zabbix 硬件功能_基于Zabbix IPMI监控服务器硬件状况

最新推荐文章于 2024-01-08 11:18:45 发布
最新推荐文章于 2024-01-08 11:18:45 发布
阅读量634 收藏
点赞数
文章标签： zabbix 硬件功能
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_39648430/article/details/111800903
版权
本文介绍了如何使用Zabbix通过IPMI（Intelligent Platform Management Interface）来监控服务器的硬件状态，包括系统板传感器、温度、电压、风扇速度等。通过检查输出的事件记录和传感器状态，可以发现潜在的硬件问题，如系统板入侵警告、硬盘故障、温度警告等，从而及时进行故障排查和维护。
摘要由CSDN通过智能技术生成

# ./check_ipmi_sensor -f ipmi.cfg -H 10.103.1.100 -vvv------------- debug output for sel (-vvv is set): ------------

/usr/sbin/ipmi-sel was executed with the following parameters:/usr/sbin/ipmi-sel -h 10.103.1.100 --config-file ipmi.cfg --driver-type=LAN_2_0 --output-event-state --interpret-oem-data --entity-sensor-names

output of FreeIPMI:

ID| Date | Time | Name | Type | State |Event1 | Apr-08-2011 | 06:42:13 | System Board SEL | Event Logging Disabled | Nominal | Log Area Reset/Cleared2 | Jan-01-1970 | 08:00:31 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off3 | Jan-01-1970 | 08:00:36 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off4 | Aug-15-2011 | 23:09:53 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h5 | Aug-16-2011 | 11:38:25 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h6 | Aug-16-2011 | 11:38:25 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h7 | Aug-16-2011 | 11:38:55 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h8 | Jun-10-2012 | 22:41:13 | System Board Ambient Temp | Temperature | Warning | Upper Non-critical - going high ; Sensor Reading = 45.00 C ; Threshold = 45.00C9 | Jun-11-2012 | 02:53:53 | System Board Ambient Temp | Temperature | Nominal | Upper Non-critical - going high ; Sensor Reading = 43.00 C ; Threshold = 45.00C10 | Nov-05-2012 | 21:56:42 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h11 | Nov-14-2012 | 21:53:58 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h12 | Nov-14-2012 | 21:53:58 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h13 | Nov-14-2012 | 21:54:19 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h14 | Nov-15-2012 | 16:12:03 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h15 | Nov-17-2012 | 17:14:34 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h16 | Nov-17-2012 | 17:14:34 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h17 | Nov-17-2012 | 17:15:40 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h18 | Nov-19-2012 | 20:47:57 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h19 | Nov-19-2012 | 20:50:04 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h20 | Jan-01-1970 | 08:00:33 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off21 | Jan-01-1970 | 08:00:38 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off22 | Jun-27-2014 | 17:27:38 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h23 | Jun-27-2014 | 17:27:53 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h24 | Jan-01-1970 | 08:00:31 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off25 | Jan-01-1970 | 08:00:36 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off26 | Oct-31-2016 | 05:48:35 | System Board Ambient Temp | Temperature | Warning | Lower Non-critical - going low ; Sensor Reading = 8.00 C ; Threshold = 8.00C27 | Oct-31-2016 | 09:00:38 | System Board Ambient Temp | Temperature | Nominal | Lower Non-critical - going low ; Sensor Reading = 10.00 C ; Threshold = 8.00C------------- debug output for sensors (-vvv is set): ------------script was executed with the following parameters:

./check_ipmi_sensor -f ipmi.cfg -H 10.103.1.100 -vvv

check_ipmi_sensor version:3.9FreeIPMI version:

ipmi-sensors - 1.2.9FreeIPMI was executed with the following parameters:/usr/sbin/ipmi-sensors -h 10.103.1.100 --config-file ipmi.cfg --quiet-cache --sdr-cache-recreate --interpret-oem-data --output-sensor-state --ignore-not-available-sensors --driver-type=LAN_2_0 --output-sensor-thresholds

FreeIPMI return code:0output of FreeIPMI:

Record ID| Sensor Name | Sensor Group | Monitoring Status | Sensor Units |Sensor Reading5 | Ambient Temp | Temperature | Nominal | C | 28.000000

7 | CMOS Battery | Battery | Nominal | N/A | 'OK'

8 | VCORE PG | Voltage | Nominal | N/A | 'State Deasserted'

