一、使用time中的sleep
这种方式最简单,在循环里放入要执行的任务,然后sleep一段时间在执行
from datetime importdatetimeimporttime#每n秒执行一次
deftimer(n):whileTrue:print(datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
time.sleep(n)#5s
timer(5)
这个方法的缺点是:只能执行固定时间间隔的任务,如果有定时任务就无法完成,比如早上六点半喊我起床,并且sleep是一个阻塞函数,也就是在sleep的这段时间只能等待,什么是也做不了
二、threading模块中的Timer
threading模块中的Timer是一个非阻塞函数,比sleep稍好一点,不过依然无法叫你起床
from datetime importdatetimefrom threading importTimer#打印时间函数
defprintTime(n):print(datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
t=Timer(n, printTime, (n,))
t.start()#2s
printTime(2)
Timer类第一个参数是时间间隔(单位是秒),第二个参数是要盗用的函数名,第三个参数调用函数的参数(是一个tuple)
三、sched模块
sched模块是python内置的模块,它是一个调度(延时处理机制),每次想要定时执行某任务必须要写一个调度
importschedimporttimefrom datetime importdatetime#初始化sched模块的 scheduler 类#第一个参数是一个可以返回时间戳的函数,第二个参数可以在定时未到达之前阻塞。
schedule =sched.scheduler(time.time, time.sleep)#被周期性调度触发的函数
defprintTime(n):print(datetime.now().strftime("%Y-%m-%d %H:%M:%S"))
schedule.enter(n, 0, printTime, (n,))#每隔10秒执行一个printTime函数
#默认参数5s
def main(n=5):#enter四个参数分别为:间隔时间、优先级(用于同时间到达的两个事件同时执行时定序)、被调用触发的函数,
#给该触发函数的参数(tuple形式)
schedule.enter(6, 0, printTime, (n,)) #6秒后执行一次printTime函数
schedule.run()#10s 输出一次
main(10)
sched 使用步骤如下:
(1)生成调度器:
s = sched.scheduler(time.time,time.sleep)
第一个参数是一个可以返回时间戳的函数,第二个参数可以在定时未到达之前阻塞。
(2)加入调度事件
其实有 enter、enterabs 等等,我们以 enter 为例子。
s.enter(x1,x2,x3,x4)
四个参数分别为:间隔事件、优先级(用于同时间到达的两个事件同时执行时定序)、被调用触发的函数,给触发函数的参数(注意:一定要以 tuple 给,如果只有一个参数就(xx,))
(3)运行
s.run()
注意: sched 模块不是循环的,一次调度被执行后就 Over 了,如果想再执行,请再次 enter
四、APScheduler定时框架
终于到了你要找的可以叫你起床的定时任务了
APScheduler是一个python定时任务框架,使用起来也十分方面,提供了基于日期,固定时间 间隔以及crontab类型的任务,并且可以持久化任务,兵役daemon(守护进程)方式运行应用
使用APSchduler模块需要先进性安装
pip3 install apscheduler
下面是实现一个在周一到周五指定的时刻执行任务
from apscheduler.schedulers.blocking importBlockingSchedulerfrom datetime importdatetime#输出时间
defjob():print(datetime.now().strftime("%Y-%m-%d %H:%M:%S")) #周一到周五的上午十点四十三分叫我起床
#BlockingScheduler
scheduler =BlockingScheduler()
scheduler.add_job(job,'cron', day_of_week='1-5', hour=10, minute=43)
scheduler.start()
上述内容进行说明:
代码中的 BlockingScheduler 是什么呢?
