一:安装Nginx
1,添加一个不能登录且没有主目录的用户:
1 # useradd www -M -s /sbin/nologin(www可以用nginx,说明是nginx用户)
2,必要的组件
# wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.13.zip# unzip pcre-8.13.zip# cd pcre-8.13# ./configure# make && make install
(如果有错误提示:
./configure: error: the HTTP rewrite module requires the PCRE library.
请按照下面的安装方法:
安装pcre-devel与openssl-devel解决问题
yum -y install pcre-devel openssl openssl-devel)
MGB,安装出现一个问题 make: *** No rule to make target `build', needed by `default'. Stop.,莫名的奇妙;
安装make:yum -y install gcc automake autoconf libtool make
安装g++:yum install gcc gcc-c++
yum -y install openssl openssl-devel
3,编译nginx并安装# tar -zxvf nginx-1.3.9.tar.gz# cd nginx-1.3.9# ./configure --prefix=/opt/nginx --user=www --group=www --with-http_stub_status_module --with-http_ssl_module --with-pcre=/usr/local/src/pcre-8.34# make && make install--with-pcre 后面的路径 为源码包解压后的路径,而不是安装路径,否则会报错![2].安装PHP1,安装必要的组件# yum -y install libjpeg-devel libpng-devel# wget ftp://mcrypt.hellug.gr/pub/crypto/mcrypt/libmcrypt/libmcrypt-2.5.8.tar.gz(下载,这个路径不一定正确,可以通过其他方法下载)# tar -zxvf libmcrypt-2.5.8.tar.gz# cd libmcrypt-2.5.8# ./configure# make && make install==64位系统==1 # ln -s /usr/lib64/mysql/ /usr/lib/mysql==64位系统==二:编译php并安装# cd php-5.4.9# ./configure --prefix=/opt/php --with-iconv --with-zlib --enable-xml --disable-rpath --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-mbstring --with-mcrypt ='对于libmcrypt的安装目录' --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --without-pear --with-mysql --with-mysqli --enable-sqlite-utf8 --with-pdo-mysql --enable-ftp --with-jpeg-dir --with-freetype-dir --with-png-dir --enable-fpm --with-fpm-user=www --with-fpm-group=www# make && make install
相关错误解决:
checking for cURL in default path... not foundconfigure: error: Please reinstall the libcurl distribution -easy.h should be in /include/curl/
其实就是curl的dev包没有安装, 解决方案:终端下# yum -y install curl-devel
然后就可以继续了
在CentOS编译PHP5的时候有时会遇到以下的一些错误信息,基本上都可以通过yum安装相应的库来解决。以下是具体的一些解决办法:checking for BZip2 support… yes checking for BZip2 in default path… not found configure: error: Please reinstall the BZip2 distribution
Fix: yum install bzip2-develchecking for cURL support… yes checking if we should use cURL for url streams… no checking for cURL in default path… not found configure: error: Please reinstall the libcurl distribution – easy.h should be in/include/curl/
Fix: yum install curl-devel
checking for curl_multi_strerror in -lcurl… yes checking for QDBM support… no checking for GDBM support… no checking for NDBM support… no configure: error: DBA: Could not find necessary header file(s).
Fix: yum install db4-develchecking for fabsf… yes checking for floorf… yes configure: error: jpeglib.h not found.
Fix: yum install libjpeg-develchecking for fabsf… yes checking for floorf… yes checking for jpeg_read_header in -ljpeg… yes configure: error: png.h not found.
Fix: yum install libpng-develchecking for png_write_p_w_picpath in -lpng… yes If configure fails try –with-xpm-dir=
Fix: Reconfigure your PHP with the following option. --with-xpm-dir=/usrchecking for png_write_p_w_picpath in -lpng… yes configure: error: libXpm.(a|so) not found.
Fix: yum install libXpm-develchecking for bind_textdomain_codeset in -lc… yes checking for GNU MP support… yes configure: error: Unable to locate gmp.h
Fix: yum install gmp-develchecking for utf8_mime2text signature… new checking for U8T_DECOMPOSE… configure: error: utf8_mime2text() has new signature, but U8T_CANONICAL is missing. This should not happen. Check config.log for additional information.
