usb转串口在linux下显示的tttyusb0是输出端口吗,usb转虚拟串口枚举报错执行 ls –al /dev/ttyACM*命令只能出现ttyacm0~3，但ttyacm4，tt...-CSDN博客

我们的芯片外接了两个4G模块，num和acm驱动配置好了，开机启动后内核打印信息如下：

可以看出ncm驱动配置成功，usb0~5都可以显示出来，ttyacm方面只能显示0~3，ttyacm4，ttyacm5报错error。

error是这样的：

cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.0: ttyACM3: USB ACM device

cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm: probe of 1-1:1.2 failed with error -12

cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm: probe of 1-1:1.4 failed with error -12

部分内核打印信息如下：

cdc_acm 2-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 2-1:1.0: ttyACM0: USB ACM device

cdc_acm 2-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm 2-1:1.2: ttyACM1: USB ACM device

mmc1: new high speed SDHC card at address 59b4

mmcblk0: mmc1:59b4 NCard 14.8 GiB

cdc_acm 2-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm 2-1:1.4: ttyACM2: USB ACM device

mmcblk0: p1 p2 p3 p4

usb 2-1: MAC-Address: 0x00:0x00:0x11:0x12:0x13:0x14

cdc_ncm 2-1:1.6: usb0: register 'cdc_ncm' at usb-musb-hdrc.1-1, CDC NCM, 00:00:11:12:13:14

usb 2-1: MAC-Address: 0x00:0x00:0x11:0x12:0x13:0x16

cdc_ncm 2-1:1.8: usb1: register 'cdc_ncm' at usb-musb-hdrc.1-1, CDC NCM, 00:00:11:12:13:16

usb 2-1: MAC-Address: 0x00:0x00:0x11:0x12:0x13:0x18

cdc_ncm 2-1:1.10: usb2: register 'cdc_ncm' at usb-musb-hdrc.1-1, CDC NCM, 00:00:11:12:13:18

driver_probe_done entrance

driver_probe_done entrance 1

driver_probe_done entrance 2

name_to_dev_t entrance

name_to_dev_t done

driver_probe_done!!!

async_synchronize_full failed!!!

MOUNTING rootfs!!!

######################## root_mountflags = -1002344448

EXT3-fs: barriers not enabled

usb 1-1: new high speed USB device using musb-hdrc and address 2

usb 1-1: New USB device found, idVendor=8087, idProduct=095a

usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

usb 1-1: Product: L810

usb 1-1: Manufacturer: FIBOCOM

usb 1-1: SerialNumber: 004999010640000

cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.0: ttyACM3: USB ACM device

cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm: probe of 1-1:1.2 failed with error -12

cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm: probe of 1-1:1.4 failed with error -12

usb 1-1: MAC-Address: 0x00:0x00:0x11:0x12:0x13:0x14

cdc_ncm 1-1:1.6: usb3: register 'cdc_ncm' at usb-musb-hdrc.0-1, CDC NCM, 00:00:11:12:13:14

usb 1-1: MAC-Address: 0x00:0x00:0x11:0x12:0x13:0x16

cdc_ncm 1-1:1.8: usb4: register 'cdc_ncm' at usb-musb-hdrc.0-1, CDC NCM, 00:00:11:12:13:16

usb 1-1: MAC-Address: 0x00:0x00:0x11:0x12:0x13:0x18

cdc_ncm 1-1:1.10: usb5: register 'cdc_ncm' at usb-musb-hdrc.0-1, CDC NCM, 00:00:11:12:13:18

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0