linux raw 裸设备,Linux RAW DEVICE 裸设备

在学rac的时候,发现这个东西,找了些资料放在这。

-----------------------------------------------------------

在linux上使用raw device一般有两个方式,下面分别测试一下:

第一种方式是非lvm方式,直接使用partion方式如下:

一,创建分区

[root@localhost ~]# fdisk -l

Disk /dev/sda: 12.8 GB, 12884901888 bytes

255 heads, 63 sectors/track, 1566 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sda1 * 1 64 514048+ 83 Linux

/dev/sda2 65 1174 8916075 83 Linux

/dev/sda3 1175 1435 2096482+ 82 Linux swap

/dev/sda4 1436 1566 1052257+ 5 Extended

/dev/sda5 1436 1566 1052226 83 Linux

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb doesn't contain a valid partition table

Disk /dev/sdc: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdc doesn't contain a valid partition table

[root@localhost oracle]# fdisk /dev/sdb

The number of cylinders for this disk is set to 1044.

There is nothing wrong with that, but this is larger than

1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of

LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Warning: invalid flag 0x0000 of partition table 4 will be corrected

by w(rite)

Command (m for help): m

Command action

a toggle a bootable flag

b edit bsd disklabel

c toggle the dos compatibility flag

d delete a partition

l list known partition types

m print this menu

n add a new partition

o create a new empty DOS partition table

p print the partition table

q quit without saving changes

s create a new empty Sun disklabel

t change a partition's system id

u change display/entry units

v verify the partition table

w write table to disk and exit

x extra functionality (experts only)

Command (m for help): n p

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

Command (m for help): n

Command action

e extended

p primary partition (1-4)

p

Partition number (1-4): 1

First cylinder (1-1044, default 1): 65

Last cylinder or +size or +sizeM or +sizeK (65-1044, default

1044):

Using default value 1044

Command (m for help): p

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdb1 65 1044 7871850 83 Linux

Command (m for help): p

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdb1 65 1044 7871850 83 Linux

Command (m for help): h

h: unknown command

Command action

a toggle a bootable flag

b edit bsd disklabel

c toggle the dos compatibility flag

d delete a partition

l list known partition types

m print this menu

n add a new partition

o create a new empty DOS partition table

p print the partition table

q quit without saving changes

s create a new empty Sun disklabel

t change a partition's system id

u change display/entry units

v verify the partition table

w write table to disk and exit

x extra functionality (experts only)

Command (m for help): d

Selected partition 1

Command (m for help): p

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

Command (m for help): n

Command action

e extended

p primary partition (1-4)

1 p

Partition number (1-4): 1

First cylinder (1-1044, default 1): 1

Last cylinder or +size or +sizeM or +sizeK (1-1044, default 1044):

65

Command (m for help): p

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdb1 1 65 522081 83 Linux

Command (m for help): n

Command action

e extended

p primary partition (1-4)

p

Partition number (1-4): 2

First cylinder (66-1044, default 66):

Using default value 66

Last cylinder or +size or +sizeM or +sizeK (66-1044, default 1044):

130

Command (m for help): n

Command action

e extended

p primary partition (1-4)

3

Invalid partition number for type `3'

Command action

e extended

p primary partition (1-4)

p

Partition number (1-4): 3

First cylinder (131-1044, default 131):

Using default value 131

Last cylinder or +size or +sizeM or +sizeK (131-1044, default

1044): 196

Command (m for help): n

Command action

e extended

p primary partition (1-4)

p

Selected partition 4

First cylinder (197-1044, default 197): 4

Value out of range.

First cylinder (197-1044, default 197):

Using default value 197

Last cylinder or +size or +sizeM or +sizeK (197-1044, default

1044): 262

Command (m for help): p

Disk /dev/sdb: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdb1 1 65 522081 83 Linux

/dev/sdb2 66 130 522112+ 83 Linux

/dev/sdb3 131 196 530145 83 Linux

/dev/sdb4 197 262 530145 83 Linux

二,绑定raw device

[root@localhost oracle]# raw /dev/raw/raw1 /dev/sdb1

/dev/raw/raw1: bound to major 8, minor 18

[root@localhost oracle]# raw /dev/raw/raw2 /dev/sdb2

/dev/raw/raw2: bound to major 8, minor 18

[root@localhost oracle]# raw /dev/raw/raw3 /dev/sdb3

/dev/raw/raw3: bound to major 8, minor 18

[root@localhost oracle]# raw /dev/raw/raw4 /dev/sdb4

/dev/raw/raw4: bound to major 8, minor 18

[root@localhost oracle]#vi /etc/sysconfig/rawdevices

在文件中加入如下内容:

/dev/raw/raw1 /dev/sdb1

/dev/raw/raw2 /dev/sdb2

/dev/raw/raw3 /dev/sdb4

/dev/raw/raw4 /dev/sdb4

另执行 /etc/init.d/rawdevices restart 使配置文件中的裸设备生效,执行 /sbin/chkconfig

rawdevices on 保证机器启动的时候裸设备能够加载。

三,授权

[root@localhost oracle]# chown -R oracle:dba /dev/raw/raw1

[root@localhost oracle]# chown -R oracle:dba /dev/raw/raw2

[root@localhost oracle]# chown -R oracle:dba /dev/raw/raw3

[root@localhost oracle]# chown -R oracle:dba /dev/raw/raw4

另修改配置文件/etc/udev/permissions.d/50-udev.permissions

注释掉raw/*:root:disk:0660,添加新行raw/*:oracle:dba:0660

此时,如绑定raw device,则默认权限为oracle:dba了。

--另如需要可以进行相应链接,

如ln -s /dev/raw/raw1

/u1/oracle/oradata/test10g/test_raw1.dbf,然后可以直接为oracle所用了。

另一种是lvm的方式,测试如下:

一,创建pv

[root@localhost ~]# pvcreate -M2 --metadatasize 100M /dev/sdb7

/dev/sdb8 /dev/sdb9 /dev/sdb10 /dev/sdc

Physical volume "/dev/sdb7" successfully created

Physical volume "/dev/sdb8" successfully created

Physical volume "/dev/sdb9" successfully created

Physical volume "/dev/sdb10" successfully created

Physical volume "/dev/sdc" successfully created

[root@localhost ~]# lvmdiskscan

/dev/ramdisk [ 16.00 MB]

/dev/ram [ 16.00 MB]

/dev/sda1 [ 502.00 MB]

/dev/ram2 [ 16.00 MB]

/dev/root [ 8.50 GB]

/dev/ram3 [ 16.00 MB]

/dev/sda3 [ 2.00 GB]

/dev/ram4 [ 16.00 MB]

/dev/ram5 [ 16.00 MB]

/dev/sda5 [ 1.00 GB]

/dev/ram6 [ 16.00 MB]

/dev/ram7 [ 16.00 MB]

/dev/ram8 [ 16.00 MB]

/dev/ram9 [ 16.00 MB]

/dev/ram10 [ 16.00 MB]

/dev/ram11 [ 16.00 MB]

/dev/ram12 [ 16.00 MB]

/dev/ram13 [ 16.00 MB]

/dev/ram14 [ 16.00 MB]

/dev/ram15 [ 16.00 MB]

/dev/sdb1 [ 980.50 MB]

/dev/sdb2 [ 980.53 MB]

/dev/sdb3 [ 1.92 GB]

/dev/sdb5 [ 509.84 MB]

/dev/sdb6 [ 549.07 MB]

/dev/sdb7 [ 509.84 MB] LVM physical volume

/dev/sdb8 [ 509.84 MB] LVM physical volume

/dev/sdb9 [ 549.07 MB] LVM physical volume

/dev/sdb10 [ 627.51 MB] LVM physical volume

/dev/sdb11 [ 1011.88 MB]

/dev/sdc [ 8.00 GB] LVM physical volume

3 disks

23 partitions

1 LVM physical volume whole disk

4 LVM physical volumes

二,创建vg

[root@localhost ~]# vgcreate vg_db1 /dev/sdc -s 128m

Volume group "vg_db1" successfully created

[root@localhost ~]# vgcreate vg_db2 /dev/sdc -s 128m

Volume group "vg_db2" successfully created

三,创建lv

[root@localhost ~]# lvcreate -L 512m -I 64k vg_db2 -n

lv_db2_02

Ignoring stripesize argument with single stripe

Logical volume "lv_db2_02" created

[root@localhost ~]# lvcreate -L 1024m -I 64k vg_db2 -n

lv_db2_03

Ignoring stripesize argument with single stripe

Logical volume "lv_db2_03" created

[root@localhost ~]# lvcreate -L 512m -I 64k vg_db2 -n

lv_db2_04

Ignoring stripesize argument with single stripe

Logical volume "lv_db2_04" created

[root@localhost ~]# lvcreate -L 2048m -I 64k vg_db2 -n

lv_db2_05

Ignoring stripesize argument with single stripe

Logical volume "lv_db2_05" created

四,绑定

[root@localhost ~]# raw /dev/raw/raw1

/dev/mapper/vg_db2-lv_db2_01

/dev/raw/raw4: bound to major 253, minor 5

[root@localhost ~]# raw /dev/raw/raw2

/dev/mapper/vg_db2-lv_db2_02

/dev/raw/raw4: bound to major 253, minor 5

[root@localhost ~]# raw /dev/raw/raw3

/dev/mapper/vg_db2-lv_db2_03

/dev/raw/raw4: bound to major 253, minor 5

[root@localhost ~]# raw /dev/raw/raw4

/dev/mapper/vg_db2-lv_db2_04

/dev/raw/raw4: bound to major 253, minor 5

后面授权等作业和第一种方式类同,上面要注意的是lv的命名方式,命名方式分解如下:

/dev/mapper/+ vgname + '-' + lvname.

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值