9 | VCORE PG | Voltage | Nominal | N/A | 'State Deasserted'

10 | 0.75 VTT PG | Voltage | Nominal | N/A | 'State Deasserted'

11 | 0.75 VTT PG | Voltage | Nominal | N/A | 'State Deasserted'

12 | CPU VTT PG | Voltage | Nominal | N/A | 'State Deasserted'

13 | 1.5V PG | Voltage | Nominal | N/A | 'State Deasserted'

14 | 1.8V PG | Voltage | Nominal | N/A | 'State Deasserted'

15 | 5V PG | Voltage | Nominal | N/A | 'State Deasserted'

16 | MEM CPU2 FAIL | Voltage | Nominal | N/A | 'State Deasserted'

17 | 5V Riser PG | Voltage | Nominal | N/A | 'State Deasserted'

18 | MEM CPU1 FAIL | Voltage | Nominal | N/A | 'State Deasserted'

19 | VTT CPU2 FAIL | Voltage | Nominal | N/A | 'State Deasserted'

20 | VTT CPU1 FAIL | Voltage | Nominal | N/A | 'State Deasserted'

21 | 0.9V PG | Voltage | Nominal | N/A | 'State Deasserted'

22 | CPU2 1.8 PLL PG | Voltage | Nominal | N/A | 'State Deasserted'

23 | CPU1 1.8 PLL PG | Voltage | Nominal | N/A | 'State Deasserted'

24 | 1.1 FAIL | Voltage | Nominal | N/A | 'State Deasserted'

25 | 1.0 LOM FAIL | Voltage | Nominal | N/A | 'State Deasserted'

26 | 1.0 AUX FAIL | Voltage | Nominal | N/A | 'State Deasserted'

27 | Heatsink Pres | Entity Presence | Nominal | N/A | 'Entity Present'

28 | iDRAC6 Ent Pres | Entity Presence | Critical | N/A | 'Entity Absent'

29 | USB Cable Pres | Entity Presence | Nominal | N/A | 'Entity Present'

31 | Riser Presence | Entity Presence | Nominal | N/A | 'Entity Present'

32 | FAN MOD 1A RPM | Fan | Nominal | RPM | 3480.000000

34 | FAN MOD 2A RPM | Fan | Nominal | RPM | 3480.000000

36 | FAN MOD 3A RPM | Fan | Nominal | RPM | 3480.000000

39 | FAN MOD 4A RPM | Fan | Nominal | RPM | 3480.000000

40 | Presence | Entity Presence | Nominal | N/A | 'Entity Present'

41 | Presence | Entity Presence | Nominal | N/A | 'Entity Present'

42 | Presence | Entity Presence | Nominal | N/A | 'Entity Present'

43 | Presence | Entity Presence | Nominal | N/A | 'Entity Present'

44 | Presence | Entity Presence | Nominal | N/A | 'Entity Present'

45 | Status | Processor | Nominal | N/A | 'Processor Presence detected'

46 | Status | Processor | Nominal | N/A | 'Processor Presence detected'

47 | Status | Power Supply | Nominal | N/A | 'Presence detected'

48 | Current | Current | Nominal | A | 0.400000

49 | Current | Current | Nominal | A | 0.400000

50 | Voltage | Voltage | Nominal | V | 218.000000

51 | Voltage | Voltage | Nominal | V | 218.000000

52 | Status | Power Supply | Nominal | N/A | 'Presence detected'

53 | Status | Cable/Interconnect | Nominal | N/A | 'Cable/Interconnect is connected'

54 | OS Watchdog | Watchdog 2 | Nominal | N/A | 'OK'

56 | Intrusion | Physical Security | Nominal | N/A | 'OK'

57 | PS Redundancy | Power Supply | Nominal | N/A | 'Fully Redundant'

58 | Fan Redundancy | Fan | Nominal | N/A | 'Fully Redundant'

60 | System Level | Current | Nominal | W | 168.000000

61 | Power Optimized | OEM Reserved | Nominal | N/A | 'Good'

62 | Drive | Drive Slot | Nominal | N/A | 'Drive Presence'

65 | Cable SAS A | Cable/Interconnect | Nominal | N/A | 'Cable/Interconnect is connected'

66 | Cable SAS B | Cable/Interconnect | Nominal | N/A | 'Cable/Interconnect is connected'

67 | DKM Status | OEM Reserved | N/A | N/A | 'OEM Event = 0000h'

119 | FAN MOD 5A RPM | Fan | Nominal | RPM | 3480.000000

--------------------- end of debug output ---------------------IPMI Status: Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 737.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 738.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 749.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein concatenation (.) or string at ./check_ipmi_sensor line 750.