BlockingScheduler 是 APScheduler 中的调度器,APScheduler 中有两种常用的调度器,BlockingScheduler 和 BackgroundScheduler,当调度器是应用中唯一要运行的任务时,使用 BlockingSchedule,如果希望调度器在后台执行,使用 BackgroundScheduler。
1 BlockingScheduler: use when the scheduler is the only thing running inyour process2 BackgroundScheduler: use when you’re not using any of the frameworks below, and want the scheduler to run inthe background inside your application3 AsyncIOScheduler: use ifyour application uses the asyncio module4 GeventScheduler: use ifyour application uses gevent5 TornadoScheduler: use ifyou’re building a Tornado application6 TwistedScheduler: use ifyou’re building a Twisted application7 QtScheduler: use if you’re building a Qt application
上面的列子已经满足我们的基本使用,如果想深入了解请看下面内容:
APScheduler四个组件
APScheduler 四个组件分别为:触发器(trigger),作业存储(job store),执行器(executor),调度器(scheduler)。
触发器(trigger)
包含调度逻辑,每一个作业有它自己的触发器,用于决定接下来哪一个作业会运行。除了他们自己初始配置意外,触发器完全是无状态的
APScheduler 有三种内建的 trigger:
date: 特定的时间点触发
interval: 固定时间间隔触发
cron: 在特定时间周期性地触发
作业存储(job store)
存储被调度的作业,默认的作业存储是简单地把作业保存在内存中,其他的作业存储是将作业保存在数据库中。一个作业的数据讲在保存在持久化作业存储时被序列化,并在加载时被反序列化。调度器不能分享同一个作业存储。
APScheduler 默认使用 MemoryJobStore,可以修改使用 DB 存储方案
执行器(executor)
处理作业的运行,他们通常通过在作业中提交制定的可调用对象到一个线程或者进城池来进行。当作业完成时,执行器将会通知调度器。
最常用的 executor 有两种:
ProcessPoolExecutor
ThreadPoolExecutor
调度器(scheduler)
通常在应用中只有一个调度器,应用的开发者通常不会直接处理作业存储、调度器和触发器,相反,调度器提供了处理这些的合适的接口。配置作业存储和执行器可以在调度器中完成,例如添加、修改和移除作业。
配置调度器
APScheduler提供了许多不同的方式来配置调度器,你可以使用一个配置字典或者作为参数关键字的方式传入。你也可以先创建调度器,再配置和添加作业,这样你可以在不同的环境中得到更大的灵活性。
执行时间间隔执行一次任务
from apscheduler.schedulers.blocking importBlockingSchedulerfrom datetime importdatetimedeffunc():print(datetime.now().strftime("%Y-%m-%d %H:%M:%S"))#定义BlockingScheduler
sched =BlockingScheduler()
sched.add_job(func,'interval', seconds=5) #每个5秒执行一次func函数
sched.start()
上述代码创建了一个 BlockingScheduler,并使用默认内存存储和默认执行器。(默认选项分别是 MemoryJobStore 和 ThreadPoolExecutor,其中线程池的最大线程数为10)。配置完成后使用 start() 方法来启动。
如果想要显式设置 job store(使用mongo存储)和 executor 可以这样写:
from datetime importdatetimefrom pymongo importMongoClientfrom apscheduler.schedulers.blocking importBlockingSchedulerfrom apscheduler.jobstores.memory importMemoryJobStorefrom apscheduler.jobstores.mongodb importMongoDBJobStorefrom apscheduler.executors.pool importThreadPoolExecutor, ProcessPoolExecutor#MongoDB 参数
host = '127.0.0.1'port= 27017client=MongoClient(host, port)#输出时间
deffunc():print(datetime.now().strftime("%Y-%m-%d %H:%M:%S"))#存储方式
jobstores ={'mongo': MongoDBJobStore(collection='test', database='local', client=client),'default': MemoryJobStore()
}
executors={'default': ThreadPoolExecutor(10),'processpool': ProcessPoolExecutor(3)
}
job_defaults={'coalesce': False,'max_instances': 3}
scheduler= BlockingScheduler(jobstores=jobstores, executors=executors, job_defaults=job_defaults)
scheduler.add_job(func,'interval', seconds=5, jobstore='mongo') #每隔5秒执行一个func函数
scheduler.start()
在运行程序5秒后,第一次输出时间。
在 MongoDB 中可以看到 job 的状态
对 job 的操作
添加 job
添加job有两种方式:
add_job()
scheduled_job()
第二种方法只适用于应用运行期间不会改变的 job,而第一种方法返回一个apscheduler.job.Job 的实例,可以用来改变或者移除 job。
from apscheduler.schedulers.blocking importBlockingScheduler
sched=BlockingScheduler()#装饰器
@sched.scheduled_job('interval', id='my_job_id', seconds=5)defjob_function():print("Hello World")#开始
sched.start()
@sched.scheduled_job() 是 Python 的装饰器。
移除 job
移除 job 也有两种方法:
remove_job()
job.remove()
remove_job 使用 jobID 移除
job.remove() 使用 add_job() 返回的实例
job = scheduler.add_job(myfunc, 'interval', minutes=2)
job.remove()#id
scheduler.add_job(myfunc, 'interval', minutes=2, id='my_job_id')
scheduler.remove_job('my_job_id')
暂停和恢复 job
暂停一个 job:
apscheduler.job.Job.pause()