Fix: yum install libc-client-develchecking for LDAP support… yes, shared checking for LDAP Cyrus SASL support… yes configure: error: Cannot find ldap.h
Fix: yum install openldap-develchecking for mysql_set_character_set in -lmysqlclient… yes checking for mysql_stmt_next_result in -lmysqlclient… no checking for Oracle Database OCI8 support… no checking for unixODBC support… configure: error: ODBC header file ‘/usr/include/sqlext.h’ not found!
Fix:
yum install unixODBC-develchecking for PostgreSQL support for PDO… yes, shared checking for pg_config… not found configure: error: Cannot find libpq-fe.h. Please specify correct PostgreSQL installation path
Fix: yum install postgresql-develchecking for sqlite 3 support for PDO… yes, shared checking for PDO includes… (cached) /usr/local/src/php-5.3.7/ext checking for sqlite3 files in default path… not found configure: error: Please reinstall the sqlite3 distribution
Fix: yum install sqlite-develchecking for utsname.domainname… yes checking for PSPELL support… yes configure: error: Cannot find pspell
Fix: yum install aspell-develchecking whether to enable UCD SNMP hack… yes checking for default_store.h… no
checking for kstat_read in -lkstat… no checking for snmp_parse_oid in -lsnmp… no checking for init_snmp in -lsnmp… no configure: error: SNMP sanity check failed. Please check config.log for more information.
Fix: yum install net-snmp-develchecking whether to enable XMLWriter support… yes, shared checking for xml2-config path… (cached) /usr/bin/xml2-config checking whether libxml build works… (cached) yes checking for XSL support… yes, shared configure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution
Fix: yum install libxslt-develconfigure: error: xml2-config not found. Please check your libxml2 installation.
Fix: yum install libxml2-develchecking for PCRE headers location… configure: error: Could not find pcre.h in /usr
Fix: yum install pcre-develconfigure: error: Cannot find MySQL header files under yes. Note that the MySQL client library is not bundled anymore!
Fix: yum install mysql-develchecking for unixODBC support… configure: error: ODBC header file ‘/usr/include/sqlext.h’ not found!
Fix: yum install unixODBC-develchecking for pg_config… not found configure: error: Cannot find libpq-fe.h. Please specify correct PostgreSQL installation path
Fix:
yum install postgresql-develconfigure: error: Cannot find pspell
Fix: yum install pspell-develconfigure: error: Could not find net-snmp-config binary. Please check your net-snmp installation.
Fix: yum install net-snmp-develconfigure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution
Fix: yum install libxslt-devel
3,拷贝和修改php配置文件# cp php.ini-production /opt/php/lib/php.ini 或是/usr/local/lib/php.ini# cp /opt/php/etc/php-fpm.conf.default /opt/php/etc/php-fpm.conf# /opt/php/bin/php --ini //测试ini文件是否加载修改php.ini[PHP]safe_mode = Onregister_globals = Offmagic_quotes_gpc = Offallow_url_fopen = Offallow_url_include = Offexpose_php=Offdisable_functions = shell_exec,system,exec,passthru,show_source,curl_exec,curl_multi_exec,get_cfg_var[Date]date.timezone = “Asia/Shanghai”修改php-fpm.conf[global]pid = run/php-fpm.piderror_log = log/php-fpm.loglog_level = noticeemergency_restart_threshold = 0emergency_restart_interval = 0[www]pm.start_servers = 20pm.min_spare_servers = 5pm.max_spare_servers = 35(不能大于max_children)pm.max_requests = 5004,添加服务启动脚本# cp nginx /etc/init.d/nginx# cp php-fpm /etc/init.d/php-fpm# chmod 755 /etc/init.d/nginx# chmod 755 /etc/init.d/php-fpm# chkconfig --add nginx# chkconfig --add php-fpm# chkconfig nginx on# chkconfig php-fpm on