Use of uninitialized valuein string ne at ./check_ipmi_sensor line 759.

Critical [iDRAC6 Ent Pres= Critical ('Entity Absent'), System Board Intrusion = Critical (Physical Security), System Board Intrusion = Critical (Physical Security), Disk Drive Bay 1 Drive 2 = Critical (Drive Slot), Disk Drive Bay 1 Drive 2 = Critical (Drive Slot), System Board Ambient Temp = Warning (Temperature), Disk Drive Bay 1 Drive 2 = Critical (Drive Slot), Disk Drive Bay 1 Drive 2 = Critical (Drive Slot), Disk Drive Bay 1 Drive 2 = Critical (Drive Slot), Disk Drive Bay 1 Drive 2 = Critical (Drive Slot), System Board Intrusion = Critical (Physical Security), System Board Intrusion = Critical (Physical Security), System Board Intrusion = Critical (Physical Security), System Board Intrusion = Critical (Physical Security), System Board Ambient Temp = Warning (Temperature)] | 'Ambient Temp'=28.000000;:;: 'FAN MOD 1A RPM'=3480.000000;:;: 'FAN MOD 2A RPM'=3480.000000;:;: 'FAN MOD 3A RPM'=3480.000000;:;: 'FAN MOD 4A RPM'=3480.000000;:;: 'Current'=0.400000;:;: 'Current'=0.400000;:;: 'Voltage'=218.000000;:;: 'Voltage'=218.000000;:;: 'System Level'=168.000000;:;: 'FAN MOD 5A RPM'=3480.000000;:;:

Ambient Temp= 28.000000(Status: Nominal)

CMOS Battery= 'OK'(Status: Nominal)

VCORE PG= 'State Deasserted'(Status: Nominal)

VCORE PG= 'State Deasserted'(Status: Nominal)0.75 VTT PG = 'State Deasserted'(Status: Nominal)0.75 VTT PG = 'State Deasserted'(Status: Nominal)

CPU VTT PG= 'State Deasserted'(Status: Nominal)1.5V PG = 'State Deasserted'(Status: Nominal)1.8V PG = 'State Deasserted'(Status: Nominal)

5V PG= 'State Deasserted'(Status: Nominal)

MEM CPU2 FAIL= 'State Deasserted'(Status: Nominal)

5V Riser PG= 'State Deasserted'(Status: Nominal)

MEM CPU1 FAIL= 'State Deasserted'(Status: Nominal)

VTT CPU2 FAIL= 'State Deasserted'(Status: Nominal)

VTT CPU1 FAIL= 'State Deasserted'(Status: Nominal)0.9V PG = 'State Deasserted'(Status: Nominal)

CPU21.8 PLL PG = 'State Deasserted'(Status: Nominal)

CPU11.8 PLL PG = 'State Deasserted'(Status: Nominal)1.1 FAIL = 'State Deasserted'(Status: Nominal)1.0 LOM FAIL = 'State Deasserted'(Status: Nominal)1.0 AUX FAIL = 'State Deasserted'(Status: Nominal)

Heatsink Pres= 'Entity Present'(Status: Nominal)

iDRAC6 Ent Pres= 'Entity Absent'(Status: Critical)

USB Cable Pres= 'Entity Present'(Status: Nominal)

Riser Presence= 'Entity Present'(Status: Nominal)

FAN MOD 1A RPM= 3480.000000(Status: Nominal)

FAN MOD 2A RPM= 3480.000000(Status: Nominal)

FAN MOD 3A RPM= 3480.000000(Status: Nominal)

FAN MOD 4A RPM= 3480.000000(Status: Nominal)

Presence= 'Entity Present'(Status: Nominal)

Presence= 'Entity Present'(Status: Nominal)

Presence= 'Entity Present'(Status: Nominal)

Presence= 'Entity Present'(Status: Nominal)

Presence= 'Entity Present'(Status: Nominal)

Status= 'Processor Presence detected'(Status: Nominal)

Status= 'Processor Presence detected'(Status: Nominal)