apscheduler.schedulers.base.BaseScheduler.pause_job()
恢复一个 job:
apscheduler.job.Job.resume()
apscheduler.schedulers.base.BaseScheduler.resume_job()
希望你还记得 apscheduler.job.Job 是 add_job() 返回的实例
获取 job 列表
获得可调度 job 列表,可以使用get_jobs() 来完成,它会返回所有的 job 实例。
也可以使用print_jobs() 来输出所有格式化的 job 列表。
修改 job
除了 jobID 之外 job 的所有属性都可以修改,使用 apscheduler.job.Job.modify() 或者 modify_job() 修改一个 job 的属性
job.modify(max_instances=6, name='Alternate name')
modify_job('my_job_id', trigger='cron', minute='*/5')
关闭 job
默认情况下调度器会等待所有的 job 完成后,关闭所有的调度器和作业存储。将 wait 选项设置为 False 可以立即关闭。
scheduler.shutdown()
scheduler.shutdown(wait=False)
scheduler 事件
scheduler 可以添加事件监听器,并在特殊的时间触发。
defmy_listener(event):ifevent.exception:print('The job crashed :(')else:print('The job worked :)')#添加监听器
scheduler.add_listener(my_listener, EVENT_JOB_EXECUTED | EVENT_JOB_ERROR)
trigger 规则
最基本的一种调度,作业只会执行一次。它的参数如下:
run_date (datetime|str) – the date/time to run the job at
timezone (datetime.tzinfo|str) – time zone for run_date if it doesn’t have one already
from datetime importdatefrom apscheduler.schedulers.blocking importBlockingScheduler
sched=BlockingScheduler()defmy_job(text):print(text)#The job will be executed on November 6th, 2009
sched.add_job(my_job, 'date', run_date=date(2009, 11, 6), args=['text'])
sched.add_job(my_job,'date', run_date=datetime(2009, 11, 6, 16, 30, 5), args=['text'])
sched.add_job(my_job,'date', run_date='2009-11-06 16:30:05', args=['text'])#The 'date' trigger and datetime.now() as run_date are implicit
sched.add_job(my_job, args=['text'])
sched.start()
year (int|str) – 4-digit year
month (int|str) – month (1-12)
day (int|str) – day of the (1-31)
week (int|str) – ISO week (1-53)
day_of_week (int|str) – number or name of weekday (0-6 or mon,tue,wed,thu,fri,sat,sun)
hour (int|str) – hour (0-23)
minute (int|str) – minute (0-59)
second (int|str) – second (0-59)
start_date (datetime|str) – earliest possible date/time to trigger on (inclusive)
end_date (datetime|str) – latest possible date/time to trigger on (inclusive)
timezone (datetime.tzinfo|str) – time zone to use for the date/time calculations (defaults to scheduler timezone)
表达式:
from apscheduler.schedulers.blocking importBlockingSchedulerdefjob_function():print("Hello World")#BlockingScheduler
sched =BlockingScheduler()#Schedules job_function to be run on the third Friday#of June, July, August, November and December at 00:00, 01:00, 02:00 and 03:00
sched.add_job(job_function, 'cron', month='6-8,11-12', day='3rd fri', hour='0-3')#Runs from Monday to Friday at 5:30 (am) until 2014-05-30 00:00:00
sched.add_job(job_function, 'cron', day_of_week='mon-fri', hour=5, minute=30, end_date='2014-05-30')
sched.start()
参数:
weeks (int) – number of weeks to wait
days (int) – number of days to wait
hours (int) – number of hours to wait
minutes (int) – number of minutes to wait
seconds (int) – number of seconds to wait
start_date (datetime|str) – starting point for the interval calculation
end_date (datetime|str) – latest possible date/time to trigger on
timezone (datetime.tzinfo|str) – time zone to use for the date/time calculations
from datetime importdatetimefrom apscheduler.schedulers.blocking importBlockingSchedulerdefjob_function():print("Hello World")#BlockingScheduler
sched =BlockingScheduler()#Schedule job_function to be called every two hours
sched.add_job(job_function, 'interval', hours=2)#The same as before, but starts on 2010-10-10 at 9:30 and stops on 2014-06-15 at 11:00
sched.add_job(job_function, 'interval', hours=2, start_date='2010-10-10 09:30:00', end_date='2014-06-15 11:00:00')
sched.start()