树莓派dht11 python_树莓派连接dht11温度传感器获取温度(python)

# -*- coding: utf-8 -*-

import RPi.GPIO as gpio

import time

PORT=13 #使用的树莓派的PIN13也就是GPIO27，根据自己连接位置更改此参数

gpio.setwarnings(False)

gpio.setmode(gpio.BOARD)

time.sleep(1)

data=[]

def delay(i): #20*i usdelay

a=0

for j in range(i):

a+1

j=0

#start work

gpio.setup(PORT,gpio.OUT)

gpio.output(PORT,gpio.LOW)

time.sleep(0.02)

gpio.output(PORT,gpio.HIGH)

i=1

#wait to response

gpio.setup(PORT,gpio.IN)

while gpio.input(PORT)==1:

continue

while gpio.input(PORT)==0:

continue

while gpio.input(PORT)==1:

continue

#get data

while j<40:

k=0

while gpio.input(PORT)==0:

continue

while gpio.input(PORT)==1:

k+=1

if k>100:break

if k<3:

data.append(0)

else:

data.append(1)

j+=1

#get temperature

humidity_bit=data[0:8]

humidity_point_bit=data[8:16]

temperature_bit=data[16:24]

temperature_point_bit=data[24:32]

check_bit=data[32:40]

humidity=0

humidity_point=0

temperature=0

temperature_point=0

check=0

for i in range(8):

humidity+=humidity_bit[i]*2**(7-i)

humidity_point+=humidity_point_bit[i]*2**(7-i)

temperature+=temperature_bit[i]*2**(7-i)

temperature_point+=temperature_point_bit[i]*2**(7-i)

check+=check_bit[i]*2**(7-i)

tmp=humidity+humidity_point+temperature+temperature_point

if check==tmp:

print "temperature is ", temperature,"wet is ",humidity,"%"

else:

print "something is worong the humidity,humidity_point,temperature,temperature_point,check is",humidity,humidity_point,temperature,temperature_point,check