centos host在哪 local_centos怎么查看hostid

匿名用户

1级

2016-09-25 回答

天迁移以前的一个装有flexlm的虚拟机，结果发现在迁移后启动时报错

... Wrong hostid on SERVER line for license file

...

... SERVER line says 00e081787ba8, hostid is (Cannot get hostid of type 2 [])

... Invalid hostid on SERVER line1234

解决办法

从问题描述看，好像是取到hostid有问题，用lmhostid检查一下，发现取到的hostid为”“

./lmhostid

lmhostid - Copyright (c) 1989-2004 by Macrovision Corporation. All rights reserved.

The FLEXlm host ID of this machine is ""123

由于FLEXlm会使用第一块网卡(eth0)的mac地址做hostid，所以用ifconfig检查网络配置，发现其中没有eth0，如下：

eth1 Link encap:Ethernet HWaddr 00:E0:81:78:7B:A8

inet addr:192.168.0.88 Bcast:192.168.0.255 Mask:255.255.255.0

inet6 addr: fe80::2e0:81ff:fe78:7ba8/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:2463804 errors:0 dropped:0 overruns:0 frame:0

TX packets:345560 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:924819172 (881.9 MiB) TX bytes:34087357 (32.5 MiB)

Interrupt:11

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:65536 Metric:1

RX packets:2843863 errors:0 dropped:0 overruns:0 frame:0

TX packets:2843863 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:729294023 (695.5 MiB) TX bytes:729294023 (695.5 MiB)123456789101112131415161718

但是在用linux自带网络配置工具和/etc/sysconfig/network-scripts/下的文件配置看，确实是用的eth0。这说明配置出现了不一致问题。

最后，检查/etc/udev/rules.d/70-persistent-net.rules文件

# PCI device 0x1af4:0x1000 (virtio-pci)

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*l", ATTR{address}=="00:e0:81:78:7b:a8", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x10ec:0x8139 (8139cp)

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:e0:81:78:7b:a8", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"12345

发现了问题，里面有两个网卡配置项，果断修改为