linux mmc 读写,这个mmc读取linux的原因是什么

linux中这个mmc读取问题的原因是什么？请帮忙解决这个问题？请检查下面的内核启动日志帮我解决这个问题..

我已经启用了mmc编译的相关驱动程序并使用新创建的内核映像启动了我正在获取内核启动loogs,如下所示

mmc0: card lacks mandatory switch function,performance might suffer.

mmc0: host does not support reading read-only switch. assuming write-enable.

mmc0: new SD card at address b368

mmcblk0: mmc0:b368 SMI-S 8.00 MiB

mmcblk0:

mmcblk0: retrying using single block read

mmcblk0: error -110 transferring data,sector 0,nr 8,card status 0xb00

end_request: I/O error,dev mmcblk0,sector 0

mmcblk0: error -110 sending read/write command,response 0xb00,card status 0x40

end_request: I/O error,sector 1

mmcblk0: error -110 sending read/write command,response 0x400b00,card status 0

end_request: I/O error,sector 2

mmcblk0: error -110 sending read/write command,sector 3

mmcblk0: error -110 sending read/write command,sector 4

mmcblk0: error -110 sending read/write command,sector 5

mmcblk0: error -110 sending read/write command,sector 6

mmcblk0: error -110 sending read/write command,sector 7

Buffer I/O error on device mmcblk0,logical block 0

mmcblk0: retrying using single block read

mmcblk0: error -110 sending read/write command,logical block 0

unable to read partition table