Status= 'Presence detected'(Status: Nominal)

Current= 0.400000(Status: Nominal)

Current= 0.400000(Status: Nominal)

Voltage= 218.000000(Status: Nominal)

Voltage= 218.000000(Status: Nominal)

Status= 'Presence detected'(Status: Nominal)

Status= 'Cable/Interconnect is connected'(Status: Nominal)

OS Watchdog= 'OK'(Status: Nominal)

Intrusion= 'OK'(Status: Nominal)

PS Redundancy= 'Fully Redundant'(Status: Nominal)

Fan Redundancy= 'Fully Redundant'(Status: Nominal)

System Level= 168.000000(Status: Nominal)

Power Optimized= 'Good'(Status: Nominal)

Drive= 'Drive Presence'(Status: Nominal)

Cable SAS A= 'Cable/Interconnect is connected'(Status: Nominal)

Cable SAS B= 'Cable/Interconnect is connected'(Status: Nominal)

FAN MOD 5A RPM= 3480.000000(Status: Nominal)不过根据它的提示(其实插件也是调用如下命令)，可以使用/usr/sbin/ipmi-sel -h 10.103.1.100 --config-file ipmi.cfg --driver-type=LAN_2_0 --output-event-state --interpret-oem-data --entity-sensor-names执行结果是：

#/usr/sbin/ipmi-sel -h 10.103.1.100 --config-file ipmi.cfg --driver-type=LAN_2_0 --output-event-state --interpret-oem-data --entity-sensor-names

ID| Date | Time | Name | Type | State |Event1 | Apr-08-2011 | 06:42:13 | System Board SEL | Event Logging Disabled | Nominal | Log Area Reset/Cleared2 | Jan-01-1970 | 08:00:31 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off3 | Jan-01-1970 | 08:00:36 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off4 | Aug-15-2011 | 23:09:53 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h5 | Aug-16-2011 | 11:38:25 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h6 | Aug-16-2011 | 11:38:25 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h7 | Aug-16-2011 | 11:38:55 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h8 | Jun-10-2012 | 22:41:13 | System Board Ambient Temp | Temperature | Warning | Upper Non-critical - going high ; Sensor Reading = 45.00 C ; Threshold = 45.00C9 | Jun-11-2012 | 02:53:53 | System Board Ambient Temp | Temperature | Nominal | Upper Non-critical - going high ; Sensor Reading = 43.00 C ; Threshold = 45.00C10 | Nov-05-2012 | 21:56:42 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h11 | Nov-14-2012 | 21:53:58 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h12 | Nov-14-2012 | 21:53:58 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h13 | Nov-14-2012 | 21:54:19 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h14 | Nov-15-2012 | 16:12:03 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h15 | Nov-17-2012 | 17:14:34 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h16 | Nov-17-2012 | 17:14:34 | Disk Drive Bay 1 Drive 2 | Drive Slot | Critical | Drive Fault ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h17 | Nov-17-2012 | 17:15:40 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h18 | Nov-19-2012 | 20:47:57 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h19 | Nov-19-2012 | 20:50:04 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h20 | Jan-01-1970 | 08:00:33 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off21 | Jan-01-1970 | 08:00:38 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off22 | Jun-27-2014 | 17:27:38 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h23 | Jun-27-2014 | 17:27:53 | Disk Drive Bay 1 Drive 2 | Drive Slot | Nominal | Drive Presence ; OEM Event Data2 code = 01h ; OEM Event Data3 code =02h24 | Jan-01-1970 | 08:00:31 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off25 | Jan-01-1970 | 08:00:36 | System Board Intrusion | Physical Security | Critical | General Chassis Intrusion ; Intrusion whilesystem Off26 | Oct-31-2016 | 05:48:35 | System Board Ambient Temp | Temperature | Warning | Lower Non-critical - going low ; Sensor Reading = 8.00 C ; Threshold = 8.00C27 | Oct-31-2016 | 09:00:38 | System Board Ambient Temp | Temperature | Nominal | Lower Non-critical - going low ; Sensor Reading = 10.00 C ; Threshold = 8.00 C

