micropython stm32f103_STM32F7DISCO 移植 micropython

root@bruno-linux:~/git/micropython/stmhal# make BOARD=STM32F7DISC deploy-stlink

Use make V=1 or set BUILD_VERBOSE in your environment to increase build verbosity.

Writing build-STM32F7DISC/firmware0.bin to the board via ST-LINK

2016-03-29T18:37:31 INFO src/stlink-usb.c: bus 001 dev 021

2016-03-29T18:37:31 INFO src/stlink-common.c: Loading device parameters....

2016-03-29T18:37:31 INFO src/stlink-common.c: Device connected is: F7 device, id 0x10016449

2016-03-29T18:37:31 INFO src/stlink-common.c: SRAM size: 0x50000 bytes (320 KiB), Flash: 0x100000 bytes (1024 KiB) in pages of 2048 bytes

2016-03-29T18:37:31 INFO src/stlink-common.c: Attempting to write 10084 (0x2764) bytes to stm32 address: 134217728 (0x8000000)

EraseFlash - Sector:0x0 Size:0x8000

Flash page at addr: 0x08000000 erased

2016-03-29T18:37:31 INFO src/stlink-common.c: Finished erasing 1 pages of 32768 (0x8000) bytes

2016-03-29T18:37:31 INFO src/stlink-common.c: Starting Flash write for F2/F4/L4

2016-03-29T18:37:31 INFO src/stlink-common.c: Successfully loaded flash loader in sram

enabling 32-bit flash writes

size: 10084

2016-03-29T18:37:31 INFO src/stlink-common.c: Starting verification of write complete

2016-03-29T18:37:31 INFO src/stlink-common.c: Flash written and verified! jolly good!

Writing build-STM32F7DISC/firmware1.bin to the board via ST-LINK

2016-03-29T18:37:31 INFO src/stlink-usb.c: bus 001 dev 021

2016-03-29T18:37:31 INFO src/stlink-common.c: Loading device parameters....

2016-03-29T18:37:31 INFO src/stlink-common.c: Device connected is: F7 device, id 0x10016449

2016-03-29T18:37:31 INFO src/stlink-common.c: SRAM size: 0x50000 bytes (320 KiB), Flash: 0x100000 bytes (1024 KiB) in pages of 2048 bytes

2016-03-29T18:37:31 INFO src/stlink-common.c: Attempting to write 274300 (0x42f7c) bytes to stm32 address: 134348800 (0x8020000)

EraseFlash - Sector:0x4 Size:0x20000

Flash page at addr: 0x08020000 erasedEraseFlash - Sector:0x5 Size:0x40000

Flash page at addr: 0x08040000 erased

2016-03-29T18:37:35 INFO src/stlink-common.c: Finished erasing 2 pages of 262144 (0x40000) bytes

2016-03-29T18:37:35 INFO src/stlink-common.c: Starting Flash write for F2/F4/L4

2016-03-29T18:37:35 INFO src/stlink-common.c: Successfully loaded flash loader in sram

enabling 32-bit flash writes

size: 32768

size: 32768

size: 32768

size: 32768

size: 32768

size: 32768

size: 32768

size: 32768

size: 12156

2016-03-29T18:37:38 INFO src/stlink-common.c: Starting verification of write complete

2016-03-29T18:37:39 INFO src/stlink-common.c: Flash written and verified! jolly good!