单片机18b20c语言程序,51单片机与DS18B20程序

#include

#include

#define uchar unsigned char

#define uint unsigned int

sbit DQ = P2^2; //数据口define interface

sbit dula = P2^6; //数码管段选

sbit wela = P2^7; //数码管位选

uint temp; //温度值 variable of temperature

//不带小数点

unsigned char code table[] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,

0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71};

//带小数点

unsigned char code table1[] = {0xbf,0x86,0xdb,0xcf,0xe6,0xed,0xfd,0x87,0xff,0xef};

//

void Display(uint temp) //显示程序

{

uchar A1,A2,A3;

A1 = temp/100; //百位

A2 = temp%100/10; //十位

A3 = temp%10; //个位

dula = 0;

P0 = table[A1]; //显示百位

dula = 1; //打开段选,对应74573的锁存位,高电平不锁存

dula = 0;

wela = 0;

P0 = 0x7e;

wela = 1; //打开位选

wela = 0;

delay(0);

dula = 0;

P0 = table1[A2]; //显示十位,使用的是有小数点的数组(因为temp值扩大了10倍,虽然是十位,实际为个位)

dula = 1;

dula = 0;

wela = 0;

P0 = 0x7d;

wela = 1;

wela = 0;

delay(0);

P0 = table[A3]; //显示个位

dula = 1;

dula = 0;

P0 = 0x7b;

wela = 1;

wela = 0;

delay(0);

}

void main()

{

while(1)

{

Display(Get_Tmp());

}

}