weixin_39648430
关注
zabbix监控硬件及服务（详解）一
延瓒
05-30 2万+
大家好今天给大家带来zabbix3.4.8监控主机，那么最近由于我个人的关系。没有及时的更新文章所以，很抱歉那么今天我分享的内容是zabbix3.4.8监控服务器。本章的具体监控服务器如下： 服务器的CPU使用率 服务器的硬盘挂载使用率 服务器的网卡流量流入流出使用率 服务器的用户登录终端数量 Web服务器状态码检测 那么本章主要就是监控这几个方面。 搭建环境流程 安装c...
小白保姆级教程Zabbix监控ESXI的宿主机
最新发布
weixin_44517454的博客
07-04 1181
Zabbix监控ESXI主机，保姆级教程
基于Zabbix IPMI监控服务器硬件状况
weixin_34362875的博客
04-23 377
https://blog.csdn.net/ge_yulong/article/details/8307712
zabbix监控硬件
mimic的博客
08-09 2361
一）通过snmp监控 1、idrac上开启snmp服务 2、然后到zabbix server服务器上测试一下是否能get到数据： snmpget -v 2c -c .1.3.6.1.4.1.674.10892.2.1.1.2.0 3、 添加主机 二）通过在每台agent机器上安装openmanage（针对dell服务器的） 1、安装openmanage wget -q -O - htt...
使用Zabbix进行IPMI监控
qq_40907977的博客
04-06 9294
转载来源 ： 使用Zabbix进行IPMI监控 ：jianshu.com/p/b9c9b87cde82 IPMI监控 IPMI监控前，请确保服务器已配置IPMI地址，并开启IPMI功能。 1、安装IPMItool软件包 # yum -y install OpenIPMI OpenIPMI-devel ipmitoolfreeipmi 2、配置Zabbix 服务器端配置zabbix IPMI po...
[Zabbix] IPMI 监控
唐僧没有肉的博客
08-03 1万+
注意： 在安装zabbix服务器的时候需要带参数---with-openipmi ./configure --prefix=/usr/local/zabbix --enable-server--enable-agent --with-net-snmp --with-libcurl --enable-proxy--with-mysql=/usr/bin/mysql_config  ---wit
浪潮服务器查看硬件信息,zabbix通过ipmi传感器监控浪潮服务器的硬件信息
weixin_39621695的博客
08-06 1323
一：实验对象操作系统版本：centos7.6监控对象：通过服务器传感器获取到的所有在使用的硬件信息zabbix版本： 4.0.14二：zabbix介绍zabbix适合中小型企业、大型企业的用户使用。单个Server节点可以支持上万台设备，每秒可以处理1.5万次请求，理论上可以支持5万台设备。三：为什么要选择zabbix1、首先zabbix的几乎支持我们工作中的所有环境。2、其中zabbix的Ser...
zabbix 硬件功能_【Zabbix学习笔记】三、zabbix软硬件环境需求
weixin_39628063的博客
12-21 593
安装环境概述zabbix-server服务器运行的环境为Linux+Php+DataBase，PHP可以与Nginx或Apache组合使用，DataBase可以选择Mysql、Oracle、PostgreSQL等一、硬件环境需求对于最小化的安装环境，官方推荐的硬件配置如下表所示。环境平台CPU/内存数据库硬盘监控主机数小型CentOS2cpu/1GbMysql、InnoDB普通100中型CentO...
c语言硬件信息监控,zabbix通过ipmi传感器监控浪潮服务器的硬件信息
weixin_39856803的博客
05-22 313
一：实验对象操作系统版本：centos7.6监控对象：通过服务器传感器获取到的所有在使用的硬件信息zabbix版本： 4.0.14二：zabbix介绍zabbix适合中小型企业、大型企业的用户使用。单个Server节点可以支持上万台设备，每秒可以处理1.5万次请求，理论上可以支持5万台设备。三：为什么要选择zabbix1、 首先zabbix的几乎支持我们工作中的所有环境。2、 其中zabbix的S...
check_ipmi_sensor_v3:监视插件以检查IPMI传感器
05-18
check_ipmi_sensor-用于检查IPMI传感器的Nagios / Icinga插件 描述 使用此插件，可以使用Nagios，Icinga或Icinga 2监视服务器的硬件状态。具体地说，可以监视风扇速度，温度，电压，功耗，电源性能等。 要求 Nagios，Icinga或Icinga 2 FreeIPMI版本0.5.1或更高版本 Perl Perl IPC :: Run 安装提示 有关详细信息，安装说明和定义示例，请访问： 目标文件夹 将此插件复制到以下文件夹： /usr/lib/nagios/plugins/check_ipmi_sensor Debian / Ubuntu 安装缺少的库： apt-get install libipc-run-perl freeipmi CentOS的 安装缺少的库： yum install perl-IPC-Run freei
