最小均方误差均衡器的matlab仿真设计,最小均方误差均衡器的Matlab仿真设计

本文介绍了最小均方误差均衡器在数字通信中的关键作用,通过Matlab实现的仿真设计展示了其在消除码间干扰、优化传输特性的有效性。研究结果强调了MMSE均衡器在提高通信系统误码率控制和频谱效率方面的优势。
摘要由CSDN通过智能技术生成

最小均方误差均衡器的 Matlab 仿真设计 张丹丹 , 张  禾 , 刘慧芳 , 杨  婧 (西南石油大学 电子信息工程学院 , 四川 成都   610500) 摘  要 :随着集成电路与计算机技术的发展 ,数字通信以其特有的优越性已得到广泛应用。就数字通信而言 ,误码率和频谱效率是两个主要的系统衡量指标。由于常用信道传输特性不是理想的 ,数字信号经过传输后会产生严重的码间干扰 , 这对于接收机的正确判决非常不利 ,从而增加了通信的误码率 ,因此码间干扰的消除对提高通信系统的传输质量有重要意义。介绍基于最小均方误差准则的线性均衡器原理 ,利用 Matlab 对最小均方误差均衡器进行仿真设计 ,并对其性能进行分析。结果表明 ,最小均方误差均衡器能够有效消除码间干扰 ,增强基带传输系统的传输特性 ,是一种有效的均衡接收技术。 关键词 :码间干扰 ; 均衡器 ; 最小均方误差 ; Matlab 中图分类号 : TN911. 5234      文献标识码 :A      文章编号 :10042373X(2010) 190114203 Simulation Design of MMSE Equalizer Based on Matlab ZHANG Dan2dan , ZHAN G He , LIU Hui2fang , YANGJing(Electronics Information Engineering College , Southwest Petroleum University , Chengdu 610500 , China)Abstract : With the development of integrated circuit and computer technology , the digital communication because of itspeculiar advantage has been widely used. Spectrum efficiency and biterror2rate are two main indexes of measuring systems in the digital communication. Due to the characteristics of common transmission channels are not ideal , the digital signal produces serious intersymbol interference (ISI) after its transmission and increase the communication biterror2rate. This is very disadvantageous for the correct decision of the receiver. So , it′ s important to eliminate ISI for the improvement of transmission quality. The principle of linear equalizer based on MMSE is introduced. The simutation and design of MMSE equalizer is carried out with Matlab. Its performance is analyzed. The results show that

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值