三:安装Mysql3.1, 创建mysql安装目录1 # mkdir -p /opt/mysql/3.2, 创建数据存放目录1 # mkdir -p /data/mysql/3.3, 创建用户和用户组与赋予数据存放目录权限# useradd mysql -M -s /sbin/nologin# chown mysql.mysql -R /data/mysql/3.4, 安装必要的组件# yum -y install cmake# yum -y install ncurses-devel3.5, 编译安装Mysql
tar -zxvf mysql-5.5.28.tar.gz
cd mysql-5.5.28
cmake . -DCMAKE_INSTALL_PREFIX=/opt/mysql -DMYSQL_UNIX_ADDR=/data/mysql/mysql.sock -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_EXTRA_CHARSETS:STRING=utf8,gbk -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DENABLED_LOCAL_INFILE=1 -DMYSQL_DATADIR=/data/mysql -DMYSQL_USER=mysql -DMYSQL_TCP_PORT=3306# make && make install
安装完mysql服务器运行正常,但无法使用gbk字符集,系统装了中文支持,mysql重装了几次都不行.show character set里没有gbk;set names gbk 就提示错误 #1115 - Unknown character set: 'gbk'------------解决方案:上面的编译参数-DWITH_EXTRA_CHARSETS:STRING=utf8,gbk这个参数引起的问题方法一、去掉这个参数,默认值是支持all的charset方法二、直接改为-DWITH_EXTRA_CHARSETS=all
加入-DDEFAULT_COLLATION=utf8_general_ci选项后,启动mysql可能会有问题,须在my.cnf 文件 [mysqld]加入
character_set_server=utf8
3.6, 初始化数据库# cd /opt/mysql# scripts/mysql_install_db --user=mysql --basedir=/opt/mysql --datadir=/data/mysql/3.7, 配置环境# cp support-files/my-medium.cnf /etc/my.cnf(这里的my.cnf参考服务器的内存大小 一般my-medium.cnf是256M,my-large.cnf是512M)# cp support-files/mysql.server /etc/init.d/mysql# chmod 755 /etc/init.d/mysql# chkconfig mysql on# export PATH=/opt/mysql/bin:$PATH //设置环境变量3.8, 启动并设置初始密码# /etc/init.d/mysql start# mysqladmin -uroot password '123123'进行再修改密码的语句1: UPDATE mysql.user SET Password = PASSWORD(‘newpwd’) WHERE User = ‘root’;(生新设置密码)
2: flush privileges;(刷新权限)
注:mysql日志文件保存在/data/mysql/下面,对应数据文件保存的路径(比如.err)。
四:安装memcached
1.下载libevent和memcached
2.安装libeventtar -zxvf libevent-2.0.18-stable.tar.gz
cd libevent-2.0.18-stable
./configure --prefix=/usr/local/libevent
make && make install
cd ../
3.安装memcachedtar -zxvf memcached-1.4.13.tar.gz
cd memcached-1.4.13
./configure --prefix=/usr/local/memcached --with-libevent=/usr/local/libevent/
make && make install
cd ..
4:安装Memcache的PHP扩展
(1).在http://pecl.php.net/package/memcache 选择相应想要下载的memcache版本。 (2).安装PHP的memcache扩展tar vxzf memcache-2.2.6.tar.gz cd memcache-2.2.6/usr/local/php/bin/phpize ./configure –enable-memcache –with-php-config=/usr/local/php/bin/php-config –with-zlib-dir make make install
(3).上述安装完后会有类似这样的提示:Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-non-zts-20100525/
(4).把php.ini中的extension_dir = “./”修改为extension_dir = “/usr/local/php/lib/php/extensions/no-debug-non-zts-20100525/”
(5).添加一行来载入memcache扩展:extension=memcache.so
5.启动并加入启动项/usr/local/memcached/bin/memcached -d -l 192.168.1.2 -u www -m 512 -c 10240 -p 12000 -P /tmp/memcached.pid
将以上加入到/etc/rc.local方便下次自动启动
*注:用户-u必须指定,在此处示例所用的是WEB用户www
6.使用telnet查看状态telnet 192.168.1.2 12000
stats #查看运行状态
quit #退出
附注:
php5.4.9启动命令:/opt/php/sbin/php-fpm
检测php运行进程ps aux|grep php-fpm
php-fpm 关闭:
kill -INT `cat /usr/local/php/var/run/php-fpm.pid`
关闭后,需要/opt/php/sbin/php-fpm启动;没有php-fpm.pid就用touch创建。php-fpm 重启:
kill -USR2 `cat /usr/local/php/var/run/php-fpm.pid`
Nginx 服务启动命令:/opt/nginx/sbin/nginx
语法检测 /opt/nginx/sbin/nginx -t检测nginx.conf文件语法;
php启动报错:
ERROR: [pool www] cannot get uid for user 'fpm'
需要在php-fpm上改动user=fpm
group=fpm
fpm改成nginx;(安装nginx的用户)