev/ttyUSB2 > result.log &

$ echo "ATI" > /dev/ttyUSB2