openbmc开发22：添加sensor信息到ipmi
master
08-29 1万+
前面说过如何添加sensor传感器信息(I2C、ADC、FAN），但是这些信息添加后是可以展示到web页面，如果不是编译原有的layer下的配置文件，而是自己适配board的layer，这些信息是不能通过ipmitool工具获取到的。name怎么才能把这些传感器信息添加到ipmi中呢？别着急，下面将一一道来。 1 ipmi配置文件转换成cpp 在软件包下有一个scripts文件夹，这里边是python脚本、模板、示例yaml文件以及使用说明，本问介绍sensor的yaml文件。在configure阶段，通过
zabbix监控硬件及服务（详解）二
cyx1834265118的博客
10-08 590
一.监控项：服务器进程数量 帮助 监控进程key proc.num[<name>,<user>,<state>,<cmdline>] Number of processes. <name> and <user> same as in proc.mem item. <state> all (default), run, sleep, zomb. <cmdline> filter by command l
zabbix 服务器硬件,Zabbix-ipmi监控服务器硬件
weixin_39846364的博客
07-31 664
一、准备工作1、在编译安装时，需要加入--with-openipmi2、编辑配置文件，添加如下配置(线程数可以任意修改，需要大于0)sed -i '145 aStartIPMIPollers=5' $ZABBIX_DIR/etc/zabbix_server.conf3、开启debug模式sed -i '61 aDebugLevel=4' $ZABBIX_DIR/etc/zabbix_server....
【sensor】三、温度传感器注册到IPMI
一如既往
01-08 520
待补充…
Zabbix5.0设置模板 （超详细解析）
weixin_48315478的博客
06-15 5026
Zabbix为用户提供了很多开箱即用的模板，具体模板可通过配置 → 模板网络设备的标准化模板)：对交换机和路由器等网络设备进行监控， 网络设备本身（基本上是机框）和网络接口机框故障监控（电源，风扇和温度，总体状态）机框性能监控（CPU和内存项）机框资产收集（序列号，型号名称，固件版本）使用IF-MIB和EtherLike-MIB进行网络接口监控（接口状态，接口流量负载，以太网的双工状态）HTTP模板：用于对很多服务的HTTP状态（UP/DOWN）进行监控，例如：Apache、Nginx等。
搭建Zabbix环境监控硬件与服务-No.1
ljw1211的博客
04-15 270
搭建Zabbix监控服务器状况-No.11.搭建Zabbix服务端安装阿里的yum源安装Zabbix-server需要的程序包创建Zabbix相应的数据库和用户导入Zabbix自带的SQL语句修改Zabbix服务器端的配置文件启动Zabbix服务并开机自启修改httpd的配置文件启动httpd服务&加入开机自启动配置Zabbix前端登录Zabbix2.搭建Zabbix客户端安装yum源修改...
zabbix3.0 模板和自定义键值
热门推荐
Hu_wen的专栏
12-05 1万+
zabbix3.0 模板和自定义键值 一、添加主机 1、Configuration---Hosts---Createhost Host name：这个应该是agent配置文件定义的Hostname，我们这是192.168.142.10。 Visible name：这个就是显示名称，自定义即可。 Group：将主机归类到哪个组中。 以下根据你选的监控方式来定义下面参数。...
搭建Zabbix环境监控硬件与服务-No.4
ljw1211的博客
04-16 311
监控Cpu空闲情况并发送告警邮件 该部分主要使用到zabbix的触发器，触发器可以创建在各个主机对应的触发器列表中，也可以将一部分共有的触发器创建在模板中，这样就不需要对每个主机都进行创建触发器–>创建动作等繁琐的动作了。 以下操作基于模板的触发器创建，各主机的触发器创建雷同。 配置对应模板触发器 使用的模板：Template OS Linux by Zabbix agent ##根据实际...
Zabbix硬件与系统监控全面指南
"本文将详细介绍如何搭建Zabbix监控系统，涵盖硬件和系统层面的监控，包括IPMI远程控制卡的使用、系统性能基准线的了解以及CPU、内存、硬盘和网络I/O的监控方法。" 在搭建Zabbix监控的过程中，首先要理解监控的分类...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值